Compare Two Ranges In Different Workbooks And Copy Data To A 3rd Workbook

Jul 30, 2004

I have two spreadsheets in different workbooks ( workbook 1: sheet 1 and workbook2: sheet1), here i need to compare column 5 in Book1 and Column 5 for all cells, say X is the value we are looking for..

X occurs once in book1 and might occur more than once in if a match occurs ( that is once the code checks that there is X occuring in both books in columns 5) it should copy all rows in book 2 where X occurs to a new workbook 3 in sheet 1 and also it shoud copy entire row data where X occurs in book 1 sheet 1 . But this data from book 1 has to be copied at the end of row after the data from book 2 has been copied.

if X occurs 4 times in book 2 , then 4 rows have to be copied in book 3 and then data from Book 1 where X occurs only once is copied 4 times at the end of the data from book 2.

this process has to repeated for all cells in columns 5 in book1 and column 5 in book2 .

Sub Find_Matches()

Dim M, N As Range, x As Variant, y As Variant
Dim NewRange As Range

‘ To get the book1 location

MsgBox " Selec the Location of N File"

Application.Dialogs(xlDialogOpen).Show arg1:=""


Sheets("sheetA").Select .......................

View 9 Replies


Compare Two Workbooks And Copy Unmatched Data

May 15, 2007

I have two workbooks: one is a daily workbook that will be used to keep track of work accomplished, the other is a weekly report that is generated by head office.

What I need to do each week when the head office report is generated is to match up the Project ID's (they are the constant in each workbook) from the daily workbook with the weekly one. If there are Project ID's that are new, the corresponding information would then be copied over to the daily workbook.

I am working on the copy command but I'm just not sure how to go about setting up the search to match Project ID's.

View 5 Replies View Related

Copy Data From Multiple Workbooks Into One Workbook?

Aug 13, 2014

I'm trying to set up an excel that will allow me to gather data from multiple workbooks and get it into one master worksheet. All of the worksheets are formatted the same way (See below)

Employee Last Name
Employee First Name
Employee Position
Employee Series Number
Departing City
Departing State
Attended Pilot Training?

We don't have the data yet so the idea is to paste this information into their perspective worksheets and then have them automatically populate into the master tab.

View 1 Replies View Related

Copy Data From Different Workbooks In One Master Workbook?

Dec 14, 2011

I have got a file with a lot of different workbooks

What i want to do, is open each one of them, copy a range of cells, for example E4:E15, then open the "master" workbook, look in row 4 which cell is empty and then paste the data there

i know how to copy-paste from one workbook to another, i am just not sure how to do it for more than one workbook.

View 2 Replies View Related

Macro To Copy Data From Two Workbook To Another Where All Workbooks Are Open

Jun 7, 2014

I have 3 workbooks open. 1 is my working file and I name it as "Final[date].xlsm". The other 2 files are my source files which are also open are named as source1.xlsx and source2.xlsx. Both the source files has only one tab/sheet as "Sheet1". My objective is to bring the contents of the source file to my working file in 2 different sheets. all the contents in Sheet1 of "Source1.xlsx" should be paste.values only to the "Final[date].xlsm" with a sheet name "BankDetails". This will enable the user also to replace the old data in "BankDetails" tab. The "source2.xlsx" sheet1 has a different situation. I need to copy only the cells with values, not the entire cells, because it has to be pasted (values only) to range C2:L. I have formulas in the other columns before C and after L.

Take note that my working file name is changing every based on the date while my source file has always same file name.

View 12 Replies View Related

Copy Data From Multiple Workbooks To Single Workbook In Another Location Using VBA

Jun 10, 2014

I have a folder which contains multiple 'Customer' workbooks (example attachment 'Customer_001'). Each workbook has a filename unique to the customer (Customer_001, Customer_002, Customer_117 etc). The workbooks contain a single sheet with customer information and answers to questions. These 'Customer' workbooks are automatically saved into a folder once the customer completes a Userform and clicks 'save'. Potentially, there could be 100's of customers' workbooks saved in the folder, each with their own unique filename.

