In a data table, I need to sequence down a criteria list in Autofilter to the end. The list contains may contain either numberic or string dat, but no blanks. At each criterion, I need to copy the range and paste to another workbook. After reviewing many posts, I beleive I can create a VBA macro to do everything except sequencing.
View 2 RepliesI did a search to find a question similar to mine and I found this:
Copying data matching a criteria into another spreadsheet
This is exactly the same concept I am trying to accomplish, but don't know how to...at all. I couldn't follow the thread either.
I have a schedule which is constantly being updated (simplier version attached). I want to create a schedule, which will:
1) First ask which region to display the information for (I would like to create the same pop up menu to choose from)
2) Then, it will select only that region's information (all rows & columns) and copy them into a new worksheet and lists it all
-if you go back to the Master List, you can again choose another Region and it will create another new worksheet with that region's information
3) Don't know if this is making things more complicated, but at the bottom of the attached file, there are 3 lines under "Land".
Is it possible to list these under the same spreadsheet as the region it is pertaining to but classify it separately under "Land" (ie leaving space, so it is clear this is separate
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
I have been struggling with a way to use an IF statement that determines if a cell in column B = 1 then copy that cell and the two cells next to it to a cell starting in range B50. Once the condition is true would want it to copy another below and so on.
B C D E D
1 E10 Rear door failed BL OK
2 B4 Clearance light inop. KL OK
2 C1 Fire extinguisher date expired KL Ok
1 E1 Bumper falling off BL NO
The first and fourth row have a "1" in column B. So as a result these two rows meet the condition and want to copy just the cell in B thru D. Results would look like below
First entry copied to cell B50
1 E10 Rear door failed
1 E1 Bumper falling off
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
[Code].....
Attach is a sample of my project. I have to loop through B9:B80 in sheet("Raw Data") and capture the value of each cell. EG:
* if Value captured is 120A --> check with sheet("SP14F") from the row which contains the same value.
* i have to check that the aperture, outer and inner values of Layer 120A and so on..of the Raw Data sheet is the same as that of in the SP14F sheet.
* if the values are not the same, change the font to red
i understand that this task requires looping and arrays.
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
I have an Excel file ( book) that I use for scheduling my restaurant employees. There are currently formulas in place that retrieve information from cells on one sheet to a cell on another sheet. For example:
If, on the first sheet I schedule Joe the following section on Tuesday AM (D14), his name will be automatically shown on another sheet which list the section/floor plan in quick view.
I need a formula (on a third page) that will allow me to tell me how many times an individual employee has had this particular section. The sections are listed with a letter preceding it. Such as D**, P**, B**, SB**, etc.
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
I have a data sheet which has a number of columns
I am only interested in one of the column which is 'Type'. Within this column it specifies the type of order it is. I would like to count through the sheet and get a final count of the different order types on the other sheet, so if there are 56 instances of 'trace' orders then I would like this displaying on the other sheet as Trace = 56, and so on
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
[Code] ......
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
I have 2 sheets, sheet1 and sheet2. On sheet1 I have a cell (w,3) which displays either "OK" or "Needed". It will be like this for every row on the sheet. On sheet2 I have more information. I have been trying to create a macro or VB function that everytime the workbook is opened will scan the entire column W for any that say "needed" and if/when one is found copy the data in the cell in column A of the same row from sheet1 to column A of the first blank row in sheet2.
So say cell w,6 displays "needed", I then want to have cell a,6 copied from sheet1 to sheet2 into the first column A that is blank. I don't really care if when w,6 changes to "OK" it removes the entry on sheet2 or not, in fact if it does that would be great.
Here is the code that seems to be not so complicated and has copied information from one sheet to another, can't get it to work consistantly. I copied it off a similar post on this site and am not sure what the last value = "1" is doing but I doubt its helping my cause. The cell I need to trigger the action is in the 23 column, the cell I need copied is always in the first and the cell I need it to be copied into on the 2nd sheet is always in the first column as well. I'm pretty good with regular logical statements but I feel that a lack of knowledge about all the available commands is really whats hurting me on this....
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies View RelatedI have a bunch of data (by date) on one worksheet and I want to output results to another worksheet (in the same workbook). I want to be able to alter the rolling period for some financial calculations (thus the rolling period countdown). The code I've written doesn't suck the data from the second worksheet. The first worksheet is where vba is launched from. I've attached all the code.
