Match And Copy Of 2 List Ranges
Feb 14, 2007
we have two workbooks which do change daily. one with 'data' sheet containing 40,000+ rows of data in coloumn 'B' another with 'cust' sheet with 10,000+ rows of data in coloumn 'C' as a part of daily work we have to compare last part of the each cell in Cust sheet with data sheet
1. last 6 digits are compared and the results copied to 'cust' sheet from 'D' column and so on adjacent to the corresponding data.
2. last 5 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (1)
3. last 4 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (2)
4. any duplicate within the row to be deleted from left to right
as the data are enormous the work can be completed only 10 - 15 % manually.
View 5 Replies
ADVERTISEMENT
Jan 15, 2010
I have 2 workbooks formatted the same way.
Using VBA, I want to search through book1 Col A which has a list of Code # s.
If a Code # is in Book 2 Col A, find a match on Book 1 Col A.
After finding a match, compare the range in Book 2 ( Which is the 4 cells immediately to the right ) to the match with the corresponding range in Book 1.
If the range contents are not the same, copy the range from Book2 to Book1 and replace the range in Book1.
If there is NO Match of the Code # in Col A, then Copy the entire row to Book1 and append it to the end of the current Book1 used range.
A MsgBox to show how many changes and additions at the end.
View 11 Replies
View Related
Jan 27, 2012
I looking for a macro to look in a list in worksheet "Map_Ref", and take the Range Name of column "A" and copy that range in the corresponding Tab and range as specified in Columns "C" and "D" (i,e. take range name "BB Staff Counts_Tenured" from cell "A2" and copy that range in worksheet "Sheet2" (as specified in cell C2), range "A2" (as specified in cell D2). And so on.
List of worksheet "Map_Ref":
Column AColumn BColumn CColumn DTable/Range Title/Name:
Range in Tab "CMD_1"Copy to Tab:To Range:BB_Staff_Counts_TenuredA126..Q156Sheet2A2Branch_Counts_BBmarketsA35..
C47Sheet2A59Branch_Counts_Chase_SBRM_RegA30..E33
[Code] ........
View 6 Replies
View Related
Mar 14, 2013
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
View 9 Replies
View Related
Apr 30, 2009
I have a set of data and I need to count the match of two ranges in a matrix, example:
ColumnA | Column B
Week | Component
1 | AAA
1 | AAA
1 | CCC
1 | DDD
1 | CCC
1 | CCC
1 | AAA
1 | AAA
2 | AAA
2 | BBB
2 | BBB
2 | AAA
2 | CCC
I want a matrix like this:
Week/Component| AAA | BBB | CCC | DDD
1: 4 | 0 | 3 | 1
2: 2 | 2 | 1 | 0
3:
etc
I have 12 components and 104 weeks which means that using DCOUNT doesn't feel like an option.
I would like something like:
FOR RANGE A1:B3000 COUNTIF 1 in column A AND AAA in Column B
View 2 Replies
View Related
Feb 4, 2009
I have a whole list of numbers (e.g. 7, 23, 567) and I would like to be able to tell which range they fall within and return the category.
MinMaxCategory
1275Group A
276375Group B
376600Group C
601825Group D
8261,075Group E
Therefore 7 and 23 would be Group A, and 567 would be Group C. I can do as a long nested IF, but I'm sure there must be a better way.
View 2 Replies
View Related
Jan 22, 2010
I need a function to compare two ranges and return a match. For example
Range A: {A56, B43, C98, D44}
Range B: {A33, G89, D44, K123, OB55}
the function would return D44. Is it possible at all with functions or do I need a macro?
View 14 Replies
View Related
Apr 21, 2013
I have a table (approx 10 rows x 10 columns) that I am trying to lookup. I have to first look across the top of the table (cols 2-10) to find a name, then look down for a value (exact match) within than array and then find the corresponding value (in that position) in the 1st column. I have used 'name manager' to name these arrays (in columns, rows 2-10).
I have setup the names of the arrays with a drop down list (as per some utube videos). When I try to evaluate the match function (with the array name as a cell reference) i get #value. When I directly type in the name of the array into the match function I get a correct answer.
