Copy Same Range To X Non-Continuous Ranges
Oct 10, 2007
I want to select a range of cell relative to A2 then copy and paste that range 12 times.
See my coding below. I have been getting a Warning box titled "Microsoft Visual Basic"
(X) 400.
Sub mycopytry()
Dim check As Integer
For check = 1 To 12
Range(ActiveCell.Offset(29, 0)).Select
Selection.Copy
ActiveCell.Offset(1, 0).Select
ActiveSheet.Paste
check = check + 1
Next
End Sub
View 9 Replies
ADVERTISEMENT
Nov 7, 2006
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
View 3 Replies
View Related
Aug 11, 2006
I am trying to print non continuous ranges of data in the same worksheet using the print area - by keeping the ctrl button pressed etc... it works fine but the outcome is that the text in the pages becomes very smaller when compared to when you print page by page and fit every page to one.
View 2 Replies
View Related
Jan 18, 2008
I am trying to write an array using =sumproduct. I cannot get the second array to work. Whenever I split up the arrays they work fine separately, but not together. This is what I am putting. Any help is greatly appreciated. I am not sure if I am even using the correct formula.
=SUMPRODUCT((B37:B51="Math")+(F37:F51)+(I37:I51="Math")+(M37:M51)),[(B18:B31="Math")+(F18:F31)+(I18:I31="Math")+(M18:M31)]
So basically, I am creating a transcipt. So in column B if the subject is Math, I want column F to be added and so on and soforth. See there are more arrays, because it is broken down to grades 9, 10th, 11th, 12th. And what is being added is their credit (.5 or 1) for the class for each year.
View 9 Replies
View Related
Nov 16, 2006
what is described in the post clear "contents of rows based on cell contents in column" clear contents of rows based on cell contents in column
What is different is that for rows that I wish to leave untouched, I have in column A the text "Active". If that text is not present (""), then I need to clear contents for only certain cells in each row because others have formulas. For example, if A32 does not say "Active" I want to clear contents of cells D:32, G:32, etc while leaving the others in row 32 in tact. I need this to loop through about 400 rows. If it would make the macro easier, I can have the data in column "A" say "Inactive"/"Active" instead of blank/"Active"
View 4 Replies
View Related
Aug 12, 2008
I have an excel sheet populated with loads of values. There is a space between each set of data. I need to draw a graph for each section and i cant work out how to do it. I have attached the sheet in question. The gap between each column has "space" written on row, which is needed to prevent it being deleted. The drawing of the graphs needs to be automated as there is going to be 100's of sheets containg lots of data. The column size of each section can change so it needs to be dynamic. I have attached an example sheet
View 5 Replies
View Related
Mar 10, 2014
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
View 7 Replies
View Related
May 16, 2008
How would you turn
A | B | C | D | E | F | G
1 2 3
into
A | B | C |
1 2 3
A | B | C | D | E | F | G
1 2 3
A | B | C |
1 2 3
View 9 Replies
View Related
May 16, 2014
I am trying to Copy Cell from one sheet to another sheet starting on A7 and then going to V ? i have a formula that figures that out for me just need another formula or VBA to copy it to the new sheet. i will attach the a test of the file.
View 3 Replies
View Related
Feb 25, 2014
I have a set of data that has repeating column headers. So, on a sheet called "January" I have "Forecast" and "Actual" headers that repeat over and over underneath "Week 1", "Week 2", etc. On a different sheet (called "2014"), I'm trying to write a formula that will produce the latest or rightmost number underneath the "forecast" header. What I want is to be able to input data into the "January" sheet every week so that I have a record of progress and I want the "2014" sheet to show the latest data for every month.
