I have data in column A separated by blank rows. I want to copy ranges between two blank rows, and paste it to sheet named "mega" so that each range is in its own column.This is code I'm working now.
Code:
Sub QuickSet2()
Dim rng1 As Range
On Error Resume Next
Set rng1 = Cells.SpecialCells(xlCellTypeConstants).EntireRow
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1.Copy
Sheets("mega").Range("A1").End(xlRight).Offset(0, 1).Paste
Else
MsgBox "No constants found"
End If
End Sub
I currently have the code below for a button that will unhide last 175 rows in my worksheet. I now would like to have it hide the rows that are blank in in the range (C7:BL206) looking from the bottom up. For example, if there were values in any of the cells (Columns C up to BL only) in row 190, the macro would only hide rows 191 thru 206.
Private Sub CommandButton2_Click() ActiveSheet.Unprotect Password:="" Range("A32:A206").EntireRow.Hidden = False ActiveSheet.Protect Password:="" ActiveSheet.Protect DrawingObjects:=True, Contents:=True, Scenarios:=True _ , AllowFormattingColumns:=True, _ AllowFormattingRows:=True, AllowFiltering:=True, _ AllowUsingPivotTables:=True End Sub
Once a week I get a spreadsheet with 39 separate batches of data, only across 5 columns, and each batch is separated by a blank row. The data batches are not the same 'height' in other words some may comprise just 20 rows and others as many as 550 rows - also, each week they are different to the previous week.
I've little experience with Macros, and failed dismally in trying to do the following:
1/. Delete the rows containing the first batch of data - including the 'blank' row at the foot of that batch. 2/. Save the file in it's original name after deleting the rows.
Then I perform another task with the remaining data, before repeating the steps above
It sounded simple before I started, but my recorded macro (cringe) seemed to make the assumption that every time I wanted to delete the 'top' batch of data rows, it would be the same length or number of rows as the batch I had used to 'record' the macro - in recording the macro I used shift+end+down to identify the rows I wanted removed, but the macro seemed to think I wanted to delete (say) Row 8 to Row 278 - which was true of the 'height' of the first batch of data but none after that.
Need Macro (code) to copy specific cells from a sheet into a new sheet in a desired format. I have an excel file which has data set in 20 rows. Each row has multiple fields. At the end of each data set there is a blank row. I want to capture specific data fields for each data set (e.g. Name, Bank no. etc) and put it into the respective heading. This process needs to be repeated for all the data sets.
A sample sheet is attached for better explanation. Sheet 1 has the raw data and sheet 2 has the required output. The no. of data sets shows in sheet 1 is just a sample. In actual it would be a large no. of such data sets.
I am having trouble with IF, ELSE and END IF statements. In Column H I am trying to copy over rows to sheets based on value according to ranges. I am trying to use the code below but everything seems to get copied in to the first sheet "0-500". d= worksheet name.
I currently have a spreadsheet with 4 columns that represent Surface corridinates and Bottom Hole Corridnates. Surface X, Surface Y, BH X, BH Y
We need to get the Bottom Hole XY to be directly under the Surface XY.
Attached is some sample Data and What I mocked up for a temp solution is in VBA Module2 RunAll it will complete 399 rows of data.
In Module1 I have the starting Code that I modeled off of a macro that I started to get the base code.
I just need this to loop till it has no more data to copy. and not use module2 at all.
I commented everything for my personal benifit and to help me understand the steps. also know its a monster right now but it does most of what I need it to do.
Sub CopyPasteBHXYs() 'Wrote Based on recorded macro 'Selects second data row and inserts a row above Rows("4:4").Select Selection.Insert Shift:=xlDown
'How to make it loop till the last data is reached?
End Sub
Side Note I'm finally taking a Excel VBA course Apr 8th and 9th.
I have a worksheet with macros which generates data after a number of blank rows (the number of blank rows is never the same). I want to copy the data rows to another worksheet without the beginning rows being blank. I am not sure of the best way to do this and if it can be done with a macro in the new worksheet. At the moment I do a manual copy and paste.
I have 21 (20 data sheets + 1 result sheet) excel worksheets. A5:E5 is the starting row of values. I want to copy down all the possible rows with values until the row is blank (.xlDown) and paste in Sheet21, A2 onwards.
The problem is each of these 20 sheets have different number of rows of values (say 1 has 10 rows, 2 has 23 rows etc.,). I want to copy A5:E15 in Sheet1 and paste in A2:E11 in Sheet21 and copy A5:E28 in Sheet2 and paste in A12:E35 in Sheet21 and so on.
In table 1 you will see that not all rows contain data (this is because i have removed it previously with a macro) the second table shows what i want the macro to do but without deleting rows:
A Hiddenrow with formula B C
[Code]....
So basically i would like a macro to search for the first none blank value in column A and copy the row to the first available blank row , it also needs to blank out that row once done. i.e row 3 would be moved up to row 2, 5 up to 3, 7 up to 4 etc etc.
The hidden rows contain formulas which cannot be deleted or my ws goes Pete Tongue.