Should I be using other functions such as indirect, choose, etc instead?
View 9 Replies
View Related
Sep 19, 2013
I have two columns both of which lengths will vary depending on the time-frame entered by the user but will be the same as each other for each run of the code. Because of that, I'm trying to create a named range for each column and then execute an Index Match with an Offset off of it. Below is my code which results in an "Object required" error message.
Code:
Dim Ticker As Long, Tick As Range, TIK As Range, RoleDt As Long, RD As Range, endDate As Variant
Ticker = Range("F" & Rows.Count).End(xlUp).Row
RoleDt = Range("E" & Rows.Count).End(xlUp).Row
Set TIK = Range("F2:F" & Ticker)
Set RD = Range("E2:E" & RoleDt)
cell.Formula = "=INDEX(RD,MATCH,(RC[-1],TIK,0)+1)"
View 9 Replies
View Related
Apr 3, 2014
I have two files
Say first file name is X and in work sheet 1 i have used name manager for two columns say "Series" and "Fund name"
Second file name is Y
R7C3 is Fundname of Y file
RC4 is Series Value of Y file
In the row of Y file , C 15 - I want to calculate the formula
Range("C15").FormulaArray = _
"=IF(ISNA(INDEX(Series,MATCH(R7C3&RC4,Fundname&Series,0))=RC4),""NO"",""YES"")"
I am not getting any error but the result is not correct , even for the series which is not there in my file "X" it says "YES"
See my codes below :
Dim colA As Variant
Dim colB As Variant
Dim WksDash As Workbook
Dim Wksfile As Workbook
Dim wksWatch As Worksheet
Dim WksDash2 As Worksheet
Dim Classunion As Variant
[Code] .....
View 2 Replies
View Related
Dec 28, 2006
B2 contains CITYNAME
A2 contains The name of the TAB the data relates too (although i cant find anyway of using this cell within a formula to read the relevant tab, maybe you know of a way)
This is the working code i currently have in cell B3, this is what i need to enhance.
=SUM(INDEX(ABCD!$1:$65536,0,MATCH(B2,ABCD!$1:$1,)))
This looks at the tab ABCD and sums all the values it finds in the column that matches the name supplied in cell B2 on Sheet1
Tab ABCD has dates within coulmn A, and Values in Column B, first row from Column B to Column Z contains the CITYNAME (coumn Z may become longer so this needs to be able to cope with that too.
What i would like to do is add into this an extra requirement, there must be a start and end date. I still need to use the match function as B2 changes using a drop down validation (containing CITYNAMES, these represent the columns within the tab ABCD
E1 Contains the STARTDATE
H1 Contains the ENDDATE
This is the closest I get, changing the start and end date does not give the expected result...
=SUM(--(ABCD!$1:$65536>=E1),--(ABCD!$1:$65536
View 9 Replies
View Related
Sep 9, 2013
I saw a post with a formula of =LOOKUP(9.99999999999999E+307,SEARCH(" "&KeyWords&" "," "&$A1&" "),KeyWords) which I thought might work, but it returns an error.
I'm trying to search on A1 and return the correct name from a named range called KeyWords.
A
B
C
D
1
Chicago
#N/A
Chicago IAP
[Code] ......
View 4 Replies
View Related
Jul 3, 2014
I have low limits in column D and high limit in column E. In column C a letter corresponding to each limit range.
In B2 the formula should outputs the corresponding letter based of the value entered in A2. For example, if 0>=A2>=3 then the output should be"M".
The formula works fine, but if I have more conditions I'll need to use many IF() functions. Is there a better way to match the correct letter depending the value in A2?
View 2 Replies
View Related
Oct 13, 2009
I have a problem finding the correct formula for counting matches with conditions between 2 non-equal ranges in Excel. The sheet is a try at making a working schedule template a bit automated.