View 5 Replies
View Related
Apr 19, 2009
find a continuous data range in Column A of a worksheet with a header in A1. But now I'm thinking that I asked the wrong question. Each day I have new data (a series of numbers) that are moved into column A of a spreadsheet. I never know ahead of time how many numbers will be in the data set. And I need to perform a series of calculations on the data. I need to do the following:
1. Find the range of the data set.
2. Perform a series of calculations on the data set.
3. Report the results in a new location.
If #1 is pre-defined, then #2 and #3 are very easy. However, #1 is causing problems. I can find the range as a string:
View 4 Replies
View Related
Oct 9, 2003
I'm trying to use Indirect in a formula where named range refers to multiple non adjacent cells; e.g. ever other cell {A1, A3, A5... etc}; however, when I use indirect, I recieve a #ref error. Replacing the indirect with the actual named range will make the formula work just fine, or using a named range that a continuous range works fine as well. It seems that indirect doesn't like non continuous ranges. ?
View 6 Replies
View Related
Aug 5, 2008
I am building a macro to conditionally edit cells that meet certain criteria within the current selection:
Dim FinalStr As String
If CheckBox3.Value = True Then
For Each cell In Selection
If cell.Font.ColorIndex = Range2.Font.ColorIndex Then
FinalStr = FinalStr & "," & StrConv(cell.Address, 1)
End If
Next
End If
FinalStr = Right(FinalStr, Len(FinalStr) - 1) 'To remove extra "," at the beginning
What I am getting from this macro is a string like "$I$27,$J$27,$E$28,$F$28" that I use later to edit that range, for instance
Range("$I$27,$J$27,$E$28,$F$28").ClearContents
It worked fine, however, I found later that XL cannot handle more than 20-30 individual cell addresses. The error msg I am getting is: " Method 'Range' of object '_Global' failed " Note that it won't be very practical to pick the cells and edit them within the same loop since there are several criteria times several edit options.
View 9 Replies
View Related
Sep 30, 2013
I have a big sheet and i want to create a mask where i can insert a value and in a ListBox appears all accurrences of this value and the other in the same row.
I created a listbox where, with the RowSource proprety show me LAST row where there is the value i want. Now i want a list of rows not continous in the sheet. For example i have this sheet:
A1 Jim B1 23 C1 1998
A2 Steve B2 27 C2 2010
A3 Francis B3 23 C3 1992
Now i want to search all people with 23. So i want in my ListBox appears:
A1 Jim B1 23 C1 1998
A3 Francis B3 23 C3 1992
View 4 Replies
View Related
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
View 9 Replies
View Related
Nov 26, 2012
I am searching for the best way to loop thru col A and highlite cells with a fill color of green. I then wish to copy and paste these cells to another WS.
View 5 Replies
View Related
Dec 9, 2013
In an employee attendance file I am trying to count the number of times an employee has taken 3 or more days of leave together (continuously) in a month. My attendance file looks something like this
sat
sun
mon
tue
wed
thus
fri
[Code] ..........
In the example above E001 has taken 3 continuous days leave twice so formula should return 2, for E002 & E003 the answer would be 1 each.
View 4 Replies
View Related
Apr 1, 2009
I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.
View 9 Replies
View Related
Mar 7, 2008
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
View 8 Replies
View Related
Nov 1, 2006
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
View 9 Replies
View Related
Mar 9, 2014
In sheet x the range("d2:d20") will change from time to time. I've created a button that should copy this range("d2:d20") to sheet called summary and there to the next empty column. So the variable lstcol (dim = long) is the last empty column in summary. I'm definitely not using properly the range method.
View 8 Replies
View Related
Jul 12, 2013
how to copy contagious selection
when we select like this it says the command cannot be allowed on multiple selection
View 6 Replies
View Related
Mar 1, 2012
I have filter in three columns, column F, Col J, and Col L. I need to filter the range based on my input and copy the filtered range. My input will remain same for all three filters, it should copy the filtered range based on my input and paste in sheets (4) of my workbook.
I am expecting three filtered range in sheets(4) one after another with teh header data.
View 5 Replies
View Related
Apr 27, 2007
I have a workbook with about 25 named ranges that I would like to use in a a different workbook. Is there some way to copy them, or a way to transfer them through code?
