As seen in the attached spreadsheet on sheet1 the template is 6 columns and 5 rows. The colors correspond to the information needed on sheet 2. this template includes data from row 3 on sheet 2. I need a macro that will copy this template and return the next row of data from sheet2. this has me stumped. Also the data changes on sheet, so it may have many rows or just a couple.
View 7 RepliesThis is the current code I am using, it works but from another post it looks like it could be cleaned up.
With Sheets("Web Data")
.Activate
Range(.Range("A6")).Offset(2, 1).Resize(2, 24).Copy
Sheets("MW Forecast Calculation").Select
Range("C9").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
This is the code I am trying to get to work but I am having trouble with the red text.
Set CopyRange = Sheets("Web Data") Range(.Range("A6")).Offset(2, 1).Resize(2, 24).Copy
Set PasteRange = Sheets("MW Forecast Calculation")
Cells ("C9:Z10")
CopyRange.Copy PasteRange.Values
I am trying to locate specific values in column a of a spreadsheet and I want to be able to move (cut and paste, offset, ???) only those values to column c of the same row. The values I am looking for are text and they all begin <@29>, <@33>, etc. (pagemaker codes). I want to move the cells with the pagemaker codes to column c. and leave the other ones in column a. Does anybody know how to do this using vba? Below is a sample of my column a.
16D
16D
16D
16D
16D
16D
16D
16D
16D
16D.........
I want to do the following:
If cells in column B from Sheet 1 contains ''text'',
Copy Cells from column D and F from Sheet 1 - TO - Sheet 2 in columns C and E -
I am writing a program which would look for look for the word " TOTAL" in sheet1 and then assign several values in sheet 2 based on cells offset of address of "TOTAL". This is repeated and down rows of sheet 2. Everything works except that it is giving repeating the first "TOTAL" address; i.e. it doesn't seem to go to the next met criterion.
Sheets("Summary").Range("A1").FormulaR1C1 = "=COUNTIF(Sheet1!C,""TOTAL"")" ....
I would like to search and copy values from one Worksheet to another.
In my case, The project number and account are listed in one worksheet called 'Source'.
In the Target sheet, The Account Column should be filled according to the Project number as per the data in source sheet.
Sample sheet : Sample.xls
I have a large worksheet that needs to be summarized. I've created a pivot table to do this and now ant the pivot to be copied into another worksheet as values so that I can add other calculations to it (to the right of the pivot). Is there a way to copy a pivot from one worksheet to another as values only? The format is not important, just the values are what matters. Final outcome will be another sheet that just summarizes a couple of numbers based on the added formulas to the pivot that was pasted as values.
View 3 Replies View RelatedThis code works great except I would like it to copy the format and values only (no formulas) to additional worksheets that are named based on a cell value. What's missing?
View 6 Replies View RelatedI found this code online to copy values only to new workbook from multiple worksheets. However, How could I manipulate this code to only copy one sheet not multiple sheets to new workbook?
Code:
Sub nowe_poprawione()
Dim Output As Workbook
Dim Current As String
[Code].....
I've managed to figure out part a certain code (or part of it) for copying an existing worksheet to a new workbook but ran into some trouble. Thus far I've adjusted it several ways, and as of now I am trying to have it open into a new workbook, but also copy and paste the data from the original workbook to the new workbook as paste special, values only, as the 1st workbook is linked to bloomberg and therefore contains live data. Below is the code I have so far. how to modify this so as to achieve what I'm trying to do. I've attached the current code I am using.
fyi :
'holdings' = original workbook
'GLV' = original worksheet
'GLVcurrent'= new workbook
'GLV' = new worksheet
When I enter values in the userform textbox and press update button i need to copy whole row of data which is next to the textbox from userform to database sheet. (Copy only if data entered in the textbox).
Basically if textbox has a value in userform row 1 and it has a value copy it to database sheet if not skip and if value is in other texbox copy other rows.
The worksheet sample attached : example.xlsm
[URL] .....
I have a perplexing problem. I created code to copy a worksheet that has the correct page setup and then copy/paste special to get just the values, not the formulas from the master sheet. It works standalone - the copied worksheet after doing the paste/special just has the data along with the master sheet's original page setup. When I include the code within a For Each... loop, it only copies the worksheet and I get the formulas. What is different between the two approaches that would cause the loop code to not do the paste/special values?
Code that works:
Application.DisplayAlerts = False
Application.CutCopyMode = False
Sheets("PerfCompDashDistrict").Activate
Sheets("PerfCompDashDistrict").Select
Sheets("PerfCompDashDistrict").Copy Before:=Sheets("Store")
[Code] ........
Code doesn't work:
For Each DistrictCell In DistrictRange
Sheets("PerfCompDashDistrict").Range("c4") = DistrictCell
Calculate
Sheets("PerfCompDashDistrict").Activate
Sheets("PerfCompDashDistrict").Select
Sheets("PerfCompDashDistrict").Copy Before:=Sheets("Store")
[Code] .....
I have a workbook that has quite a bit of data and goes through a lot of processing to arrive and a final summary worksheet. I want to take this summary worksheet and copy the values to a new workbook.
The issue is when I use the following code, it pulls the worksheet into a new workbook with the formulas (which turn to error messages since there is no longer a connection to the data source).
I could lengthen the code to create a new workbook, select the original data, copy, paste values into the new workbook, but that approach seems longer than needed. I'm sure there has got to be a way to copy just the values quickly and simply.