What I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
What I have are invoices that span an entire month that I need to convert into a format for the billing department. The columns I have right now are: "Invoice Number"Cost CenterAccountFundType of Service" Date of Completion"Unit PriceQty Total Price
I need to generate a file with the headings as: Cost CenterFund"Date of Completion"Account Total Price. Since Total Price only appears on the rows that have the final information I need, I want to have a script that grabs every line in which the Total Price column has data, generate a file of the summary lines, then throw that through another macro to reformat it into the final format, or just do it in one step. In summary I need to grab rows where Column I is not empty, whats the best way to do this?
I have a master list of Players on one sheet B2:B72 and in E2:E72 is a column called Playing and in it is "y" or "n". I need to make a list of the Players that are Playing on another sheet without blank rows (I can do it but it leaves blank rows for the Players that have a "n" from column B. I am using 2003
Here is the formula I am using now: =IF(Players!$E3="y",Players!$B3, " ") but I get blank rows for the player that are not playing.
Can a macro make a workbook everytime you copy, it will paste special formulas only and skip blank rows? And can I still let me select the range manually? I would like to use this to link workbooks.
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY CODE TO INSERT 1 ROW Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
The last few days I have been trying to figure this out with no luck whatsoever. I am using Excel 2010 32-bit with power query on a Windows 7 64-bit computer. I was going the use the html creator, but the dl link was down and I had to use screenshots.
I have a sheet titled "LeadSheet" that contains multiple data blocks of information (around 20). I have attached 2 examples of these data blocks and 2 examples of results needed below. I tried to create them so they would fill in the gaps of my explanation.
All of these data blocks are 7 columns wide and vary in row size from 10-250. The blocks of data all have titles on the 5th row, but are not headers, and then data beginning directly underneath. I hesitate calling them ranges because I only selected one data block as a range and named it "lead1" and then stopped not knowing if I was headed the right direction.
I first tried to create a table out of the range, but was unable to do so because the "Name" column is an array. The phone and address columns are populated by VLOOKUP. And although the images show the column names as the same for name, phone and address theyare actually different, like name-firm1, name-firm17,address-firmxyz, etc, etc. I not putting that in the images. The "Option 1", "Option 2", "Option 3" and "Option 4" columns are generated using a =IF formula.
I have another sheet titled "ResultsSheet".I'm needing a way or code to copy entire rows from the multiple data blocks/ranges in the "LeadSheet", and paste it in the"ResultsSheet", based on any value occurring in any of the"Option" columns within the individual data blocks/ranges along with appending the "Option #" title to either end of the copied row.
The "LeadSheet" is constantly being updated so information is being added and taken off all the time. That being said, is there anyway to make it update as soon as the "LeadSheet" does or on a timed interval so that the"ResultsSheet" is always up to date. And also prevent it from continuing to re-copy over duplicates of information that has not changed?
Ifthe "Option #" result is the exact same percentage then the order does not matter between them.
Ifwithin the same data block/range both "Option" columns have data it is usually because of some error and is most likely bad datathat does not need to be copied. i.e. "Steven Seagal". If that makes this task much more difficult I can live with it.
If within two or more different data blocks/ranges the same name and info appears that if fine because the "Option #" will always be different. i.e. "Chuck Norris".
I am also trying to make the "ResultSheet" ordered from largest percentage to lowest, but I assume that should be done once the data is on the "ResultsSheet". No headers or titles are necessary on the "ResultsSheet"
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
Any way to cycle through two ranges and fill in blank cells. The worksheet has a "header"(A2:H2) that bascially determines how the rest of the sheet will be filled out. This header is subject to change if one of the headers is changes(see PLAN, and TRAN CODE in example).
The SRC and AMOUNT(CASH) fields will always be complete. What I'm trying to do is cycle through AMOUNT(CASH) and if the field is not blank to then cycle through crng lookig for blank cells. If the cell is blank it should copy the cell above. This is where I'm headed but it will cycle through the same crng(A3:H3) every time.
Public sub Line_Check Dim ccell As Excel.Range Dim crng As Excel.Range Dim hrng As Excel.Range Dim hcell As Excel.Range
I have workbook that has questions on column K and L that NEED to be answered. When the user closes the spreadsheet I need the macro to create a pop up that says "unfinished Workbook"
So I need a macro that tells the user to finish answering the questions on K and L -
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
I'm working on this macro that copies data on sheet1 from A2:AI2 till the last non-blank row in the same range i.e. A:AI and paste it on sheet2 in the first blank row. However, my code keeps picking up A1:AI1 from sheet1 as well and pastes it on sheet2 just before the data that I actually want to paste. Here's my code:
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name 2013 4 Sal 2013 4 Pat 2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name 2013 4 Sal 2013 4 Pat 2013 3 Pat 2013 2 Pat 2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code: Sub test() Dim j As Long, r As Range j = InputBox("type the number of rows to be insered") Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.
i have this code which inserts blank rows in alternate rows,
Code: Sub insertrow() ' insertrow Macro Application.ScreenUpdating = True Dim count As Integer Dim X As Integer For count = 1 To 20 If activecell.Value "" Then activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
Company 1 Contact 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Contact 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Contact 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1 Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2 Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
I have the following codes to delete all blank rows in column A
Dim lastrow As Long lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row MsgBox lastrow
With Sheet1 For t = 1 To lastrow If Cells(t, 1) = "" Then Rows(t).Delete End If Next t End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