View 9 Replies
View Related
Oct 28, 2011
I am trying to write a basic VBA code to effectively remove the formulas from a workbook to reduce the size. I want to save the formulas in one hidden row above the data and have the macro select this row, copy the formulas down to the data, calculate the sheet, and then copy and paste the new calculated info and paste as values
Issues making this more difficult:
1) The number of rows of data is not constant, therefore I believe I need to make vba count the rows of data and therefore know how many rows to paste
2) The formulas are not in every column (E.g. A:C, E:R, AA:AD have formulas)
Here is a basic example:
A B C D E
1 FORMULAS (Hidden)
2
3 [Inv. Typ] [Material #] [Batch] [Qty] [$]
4 [FG] [545] [555A] [5000] [$250000]
5 [WIP] [984] [659A] [200] [$650000]
In this example I would like the macro to:
1) Copy the hidden formulas in (A1:B1, D1:E1)
2) Paste these formulas into the range (A4:B5, D4:E5) (*The height of this range is not constant)
3) Calculate the Worksheet
4) Copy and paste values to the range (A4:B5, D4:E5) (*The height of this range is not constant)
* I would like column C to be left alone.
View 4 Replies
View Related
Aug 16, 2013
I have data in column A separated by blank rows. I want to copy ranges between two blank rows, and paste it to sheet named "mega" so that each range is in its own column.This is code I'm working now.
Code:
Sub QuickSet2()
Dim rng1 As Range
On Error Resume Next
Set rng1 = Cells.SpecialCells(xlCellTypeConstants).EntireRow
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1.Copy
Sheets("mega").Range("A1").End(xlRight).Offset(0, 1).Paste
Else
MsgBox "No constants found"
End If
End Sub
View 6 Replies
View Related
Jan 15, 2010
I have 2 workbooks formatted the same way.
Using VBA, I want to search through book1 Col A which has a list of Code # s.
If a Code # is in Book 2 Col A, find a match on Book 1 Col A.
After finding a match, compare the range in Book 2 ( Which is the 4 cells immediately to the right ) to the match with the corresponding range in Book 1.
If the range contents are not the same, copy the range from Book2 to Book1 and replace the range in Book1.
If there is NO Match of the Code # in Col A, then Copy the entire row to Book1 and append it to the end of the current Book1 used range.
A MsgBox to show how many changes and additions at the end.
View 11 Replies
View Related
Aug 22, 2006
Ok What I want to do is copy the info in Cells A1:N55 into cells A63 onwards, now this I have completed so far with the following code, but what I also want to do is copy any changes that are made in cells A1:N55 from when this copy function is run into cells A63:N118.
Does anyone know of any way I could go about doing this?
Sub CopyJob()
Dim wSheet As Worksheet, strWS As String
For Each wSheet In ActiveWorkbook.Sheets
strWS = Left(wSheet.Name, 2)
Select Case strWS
Case Is = "AJ", "CJ", "PJ" .......................
View 9 Replies
View Related
Aug 27, 2006
I have this
Sub transpose_UPCID()
Application.CutCopyMode = False
Range("A7:B7").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("BAUCS").Range("C11").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
Application.CutCopyMode = True
End Sub
This macro copies a range and paste it in another worksheet. I dont now how to make this macro to copy another range at the same time and copy it to row C37.
How can I make both things at the same time? The code I am showing here copies and paste product codes. I need to select and copy the production (which is in column F) for each product code and paste it starting in C37.
View 3 Replies
View Related
Nov 18, 2006
I'm facing a problem in copying the same ranges from 23 workbooks in the same folder. My code can only work for one workbook.
Dim r As Integer
r = 0
Do
Worksheets("Allocation& Trading").Range("A8").Offset(r, 0).Value = _
Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value
r = r + 1
Loop Until Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value = ""
I'm required to use the same procedure to copy one of the 23 open workbooks in one time into the worksheets("Allocation&Trading") of another new workbook, which means after using the procedure to copy some ranges from the workbooks("July-1"), I can reuse it to copy the same ranges from the workbooks("July-2") into that same worksheets("Allocation&Trading"). So my procedure has to be flexible enough to work for 23 times for 23 different workbooks in the same folder. Anyone has any idea how to use the same procedure to work for 23 workbooks seperately? I have tried out the codes provided in the similar threads, but they can't solve my problem. Can anyone enlighten me?
View 6 Replies
View Related
