I'm facing a problem in copying the same ranges from 23 workbooks in the same folder. My code can only work for one workbook.
Dim r As Integer
r = 0
Do
Worksheets("Allocation& Trading").Range("A8").Offset(r, 0).Value = _
Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value
r = r + 1
Loop Until Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value = ""
I'm required to use the same procedure to copy one of the 23 open workbooks in one time into the worksheets("Allocation&Trading") of another new workbook, which means after using the procedure to copy some ranges from the workbooks("July-1"), I can reuse it to copy the same ranges from the workbooks("July-2") into that same worksheets("Allocation&Trading"). So my procedure has to be flexible enough to work for 23 times for 23 different workbooks in the same folder. Anyone has any idea how to use the same procedure to work for 23 workbooks seperately? I have tried out the codes provided in the similar threads, but they can't solve my problem. Can anyone enlighten me?
Using VBA, I want to search through book1 Col A which has a list of Code # s. If a Code # is in Book 2 Col A, find a match on Book 1 Col A.
After finding a match, compare the range in Book 2 ( Which is the 4 cells immediately to the right ) to the match with the corresponding range in Book 1.
If the range contents are not the same, copy the range from Book2 to Book1 and replace the range in Book1. If there is NO Match of the Code # in Col A, then Copy the entire row to Book1 and append it to the end of the current Book1 used range.
A MsgBox to show how many changes and additions at the end.
I have several ranges (i.e. c11:c22, and d11:d22, etc) in an excel spreadsheet that, when the command button is selected, will copy these values into another already established workbook ("aggregator.xls").
Thus, the command button would have to pick each of these ranges and copy them into the aggregator workbook, (i.e. c11:c22 in the first workbook would be copied into b3:b14 in the aggregator workbook; d11:d22 would be copied into b18:b29 in the aggregator workbook, etc.)
In addition, I need it set up so that when the command button is selected to copy this data, that it will look in the aggregator workbook for the next available column for the section that the data will be copied to so that it doesn't write over the previous data.
Is there anyway to simplify multiple copy and paste from one workbook to another when there are multiple and different size of data to copy. this is what i have done below. It was a bit tiedious writing it all out
I have two spreadsheets in different workbooks ( workbook 1: sheet 1 and workbook2: sheet1), here i need to compare column 5 in Book1 and Column 5 for all cells, say X is the value we are looking for..
X occurs once in book1 and might occur more than once in book2..so if a match occurs ( that is once the code checks that there is X occuring in both books in columns 5) it should copy all rows in book 2 where X occurs to a new workbook 3 in sheet 1 and also it shoud copy entire row data where X occurs in book 1 sheet 1 . But this data from book 1 has to be copied at the end of row after the data from book 2 has been copied.
if X occurs 4 times in book 2 , then 4 rows have to be copied in book 3 and then data from Book 1 where X occurs only once is copied 4 times at the end of the data from book 2.
this process has to repeated for all cells in columns 5 in book1 and column 5 in book2 .
Sub Find_Matches()
Dim M, N As Range, x As Variant, y As Variant Dim NewRange As Range
I am trying to copy and paste between workbooks that are defined in an array. However, I get an out of range error when the code first reaches the line Workbooks(Wkbk(WkbkNum)).Activate.
Sub Gather_Risks()
Dim MasterRow As Integer ' Declares row number in Master Worksheet Dim RowNum As Integer ' Declares row number in active array worksheet Dim Wkbk(13) As String
I have 25 files with certain worksheets that I need to move to 25 other files.
Worksheet 1, 2, 3 and 4 in Workbook A needs to be moved to Workbook A-2014 Worksheet 1, 2, 3 and 4 in Workbook B needs to be moved to Workbook B-2014 Worksheet 1, 2, 3 and 4 in Workbook C needs to be moved to Workbook C-2014 etc....
Is there a way to do this with a macro? Preferably I would like to do this automaticly - i.e. runing the macro from a master file that
1. Opens Workbook A copies the worksheets 2. Open Workbook A-2014 paste the sheets 3. Save and close Workbook A-2014 4. Close workbook A without saving
I have timesheets in work, where i created basic formulas to display times & worked hours etc. I also have named ranges on 4 of the sheet.
The sheets are named as the department (area 1, stock control etc.). All the sheets are identical in terms of layout, only the names of staff and hours worked are different.
When i created them, i tried to be pro-active and created flippin loads, through to October this year. Problem being i created a Summary sheet for each workbook, which in short takes all names from all areas and collates them on the last tab, puts Mon-Sun across the top, enters the hours into the relevant days, merges hours worked in different areas and also splits the hours worked over each day.
Everything is working flawlessly.
Except, the above evolution of the sheet was done after i mass created the timesheet, and as such i need to manually open each sheet, set the ranges and name them, add a summary sheet, add the macro, save and close.
Is it possible to create a macro on book1, that when i open however many other workbooks (the actual timesheets) the code would set and name the ranges for me?
The time sheets are all named according to the week -> 'W.C - 08.04.2013', 'W.C - 15.04.2013' etc.
I need to create a macro to find matches between multiple specific workbooks and a named range. I am new to macros and am very confused. After searching the forums here, I am still lost, even though they are very informative. So far,I have created a Dynamic Named Range called NamesList
that selects the cells which I update manually each day. Once I have updated the list of names, I need to create a macro that will decide whether or not the names in the dynamic named range CurrentDay (located in workbookA) already exist in workbookB. The macro needs to create a list of the which names already exist in the workbook, and which do not. For the names that do not exist in workbookB, I then need to search workbookB and workbookC for matches, again creating a list of results. Until now I have been manually using Ctrl + F (Find Method)and going down my list of names to search through each workbook.