I also have a 'Master' sheet saved in a different folder (example attachment 'Master'). The 'Master' workbook has multiple sheets named 'Department 1' and 'Department 2'. The purpose of the master sheet is to consolidate all information from the individual customers' workbooks.

Specifically, I would like a command button on the 'Master' workbook to execute the following tasks...

1. Copy the data from range A3:F3 from each of the 'Customer' workbooks held in the folder.
2. Paste the data into the next blank row on the 'Department 1' sheet in the 'Master' workbook.

3. Copy the data from range A7:F7 from each of the 'Customer' workbooks held in the folder.
4. Paste the data into the next blank row on the 'Department 2' sheet in the 'Master' workbook.

5. Save the 'Master' workbook.
6. Delete all 'Customer' workbooks in the folder.

View 3 Replies View Related

Copy Data From Child Workbooks And Paste In Master Workbook

May 25, 2009

I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part

But I'm Facing the problem in which i had to deal with

Validations as on both master and child sheet validation (column based combo box is activated )
one is worktype
2ns is time type

i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data

I'm attaching my macro as well as pic of that msg box with this attachment

View 6 Replies View Related

Macro Copy Data From Multiple Workbooks Into Master Workbook

Aug 4, 2012

I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following

1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status

The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.

I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.

View 2 Replies View Related

Copy Data From Different Workbooks / Worksheets And Paste In Master Workbook?

Apr 29, 2014

I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)

I am unable to write the code myself as I have never worked on VBA and am only a beginner.

Part I:

The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.

Part II:
Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.

Also some of the rows and columns are merged.

View 9 Replies View Related

Name Two Ranges On Four Tabs In Workbook Across Multiple Workbooks

Apr 12, 2013

I have timesheets in work, where i created basic formulas to display times & worked hours etc. I also have named ranges on 4 of the sheet.

The sheets are named as the department (area 1, stock control etc.). All the sheets are identical in terms of layout, only the names of staff and hours worked are different.

When i created them, i tried to be pro-active and created flippin loads, through to October this year. Problem being i created a Summary sheet for each workbook, which in short takes all names from all areas and collates them on the last tab, puts Mon-Sun across the top, enters the hours into the relevant days, merges hours worked in different areas and also splits the hours worked over each day.

Everything is working flawlessly.

Except, the above evolution of the sheet was done after i mass created the timesheet, and as such i need to manually open each sheet, set the ranges and name them, add a summary sheet, add the macro, save and close.

Is it possible to create a macro on book1, that when i open however many other workbooks (the actual timesheets) the code would set and name the ranges for me?

The time sheets are all named according to the week -> 'W.C - 08.04.2013', 'W.C - 15.04.2013' etc.

View 1 Replies View Related

Compare And Copy Details Between 2 Workbooks

Dec 17, 2009

1. To compare two workbooks with exactly the same columns- Target and Source
2. The target workbook basically has more row items than the source since this is considered the masterlist.
3. The source worksheet's names and contact details are filled out by different sources but will still maintain the same columns.
4. The records of the source workbook must be transferred to the Target workbook reference to its appropriate IDs.
5. The record of source book may be updated and will be fed to the Target book but must not copy the record that is already present in the masterlist.

Below is the code I was working at

Public Sub CopyRecord()
Dim sRng As Range
Dim tRng As Range
Dim sCell As Range
Dim tCell As Range
Dim tLR As Long
Dim sLR As Long
Dim sCount As Long

'Find last row of target sheet
tLR = ActiveSheet.UsedRange.Rows.Count

'Find last row of source sheet
sLR = ActiveSheet.UsedRange.Rows.Count..........

