I am copying from cell A2 to C2, then A8 to C8, etc. if the cell in column "A" contains the text "Item" until the end of data in column A. Here is what I am attempting:
Sub MoveItem()
sText = "Item"
sText = LCase(sText)
iMax = Cells.SpecialCells(xlCellTypeLastCell).Row
For i1 = iMax To 1 Step -1
If InStr(1, LCase(Cells(i1, 1)), sText) <> 0 Then
Cells(i1, 1).Copy Destination:=Cells(i1, 3)
End If
Next i1
End Sub
The problem is the destination location. If I define it as a Range eg: Cells(i1, 1).Copy Destination:=Range("C2") The macro works, but does not iterate the destination cell.
I am trying to copy a range of cells, based on a set of criteria that changes constantly.
In Column A, I have numerical values that are present every 10th cell. In columns B through D, I have various text data that corresponds to the number in Column A. So for example, in A50, I have the number 46975. In the range B50-D59, I have text data that goes with the number in A50.
Each day I run a few calculations and based on the number I get, I want to find the exact match in column A, then copy all the data in columns B through D that are related. So if my calculations result in 46975, I want to automatically copy over to another worksheet the range B50-D59.
which I have modified from one that I use before for sheets 1 & 3 (instead of 4&5)
But it isn't working! I have defined a dynamic range in sheet 4, which is the range I want to search (its named "search") should i be using this range in the formula somewhere?
Private Sub CommandButton1_Click()
Dim rngFind As Range Dim strFirstAddress As String
With Sheet4.UsedRange Set rngFind = . Find(ComboBox1.Text, LookIn:=xlValues) If Not rngFind Is Nothing Then strFirstAddress = rngFind.Address Do rngFind.EntireRow.Copy Sheet5.Range("A" & Sheet5.Rows.Count).End(xlUp).Offset(0, 0) Set rngFind = .FindNext(rngFind) Loop While Not rngFind Is Nothing And rngFind.Address <> strFirstAddress End If ..................
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
I am tracking total man hours of contractors in columns of different rates applicable. At present I have structured my worksheet with the different rates across and days going down. As I am invoiced for a period of work I will log the invoice ref number in a separate field. I would like to sum totals to report against $ Invoiced and $ Committed (i,e worked but not actually invoiced against yet).
Here is an example of what I am trying to achieve. The Actual showing sum mhrs * rate only for the mhrs entries with an invoice in corresponding Invoice Ref Column. The Committed producing sum of all mhrs * rate [which I am using =(SUM(D9:D37)*D7)] regardless of what is in invoice ref column.
This way I can hopefully track what we have been billed and also what we can expect to have to budget for to cover what has been worked but not billed against.
I have data like in excel, which I uploaded and I need "simple" thing, If in column G is text Australia then copy from D column each cell which has "AUS1*" + copy the same number cell from C column and copy it into cell A and B. I hope I wrote it understandable
I'm not sure why this doesn't work on the dummy data?
Problems:It doesn't recognize the September 2011 datesIt is supposed to pull dates between July and August (i.e. 2 dates) and pull everything except those dates.
The date strings have to be variable based since it can't be hard coded.
Code: Sub copyrow() Dim rc As Integer, row As Integer, i As Integer Dim mm As String, fdt As String, pdt As String, mo As String, yr As String Dim Date1 As String, Date2 As String mm = Month(Date) - 1 mo = Format(Now(), "mm") 'ex. "08" yr = Format(Now(), "yyyy") Date1 = mm & "/01/" & yr Date2 = mo & "/01/" & yr
I need to assign to variable the number of cells in axle "Y", I explain them, I have assigned to the variable "Celda" the number "4" that, celda = 4 where 4 is the number of cells where begin the information that i need to copy,at firts they were separated sheets, and the macro it was working, assigning a letter a the processed row in the column of the left, but now is a one sheet, and I need, this macro find the last cells that the contain a letter in the left and assign the number of cells to the variable "celda" dont the range for example "A33" else "33" and begin toward down, I have this
Workbooks(origen).Activate Application.ScreenUpdating = False celda = 4 'where the number 4 will be changed for the number of cells in axle "Y" in this case "33" celda2 = 4 cdestino = 1 While Workbooks(origen).Worksheets(1).Cells(celda, 2).Value <> "" dato = Cells(celda, 2).Value Select Case dato Case "Aplicación de material"............
I have a worksheet that has data in columns a through d. Acct#, Name, Usage Code, and Other Code. Acct# and Name are self explanatory, usage code is a two letter code, and other code is a field I added to use with my macro. A specific account number could be repeated many times, but it is the usage code I am needing to work with here. My acct numbers are sorted in numerical order and column d has a 1 each time a new account number appears and a 2 if it is a repeat. I am wanting to copy the account number of any account that does not have a specific usage code listed at least once. That specific code is "ta". I am wanting it to only list the account number once in column f starting at row 2. Here is my code that is not working.