For Week 1 each cell in the H16:H25 has a drop-down list (originating from BD30:BD50) where a work position can be chosen. The fixed list in BD30:BD50 starts with “<<SELECT>>” which is the default choice for the cells in H16:H25, and then “HOLD” before continuing with various work position names. K16:K25 is shift number 1 on Monday, L16:25 is shift 2 on Monday, and so on until Shift number 6. Then the rest of the days of the week follow (each with 6 shifts). Monday through Sunday (with 6 shifts for each) ranges over K16:AZ25. In the cells in K16:AZ25 the following can be entered: “x” (work), “o”(off), “-“ (leave).
The issue is the formula in each of the K26:AZ26 cells which are to total each of the shift columns . I want to count all the “x” in each column, but ONLY if the positions chosen in H16:H25 matches one of the positions in the list in BD30:BD50. NOT if a cell in H16:H25 displays “<<SELECT>>” or “HOLD” (even if it has a “x” entered in one of the Shift cells).
For example: .....
View 10 Replies
View Related
Sep 8, 2009
Column A contains State names; column B contains a few cities for each of the states. Row 1 contains rank as the header row. Then the table begins in cell C2 with the rates. I have two of these (on separate sheets), one titled w dep (with dependants) and the other w-o dep (without dependants). On a third sheet I have 4 combo boxes.
1.Chooses between Dep or W-O Dep
2.Chooses Rank
3.Chooses State
4.Chooses City
Here are my questions.
•How can I filter down the cities so that if I chose Texas for example, only the cities from Texas would show up in my combo box?
•I have figured out the formula to display the results from the w dep sheet but cannot get the information from the w-o dep sheet. Here is the formula I’m using.......
View 3 Replies
View Related
Jul 13, 2009
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies
View Related
Jun 2, 2012
I am very new withe macro I recieve every day a CSV file from our supplier withe a list of the products that got updated withe new price, stock count, product ID etc.
I have my own worksheet with the product ID that we use, and I want to finde the exact match to my product ID in that CSV file and delete all other that don't match.
But i need them get deletede by rows thos product ID that dosen't match to my workbook.
I tried with this, so it could set an X in front of my match then i could filter and copy it to my workbook but it dosen't work:
Because the same product ID is sometime in 100 rows and the X come only in front of one of them.
=IF(ISNA(MATCH(Q2:Q1000;G$2:G$1000;0));"";"X")
so with some macro. I need to have every row deleted that don't match to my list of product ID.
View 5 Replies
View Related
Jan 30, 2008
I have 2 worksheets named sheet1 and need_to_delete that are in the same format: 7 digit number, 5 digit alpha numeric, text, dollar amount. I need to copy every row into sheet2 where there are no matches in the column A of the two source worksheets, and copy every row that does have a match in column A into sheet 3. I also need to keep the rows in their current order.
View 5 Replies
View Related
Jun 2, 2014
I am having a hard time getting my match functions to work with letters and numbers in the same range. I am also trying to figure out a way to have the ranges switch if there is an error. because the data is in multiple columns. It is hard to explain so I have attached a sample workbook.
ExampleFile.xlsm
View 13 Replies
View Related
Sep 26, 2011
I am trying to do index match function with criteria ranges in another worksheets. The code kept on giving me " #Value!"..
Here is the code:
Sub test1()
Dim myvalue As Variant
Dim wsname As String
Dim i As Integer
Dim j As Integer
Dim r1 As range
Dim r2 As range
Dim r3 As range
Dim r4 As range
wsname = "CustomerIDbyParts"
[Code] .......
The resulting cell of F5 kept on returning #Value!.. I suspect that my syntax for looking up the ranges from another worksheet is wrong?
View 3 Replies
View Related
Dec 6, 2006
I need to create a macro to find matches between multiple specific workbooks and a named range. I am new to macros and am very confused. After searching the forums here, I am still lost, even though they are very informative. So far,I have created a Dynamic Named Range called NamesList
=OFFSET(CurrentDay!$B$2,0,0,MATCH("*",CurrentDay!$B:$B,-1),1)
that selects the cells which I update manually each day. Once I have updated the list of names, I need to create a macro that will decide whether or not the names in the dynamic named range CurrentDay (located in workbookA) already exist in workbookB. The macro needs to create a list of the which names already exist in the workbook, and which do not. For the names that do not exist in workbookB, I then need to search workbookB and workbookC for matches, again creating a list of results. Until now I have been manually using Ctrl + F (Find Method)and going down my list of names to search through each workbook.