HTML Code:
Dim Template As Workbook
Dim SourceData As Worksheet
Set Template = ActiveWorkbook
Set SourceData = Template.Sheets("Summary")
SourceData.Copy
At this point I now have a new workbook with one worksheet full of "#N/A" and "#VALUE!". Is there a way I could do something like "SourceData.CopyValues"?
Someone created a macro for me that creates and names worksheets based off of a list on my first worksheet "Summary". I would love to be able to then have the list of titles on Summary sheet be in cell A1 on each of the worksheets that I had created.
Here is the macro for creating all of the worksheets w/ names -
[Code] .....
Code:
Sub Select_All_Sheets_And_Export()
Dim wsWorksheet As Worksheet, wbNew As Workbook
Worksheets.Select
Cells.Select
Selection.Copy
[Code] ........
I have come up with the above code to select all sheets in my workbook and convert to values and then split and save each worksheet as its worksheet name in the same directory.
I have a multi-worksheet spreadsheet in excel 2003. I want to produce a macro that will just save a copy of the front worksheet values only. That is I don't want to save any formulas or any of the hidden worksheets, just the front page report, plus it's formatting/layout.
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View 6 Replies View Relatedhow to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
I have wind speeds and elevation data for 200 points. Each variable needs to go into a calculations spreadsheet on another worksheet. Once each variable gets put in the calculations automatically spit out the result. Now I need to use macro to automate this process so that it will repeat the steps I took for every line of data.
In English code terms, I want the Macro to say, take wind speed number and input in wind speed cell in calculations spreadsheet. Then take elevation number and input in calculations spreadsheet. Then take result number from calculations spreadsheet and input in cell. Then loop to go down the 200 lines of data. Is this possoble? Sorry for the non-technical wording.
I am looking to see if is possible to copy and paste a worksheet and then remove data( only values not Text) and also not removing formatting and formulas
View 1 Replies View RelatedI want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx‎
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx‎
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.
I have a formula that uses the OFFSET function so that subsequent row adds will automatically adjust the formulas. For example, cell A1 contains the value 1 and cell A2 contains the formula:
=offset(A2,-1,0) + 1
When I insert a row above row 2, the formula above adjusts to reference cell A3, which is what I want.
What I am running into is that when the workbook is opened, something in the workbook changes, causing the "Do you want to save the changes..." popup to appear even though all I do is immediately close the workbook.
I have traced the problem to my use of the OFFSET function, as when I change the formula to
=A2-1
and repeat the scenario, the workbook closes without the "save" popup.
Does the OFFSET function cause something to change (no cell values appear to have changed) and is there a way to get around this?
I'm still getting to grips with the Find Command. Basically, I have the below code that looks at a line in a sheet(ws_Site) based on the Line ID Number that is in column A and then Finds that that LineID_Value in a different sheet(ws_main) and copies a value from column I on that line across. Problem is, if the cell I is blank it copies it across and essentially clears the cell if there was data in it.
How can I adjust the below code to only set ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value if LineID_Value is not blank?
For Each LineID In ws_Site.Range("A7:A" & SiteRows) ' Loop through all the cells in range
LineID_Value = LineID.Offset(0, 8).Value
'Dim c
With ws_main
Set c = .Range("A7:A3000").Find(LineID, LookIn:=xlValues)
'If Not c Is Nothing Then
ws_main.Range(c.Address).Offset(0, 8).Value = LineID_Value
'End If
End With
Next LineID
I have in col J a series of values, these can be negative and positive numbers of any value. In col D I have the time (starting at midnight each day) that the values occured in col J. I am trying to look down col J until a value >= 50 is reached, I then want to look across at the corresponding cell in col D to find out what time this event occured. So, if a value of 50 or more is found in cell J232 for instance, I want to look across at cell D232 and extract the time found in that cell.
View 2 Replies View RelatedIm trying to have the sum of QTY1-QTY4 show up on the next line (x, 1) even if say Qty2 doesnt have a value.
View 12 Replies View RelatedI was given a task to build a userform and all the info collected from the userform will then transfer to a worksheet named 'Promotion'. I was copying the code from last year's UserForm and with my 0 VBA background.
With the below code (I just extract part of it), the ideal case would be to transfer data to Cell A4 (which is the first blank cell on the worksheet), and when a second form is recored, it will start from A5, so on and so forth. But somehow, the code transfer the data to Cell A1001, and the columns don't match with the info either.
Private Sub cmdAddPromo_Click()
Dim RowCount As Long
Dim r As Long
Const LastRow = 2000
[Code]...
The other thing is I don't really know why there is 'Me.' before each common buttons...
I'm trying to copy a range, specified by an offset, then PasteSpecial that range to yet another location specified by an offset.
This is the code I have so far, which does not attempt to find the range to copy via an offset.
Following Dave's rule regarding using the rows in Excel rather than the columns I am trying to re organise some workbooks that have been passed to me. To copy one column of information requires 4 pages of code the first section of which is below.
Sub Copy1()
Sheets("INPUT_SHEET2").Select
Range("F4").Select
Selection.Copy
Sheets("INPUT1").Select
Range("C6").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End Sub
Now that I have the code to copy one column I want to be able to adapt it to move four columns to the right from F to J and using the example above copy from J4 to C166. I am guessing that Offset is the way to do this but can't seem to work out how. ach block of data takes up 160 rows and the data is all pasted into column C. The data to be pasted starts in row F then J then N and so on up to column IZ in some of the workbooks I am trying to revamp.