Sub test()
Dim CopyNum As Integer Set CopyNum = 2 Dim Switch1 As Integer Set Switch1 = 0
I want to copy a range of data in a new sheet using a criteria. First i would like to choose a column, and second the criteria.If criteria in this column is meet , copy all rows in the range that meet that criteria in a new sheet named after the criteria .
I have been struggling to setup these two workbooks for a bit now, and I can't for the life of me figure out a formula to do what I need to do. Essentially, I have one workbook that contains a list of purchase records for my company, sortable by Date, Vendor, Price, etc. and one workbook that has a sheet for every vendor. What I need is a formula that will search column B for a vendor, Allied Waste for example, and transfer all the information within the rows for every instance that vendor is found to the new workbook.
This is basically just a way where I can input information once in one workbook, where the sheets are divided by month, and the info will automatically transfer to another workbook, where the sheets are divided by vendor.
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
6 worksheets ("Monday" ,"Tuesday" etc) 1 Worksheet (call it Main)
In the Main sheet let's say there are 3 column headings - Date, Inv No, Amount
I want to copy from the Main sheet to the appropriate day e.g if the dates in the main are13/01/10 and 14/01/10 then all the info pertaining to 13/01/10 should go to the Wednesday worksheet.
I want to copy cells A&B where there is a value in G to a new workbook. I need to loop through the workbook as there are 25 sheets in the workbook, and there 8 workbooks to go through.
There are 31 rows on each sheet, and there are only a few values in column G on each sheet.
A is customer name, B is Account No, G is Insurance premium paid, columns C to F, and H to M have other accounting data in them.
The idea is to create a global list of all customers who have already paid their insurance premiums.
Data exists in a workbook's sheet name "0293" in columns A, B, C, & D. If a row's value in column B exceeds zero, the entire row & formatting needs to be added to the bottom of data in a sheet called "Comprehensive" of the same workbook and put 0293 in column E of the same row. What would be the simplest VBA code to copy sheet 0293's data & add it to the "Comprehensive" sheet with the sheet name in column E of the same row?
I am trying to loop through a column and cut and copy cells containing one of ten or more criteria (text strings) to the next worksheet, which already exists.
The basic loop is set up, and I understand that an array for the multiple criteria is needed but am falling at this hurdle, as well as struggling with the routine to copy the row to the next available row on the next worksheet.
I have omitted to post my effort so far, as it's embarrassingly basic, but can anyone help with the code?
I have a workbook that is used to track job estimates.
What I would like to have is a macro that would search through column N on the original file and if any of the cells have "No RFE" in them - generate a new workbook with only this list that would include any data from columns C-U copied from the original file.
I've been seaching the forum, but so far have had little luck finding something that suits my needs.
I need to sum values from the same column, in different rows, but is there a way to sum each value based on the name in the first cell of the row. Since I realize I probably did not word that well, I will give an example. The data would be as follows
Bellcrank 3 Bellcrank 5 Gearbox 2 Bellcrank 6
Is there a way I could just sum the Bellcrank values? I understand that i could just use the sum function in this case, but I want the sum to automatically update if another bellcrank row is added.
Copy and paste each cell below when M is true or greater then 0 to a new worksheet called Price Summary. If cell is false or 0, do not copy. I would like the text in N to paste to the first available row in A and copy M as well to the corresponding B. I only need the values of these cells to copy and not the formulas. Been trying to get this to work for a while with no luck.
Excel 2007MN17$018$01920$021$022$023$024$025$026$027$028$029$030$031$032$033$034$0250# Vessel Pricing TESTWorksheet FormulasCellFormulaM17=IF(L17=TRUE,INDEX(_250lb12inlegs,B2),"$0")N17=IF(L17,"12 in.
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
The linking Field on the Interface tab defines what row I need to paste the data to on Module 1-7. The column headers are the same on both the interface and other tabs (“YES, NO, N/A, BLANKS, STANDARDS MET, STANDARDS NOT MET, NOT APPLICABLE”)
The tab is selected based on the row Module 1Medication Management Module 2Privacy Module 3Process Module 4Patient Safety Module 5Medical Records Module 6Infection Control Module 7Environment of Care
I’m trying to modify code written for a similar purpose with no luck. This is the code I'm trying to modify. I know I'm not on the right track yet.
We're working with a large workbook with data from A5:P20000 on sheet1.
I need to be able to pull data from sheet1 to sheet2 based on the invoice number in column A on sheet2.
Sheet2 will have different invoice numbers in column A, some of these invoices numbers are in column H on sheet1. I need excel to find these invoice numbers and copy the data from that row on sheet2 to the row with that invoice number on column2.
Example: Sheet2 A5 has invoice number 1234457 This same invoice number is located on sheet1 H3400 Need to copy to sheet2 (starting in cell B5) the following cells from sheet1 (B3400, C3400, E3400, G3400, H3400, I3400, J3400, K3400, M3400, N3400).