View 14 Replies View Related

Compare Two Workbooks And Copy Matching Row

Jul 23, 2013

I have two open workbooks, the first is called "Original Data.xls", the second "SIP.xls".The "Original Data" workbook contains a sheet called "Data" which has a list of information in the column range 'B:H', starting at row '4'.The "SIP" workbook contains a sheet called "Staff" which has a list of unique ID's in column B, starting at row 4.What I'd like to be able to do is compare the unique ID's in column 'B' of the "Data" sheet to that of the unique ID's in column B of the "Staff" sheet. NB.

There could be multiple records for the same unique ID in the "Data" sheet, but they will only occur once in the "Staff" sheet.If a match is found, I'd like to copy the row from the "Data" sheet and paste this to a sheet called "Matched", starting in B4, also contained in the "Original Data.xls" file.As each match is found I'd like to paste this into the next available line on the "Matched" sheet, and I would like, if at all possible, for the macro to continue checking for multiple entries until column 'B' in the "Data" sheet is blank.

View 4 Replies View Related

Compare & Copy Values Between 2 Workbooks

Feb 13, 2008

I have two workbooks, each with columns titled State Code & County Code. I would like to pull data from one workbook into the other workbook using conditionals. (Copy/Paste will not work as the file I am pulling into has MSA Codes in the same columns)

The data set is numeric, i.e State 1, County 13

View 3 Replies View Related

Match & Copy Ranges Across Workbooks

Jan 15, 2010

I have 2 workbooks formatted the same way.

Using VBA, I want to search through book1 Col A which has a list of Code # s.
If a Code # is in Book 2 Col A, find a match on Book 1 Col A.

After finding a match, compare the range in Book 2 ( Which is the 4 cells immediately to the right ) to the match with the corresponding range in Book 1.

If the range contents are not the same, copy the range from Book2 to Book1 and replace the range in Book1.
If there is NO Match of the Code # in Col A, then Copy the entire row to Book1 and append it to the end of the current Book1 used range.

A MsgBox to show how many changes and additions at the end.

View 11 Replies View Related

Copy Ranges From Multilple Workbooks

Nov 18, 2006

I'm facing a problem in copying the same ranges from 23 workbooks in the same folder. My code can only work for one workbook.

Dim r As Integer
r = 0
Worksheets("Allocation& Trading").Range("A8").Offset(r, 0).Value = _
Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value

r = r + 1
Loop Until Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value = ""

I'm required to use the same procedure to copy one of the 23 open workbooks in one time into the worksheets("Allocation&Trading") of another new workbook, which means after using the procedure to copy some ranges from the workbooks("July-1"), I can reuse it to copy the same ranges from the workbooks("July-2") into that same worksheets("Allocation&Trading"). So my procedure has to be flexible enough to work for 23 times for 23 different workbooks in the same folder. Anyone has any idea how to use the same procedure to work for 23 workbooks seperately? I have tried out the codes provided in the similar threads, but they can't solve my problem. Can anyone enlighten me?

View 6 Replies View Related

Copy Ranges Between Open Workbooks

May 14, 2008

I have several ranges (i.e. c11:c22, and d11:d22, etc) in an excel spreadsheet that, when the command button is selected, will copy these values into another already established workbook ("aggregator.xls").

Thus, the command button would have to pick each of these ranges and copy them into the aggregator workbook, (i.e. c11:c22 in the first workbook would be copied into b3:b14 in the aggregator workbook; d11:d22 would be copied into b18:b29 in the aggregator workbook, etc.)

In addition, I need it set up so that when the command button is selected to copy this data, that it will look in the aggregator workbook for the next available column for the section that the data will be copied to so that it doesn't write over the previous data.

View 6 Replies View Related

Compare 2 Names Ranges & Copy Difference

Aug 11, 2006

I have 2 ranges named MASTER and SUBSET and 1 range named ANSWER. I want to compare ranges MASTER and SUBSET and copy the difference to ANSWER. The ranges have the same number of columns but different number of rows. Sample data is below.

Ideally, I would like a VBA solution executed from a userform button.

aaa apple
aab banana
aac grape

aab banana

aaa apple
aac grape

View 5 Replies View Related

Copy And Paste Multiple Ranges Between Workbooks

Dec 7, 2008

I want to be able to prompt a user to select a sheet to import to another file. The ranges are as follows.