Private Sub CommandButton1_Click()
Dim rowworking As Integer
Dim rowoutput As Integer
Dim rollingperiodcountdown As Integer
Dim Date1 As Date
Dim expectedreturn As Single
Dim returnwithedc As Single
Dim trackingdifference As Single
Dim returnwithbetamodulation As Single
Dim betamodulationtrackingdifference As Single
Dim improvement As Single
Dim x As Integer
Range("a5:g15000").Select
Selection.ClearContents
Range("a5").Select
For rowoutput = 5 To 500
Worksheets("Rolling Period").Activate
For rowworking = 3 To 15000
rollingperiodcountdown = Cells(rowworking, 9).....................
I'm newer in VBA. I will appreciate for help creating vba procedure. I would like to hide/show range of cells by that condition:
View 11 Replies View RelatedI am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies View Related1. I need a script to retrieve data (member number) from "Search List" worksheet and then to search it in "Members List" worksheet.
2. Once the search result (member number) found, e.g. 00311, it will copy the entire row to the "Only Selected" worksheet.
I have also attached a sample excel for better understanding.
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
I have a conditional cell that change color or not if condition...OK so far. Now, how can I change the color of a range of cells when condition is in just one cell. Ex:
If C15>=150, change (C3;C20) to yellow.
I really can't find the way to do it.
I populate a worksheet from an external source via a macro button. It populates columns A through K.
I then do an IF statement in 'L' to give a result 'East' or 'West' which differentiates between job locations.
I then want to move all the 'East' job to a separate worksheet and all the 'West' ones to another using another macro button.
I have been tasked with creating a data validation list. My data is contained on a separate sheet from my data validation list. I am using a named range to use the data for my data validation list. However, I am looking to add a criteria to my data validation list so that it only is populated with values based on another column on my data sheet.
For example, if I have a data sheet called "Employee" and I have two columns. Column A is a list of employee names and I have named a range in column A as "EmployeeName". Column B is used to define the category of employee. This value is a letter, for example, "A", "B", "C", or "D". This column does not have a named range as I don't know if I need one to get this to work.
I would like the data validation on one sheet to use a list of employees of a particular class from another sheet. Straight forward validation is easy using a validation list with a formula =EmployeeName. But how do I only list employees that have a category "A"? For some reason, I cannot get some of the formulas I have found while searching this message board to work.
I want to copy a range of data in a new sheet using a criteria. First i would like to choose a column, and second the criteria.If criteria in this column is meet , copy all rows in the range that meet that criteria in a new sheet named after the criteria .
View 9 Replies View RelatedI am copying from cell A2 to C2, then A8 to C8, etc. if the cell in column "A" contains the text "Item" until the end of data in column A. Here is what I am attempting:
Sub MoveItem()
sText = "Item"
sText = LCase(sText)
iMax = Cells.SpecialCells(xlCellTypeLastCell).Row
For i1 = iMax To 1 Step -1
If InStr(1, LCase(Cells(i1, 1)), sText) <> 0 Then
Cells(i1, 1).Copy Destination:=Cells(i1, 3)
End If
Next i1
End Sub
The problem is the destination location. If I define it as a Range eg: Cells(i1, 1).Copy Destination:=Range("C2") The macro works, but does not iterate the destination cell.
I am trying to copy a range of cells, based on a set of criteria that changes constantly.
In Column A, I have numerical values that are present every 10th cell. In columns B through D, I have various text data that corresponds to the number in Column A. So for example, in A50, I have the number 46975. In the range B50-D59, I have text data that goes with the number in A50.
Each day I run a few calculations and based on the number I get, I want to find the exact match in column A, then copy all the data in columns B through D that are related. So if my calculations result in 46975, I want to automatically copy over to another worksheet the range B50-D59.
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range
Dim strFirstAddress As String
With Sheet4.UsedRange
Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues)
If Not rngFind Is Nothing Then
strFirstAddress = rngFind.Address
Do
rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0)
Set rngFind = .FindNext(rngFind)
Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress
End If ..................
I have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
Here's what we need to do:
We are compiling one master spreedsheet from many smaller ones and I need to figure out how to copy them quickly and efficiently. For example:
Small Spreadsheet:
Column B is marked as P, M, C or S. This represents the type of the account.
Column C is the name of the account.
Master Spreadsheet:
We have a column for each account type (P,M,C,S)
Can we use a formula/macro to automatically copy columns B and C from the small sheet and organize them accordingly in the Master Spreadsheet?
For example:
Small spreadsheet:
P Account Name1
M Account Name 2
M Account Name3
C Account Name4
M Account Name5
would appear in the Master Spreadsheet as:
P M C
Account Name1 Account Name2
Account Name1 Account Name3 Account Name4
Account Name1 Account Name5