1. I have a list of data (Collated Data) 2. For every row in collated data I want to export the cells into a corresponding cell in my predetermined workbook (TAF Form), i.e, Cell C1 on Collated data goes into Cell D3 on TAF Form, cell D1 to cell I3 etc etc 3. Once all cells in one row have been copied into the TAF Form I want that TAF Form to save as "TAF Form & Employee Name" (which would come from cell D3). 4. I then want "TAF Form & Employee Name" to close. 5. I then want the Macro to do the same thing for Row 2, copy the cells, save the form, close the form 6. I want to do this for every row that I have (which varies).
Is this possible? If you have any more questions in terms of what I need, don't hesitate to ask.
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
In sheet x the range("d2:d20") will change from time to time. I've created a button that should copy this range("d2:d20") to sheet called summary and there to the next empty column. So the variable lstcol (dim = long) is the last empty column in summary. I'm definitely not using properly the range method.
I have a master workbook that needs to be updated with information from approximately 900 other workbooks. The master workbook is layed-out with the name of each of the 900 workbooks (minus the .xls extension) located in column A. The number needed from these 900+ workbooks is consistently located in cell J20.
Is there an easy way to open each of these 900 workbooks, copy the number from cell J20 and paste the number in the correct location in the master workbook?
I'm trying to copy data from several workbooks into another - in Excel 2003. The following code works perfectly except when there is only the header row in the target workbook. Then I get the following error message, "Run time error 1004. Application defined or Object defined error". How can I get it to find A2 the first time - without coding A2 in?
Code: Sub COPYCELL()Sheets("Distribution").Select Range("B7:X84").Copy Windows("SecondWorkbook.xlsm").Activate Sheets("Distribution").Select Range("B7:X84").Paste End Sub
Basically I want to copy cells B7:X84 in the current workbook on the Distribution tab and paste them into Secondworkbook.xlsm that I have already open on the Distribution tab in the same range. There are graphs though so
I am not sure if that has an impact. When I do it manually I copy and then paste into SecondWorkbook and then I copy what I just pasted and paste special values.
I have several workbooks (around 100) that I need to grab a certain range out of (C2:C4). Contained in this range is a title and two numbers stored in row format. I need to copy this same range in every workbook, transpose the information and then insert the information in the consecutive rows.
Right now I do it manually and it takes a lot of time I want to set this up so I can import it into a ms access table at some point.
I am learning VBA so that I can do greater programming. I am trying to copy and paste a dynamic range from one book to the other. My Statements are as follows.
With Workbooks("Actual Cash Flow.xlsx.").Worksheets("909") .Range("C1:E" & .Cells(Rows.Count, "E1").End(xlDown).Row).Copy Destination:=Workbooks("Master Cash Flow.xlsm").Worksheets("Master Cash Flow").Range("K1") End With
I tried this and it worked within the same work book, but when moving to a separate workbook I am having issues, and coming up with the error "Subscript is out of Range"
I am attempting to move data between two spreadsheets and have written a macro that initially copies one cell E2 then pastes it correctly into another workbook. I now need to modify the macro to include additional ranges. E2, E3, G2, H2, N1 to U3. I am stuck to the best method of selecting these ranges and then pasting them as I cannot get it to work. I have included a copy of the code below.
Sub getdata() Dim filename, fileselected Dim a1(1 To 20) Dim WB As Workbook ChDrive ("g:") ChDir ("G:Folder name") fileselected = Application. GetOpenFilename("Excel Files, *.xls", , "Select your Files", , True) If StrComp(TypeName(fileselected), "Boolean", vbTextCompare) = 0 Then ChDrive ("g:") Exit Sub End If.......................
I have a problem with one macros. That VBA code copy every row into different sheet.
I've tried to copy every row + one row, which appears to be a title row. I failed Please someone to view that code and tell me what corrections i have to do. One more thing:
How can i Copy that sheets into different files ?
Here is the code:
Sub PrepareForPaste() Const copySize = 1 Dim repeatCount As Integer Dim startRow As Long Dim endRow As Long Dim lastRow As Long Dim LC As Integer Dim sourceSheet As String
I want to copy a perticular coloum in one xls sheet ie a.xls(sheet3) coloum to another xls ie b.xls in sheet2(coloum) of that xlsHow can i do this using a macro is their any other better way of doing this
I got 2 workbook called book1 and book2. Book1 is design to be form in the spreadsheet for the user to fill up the particular data. Book2 is the password protected workbook. I created a button in book1 such that when the user click the button, it will automatically transfer the data in book1 (worksheet1) to book2 (worksheet1) without opening up the book2 during transfer data. It simply add a record in the book2 (worksheet1). Can I write such a code to do this?
I have filter in three columns, column F, Col J, and Col L. I need to filter the range based on my input and copy the filtered range. My input will remain same for all three filters, it should copy the filtered range based on my input and paste in sheets (4) of my workbook.
I am expecting three filtered range in sheets(4) one after another with teh header data.
I have a workbook with about 25 named ranges that I would like to use in a a different workbook. Is there some way to copy them, or a way to transfer them through code?
we have a Workbook... in this workbook we want run a VBA or Macro which macro copy a specific sheets (Sheet Name "Abstract") this sheet but when we copy this sheet then in sheet name show file name where this sheet come..
for eg.
if Abstract sheet copy ABC.xls file then sheet name show in my workbook ABC
We have 205 file in the folder (folder store in E:yr 13-14) is it possible that in few files abstract sheet not found..