Sub Importtimesheet()...

View 9 Replies View Related

Copy Multiple Different Size Ranges Between Workbooks

Feb 27, 2008

Is there anyway to simplify multiple copy and paste from one workbook to another when there are multiple and different size of data to copy. this is what i have done below. It was a bit tiedious writing it all out


Range("E17").PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False

Range("C3: C110").Copy

Range("H17").PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ ...

View 4 Replies View Related

Compare Data With Different Workbooks

Oct 11, 2008

i had received a new project. i want to compare the data among 2 different workbooks. there are book1 and book2 which i attach at here. if there are 1 cells is different with both workbooks, then the whole row will copy and paste to a new workbook "output.xls".

i also attach the "output.xls" at here.

the background color i highlighted which data is different, just for easy to view. so can ignore the color.

View 14 Replies View Related

Compare Cell Data Between Two Workbooks

Jul 7, 2009

I am modifiying a macro I once used to compare cell data from a worksheet to a worksheet in the same workbook. But I am having trouble getting it to work bewtween two workbooks.

View 2 Replies View Related

Compare Workbooks And Extract Data

Jul 3, 2007

I have 2 workbooks containg about 600 names and the serial number of the computer they are using. One I keep so I know who has what machine. The other is created automatically by a service we subscribe to.
This workbook is loaded with errors. Machine costs being charged to the wrong people.

They both contain last name, first name and serial number. Although not in the same columns. With formulas, I have been able to take the serial number from the service.xls and find that serial number in the inventory.xls.

The ultimate goal is this:
Take serial number from service.xls and compare it to inventoryxls.
If it exist, put the first and last name of the user from inventory.xls onto the service.xls sheet.
If it does not exist, then put "does not exist"

View 9 Replies View Related

Compare Data From 3 Workbooks Against 2 Files

Feb 15, 2010

For the past several days I have been attempting to write a macro, which in theory would check the values within a one- sheet workbook (we’ll call it run_list.xls) against the values in two different workbooks (we’ll call these production.xls, development.xls). However after several days I am nowhere closer to solving this problem then I was when I started. I’ve tried different scripts and variations of vlookup, but I have been unsuccessful in tailoring what I have found to meet my needs. So I feel it is time to lie down and scream for a medic.

Here’s some background on the workbooks. The sheets in all three workbooks are set up in the same manner. Cell “A1” contains time/ date, cell “A2” contains a lot#, cells “A3:A99” contain positioning data, and cells “B3:B99” contain serial numbers associated with tubes in the specific positions. The only differences between the workbooks are the sheets in production.xls and development.xls are labeled according to their specific lot number.

What I have been trying to do is to take a value from cell "B3"in run_list.xls and find where that value occurs in column B either of workbooks. When that value was found I wanted to copy cell "A2" from its sheet and paste that value in cell "D3" of run_list.xls. I had also wanted to repeat that those steps for every cell in column B containing a serial #. If a serial number was not found I wanted it to report “Not Found”. There are also times when instead of a serial number a phrase “No Trakmate” is listed. In these cases I had intended to skip these lines.

Also, since production.xls, development.xls are updated frequently their names are also updated with new version numbers ie. Production_v10.xls I had intended to allow the user to choose what files to search in but was unable to figure out how to add a second location.

View 9 Replies View Related

Compare And Merge Data From Two Different Workbooks

Apr 4, 2007

I'm sure that there is an excel function that can do this but darned if I can figure out which one it is. This is what I would like to do: I have two different workbooks. Each workbook has one worksheet that has two columns of data. The first column is a part number and the second column is a price. The first workbook holds my master data. Starting at the first column of the first row on the second workbook I wish to compare the part number held in that cell with the part numbers held in the first column of the first workbook. If there is a match then I want to take the associated price from the second workbook and place it in a cell to the right of the corresponding part number in the first book - actually in the first open cell in the third column. I wish to do this automatically via macro, or otherwise, for all part numbers in the second workbook. The macro will also need to recognize that some part numbers in the second workbook may not appear in the first workbook in which case that part number is skipped.