View 2 Replies
View Related
Mar 25, 2014
I am getting a #REF error when using an INDIRECT function within a MATCH function to check against a dynamic named range. Basically, I am trying to get the row reference so that I can go back and extract other data from the row (in a table contained in another sheet) into the current worksheet.
I attach an example file for reference. The issue arises when a Dynamic Named Range is used. In the example file, if a value from a static range is chosen, the match with indirect function works, but it fails with the dynamic range.
Dynamic Ranges INDIRECT v2.xlsb
View 3 Replies
View Related
Dec 17, 2012
I am having an issue when I try a chart a named range. The named range "Refers To" is
Code:
=OFFSET($A$1,(MATCH("Kevin",$A:$A,0)-1),,,COUNTA(INDIRECT(ADDRESS((MATCH("Kevin",$A:$A,0)-1),1,1,1)
&":"&ADDRESS((MATCH("Kevin",$A:$A,0)-1),100,1,1))))
As far as I can tell, the formula works just fine. If you look in the Name Manager and check on that Name, the highlighted box shows up exactly what it should and if you do a simple MAX test, it displays the correct MAX value from that range.
The problem comes in when I try and add it to a chart. Instead of a displaying all the values in the range, it displays nothing. Doesn't flag up any errors, just nothing.
The reason I chose to do it this way is that the table contents could change on a daily basis and so could the position of the row and I don't want to have to keep changing the references in the graph so make sure the right data is being displayed. Is it just that charts don't play well with the INDIRECT function?
View 4 Replies
View Related
Dec 25, 2008
I use the standard OFFSET-COUNT-MATCH method to create dynamic named ranges in my Excel projects. Needless to say, this method won't work on a spreadsheet with formulas extending beyond the current range. The count function counts the cells containing formulas, even though they may contain no data. Does anyone know how to construct a formula that will IGNORE the "formula only" cells??
View 3 Replies
View Related
Apr 28, 2014
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
View 6 Replies
View Related
Nov 1, 2006
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
View 9 Replies
View Related
Aug 13, 2008
peice of code which can look down a column, which contains named ranges, and output all the named ranges to a Listbox, and doesnt add the normal text also in the column?
View 9 Replies
View Related
Aug 21, 2009
I have a long list of zip codes (this is just a small portion of the list) that I need to make into ranges. Is there a formula I can use?
From this list:
90080
90081
90082
90083
90084
[Code] ......
To this:
To From
9008090084
9008690089
9009190091
9009390099
9010190103
9017490174
9018590185
9018990189
9020190202
9020990213
9022090220
View 3 Replies
View Related
Nov 1, 2013
I would like a formula to find any value from one list to match another list and return a yes or no if there is a match
My example follows In column A 4 matches 4 in column B so I would like it to return Yes in Cell A1
******** language="JavaScript" ************************************************************************>
Microsoft Excel - Book2___Running: 11.0 : OS = (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata
(W)indow (H)elp (A)boutB6=ABCD1Yes   2    315  426  534  648 Â
View 3 Replies
View Related
Mar 30, 2007
How can I add multiple cells (ranges) to a listbox, and when the user clicks one, it will activate that cell in excell. I thought about have the list box for the text, and a corresponding array that holds the actual range or address, but I cant get it working.
Long version:
I have a search feature that, when you type a name, it searches through a column and finds the name. Now if there are multiple matches to your string, I want it to add the full name to a listbox, and have the user pick one from the list to activate.
So basically, if I search for the name "john" but theres multiple people with that name ("john doe", "john smith", & "john mazz"), it would add the three to a list box, I would pick one from the list, and it would activate that cell.
I have everything done except that last part. I have it adding multiple matches to the list box, but I cant figure out an easy way to activate the correct cell when double clicking the item in the list. I could have it search again for the selected full name, but there is likely to be a case where one person is entered twice.
View 8 Replies
View Related