The end product is my first workbook that has been transformed from two columns of data to three columns of data - one part number and two price points although not all part numbers will have the two price points. If it helps I can copy the data in the second workbook and paste it in to a second worksheet in the first workbook and do all the work in the one workbook.

View 4 Replies View Related

Compare Data In Two Workbooks And Highlight Matches

Jan 28, 2008

Here is the scenario. I am running a business and each day I download my orders for the day. The information includes customer names and addresses. The customer name is for example in column E. We will call this "Book1".

I have a second workbook that I use to store bad customer information. i.e. customers that I do not wish to sell to. The information stored here is customer name and address e.g. column A - customer name, column B - 1st line of address etc. This will be "Book2".

I wish to programmatically be able to compare customer names in column E Book1 to the customer names stored in column A Book2. Any matches found should highlight the rows (i.e. orders) in Book1.

I have tried to make this clear as possible. I want to be able to do this as a macro hence programmatically so when I click a button this comparison/highlighting takes place.

View 4 Replies View Related

Compare Data In Two Workbooks And Highlight Matches

Jan 28, 2008

I am running a business and each day I download my orders for the day. The information includes customer names and addresses. The customer name is for example in column E. We will call this "Book1". I have a second workbook that I use to store bad customer information. i.e. customers that I do not wish to sell to. The information stored here is customer name and address e.g. column A - customer name, column B - 1st line of address etc. This will be "Book2".

I wish to programatically be able to compare customer names in column E Book1 to the customer names stored in column A Book2. Any matches found should highlight the rows (i.e. orders) in Book1. I have tried to make this clear as possible. I want to be able to do this as a macro hence programtically so when I click a button this comparision/highlighting takes place.

View 2 Replies View Related

Compare Workbooks To Include Missing Data

Jul 1, 2008

I have 2 worksheets that need to be merged. More specifically, I have one 'master' XLS file with some columns included in it that are missing from a second XLS file. I need to merge the new columns (with column titles in row 5) into the second 'auxilary' sheet without touching data above row 5.

View 4 Replies View Related

Compare Data In 2 Workbooks And List Missing Data

Mar 13, 2007

I have data in 2 workbooks. Book1 - Sheet1 - Col A and Book2 - Sheet2 - Col A. I want to compare Book2 with Book1 and list all values in Book2 that do not find a match in Book1. I want to run a macro for this

View 7 Replies View Related

Formula To Compare Data On 2 Workbooks And Highlight Changes On Third Worksheet

Dec 11, 2013

I have a spreadsheet with two worksheets (sheet 1 and 2). Sheet 1 has all the current employee data on it e.g. employee number, Forename, Surname, Address, Pay rate, etc. Sheet 2 was last month's employee data in the same format. I want to compare the two worksheets on worksheet 3 and highlight any changes or just put the changes on worksheet 3 (this would be better).

The problem is employees might be on different rows on each worksheet and some employees might not be on one spreadsheet due to staff leaving and starting.

Each staff member has a unique employee number to identify them. So I need a formula that matches the employee number and then looks in the cells in sheet 1 and 2 and if different puts the value in sheet 1 into the cell in sheet 3.

View 2 Replies View Related

Compare Range In Workbook And Copy To Another

Sep 13, 2006

i have 2 workbooks attached, in the "work order masterlist 2006.xls" workbook, i'm trying to compare column F which is the R date to see if it matches the dates in the "2006 Calendar.xls". if it's the same date, i would like to copy from "work order masterlist 2006.xls", column C, which is the Client's name to "2006 Calendar.xls" under its appropriate date, assuming that:Dates of the months will not change column/row in the "2006 Calendar.xls"it will be an added bonus if i can copy and paste the description as a comment...

View 3 Replies View Related

Copyrights 2005-15, All rights reserved