VBA - Offset Is Not Transferring Data Correctly From UserForm To Worksheet
Mar 26, 2014
I was given a task to build a userform and all the info collected from the userform will then transfer to a worksheet named 'Promotion'. I was copying the code from last year's UserForm and with my 0 VBA background.
With the below code (I just extract part of it), the ideal case would be to transfer data to Cell A4 (which is the first blank cell on the worksheet), and when a second form is recored, it will start from A5, so on and so forth. But somehow, the code transfer the data to Cell A1001, and the columns don't match with the info either.
Private Sub cmdAddPromo_Click()
Dim RowCount As Long
Dim r As Long
Const LastRow = 2000
[Code]...
The other thing is I don't really know why there is 'Me.' before each common buttons...
Code: Dim c_data As Worksheet Dim usrfrm1 As UserForm Set c_data = Workbooks(txtdbname2).Worksheets("CONTROL_1")
[Code]....
I have a userform in a workbook (part2.xls). Data from a second open workbook (defined as c_data) is tallied (countifs) and then dropped in the respective textboxes on the userform (cnthpdia, cnthfld, cnhpcrt). These textboxes have their visibility properties set to FALSE.
I need to turn them on to have the data displayed.
I am receiving a "Variable not defined." error in the line highlighted above.
I have a userform with numerous text boxes. One textbox is used to input a date with the following code
[Code] .....
When I have completed my userform I want to export this date as a date into range(a2) so I can then use the filter function to filter by month or year. THe problem I am having at the mo is that in the userform it is formatted as dd mm yy, but when I export it from userform it changes to mm,dd,yy. So if I entered 12th January 2014 it changes it to 1st December 2014.
A workaround is to export as text but then I use the filter by month year function so would prefer to avoid this.
I'm looking to transfer data (added within the fields by the user) from a userform within a peice of software, to a different userform, in a different piece of software...
I have a user form set up and the codes to transfer the data. However, when I select to transfer, the transfer happens ok but I am getting the following error message
I am writing a UserForm and only one of my comboboxes is correctly outputting to the assigned worksheet. All of the textboxes, radio buttons, and checkboxes are working properly. It is my first time designing a UserForm. Attached is the code - maybe someone can see the error that is allowing only cboq4d to be transferred to the worksheet (named DataBase).
Private Sub cmdClear_Click() Call UserForm_Initialize End Sub
Private Sub cmdOK_Click() Call UserForm_Initialize ActiveWorkbook.Sheets("DataBase").Activate Range("A1").Select Do If IsEmpty(ActiveCell) = False Then ActiveCell.Offset(1, 0).Select................
I have somewhat of a complex issue (at least i view it as one).
I have included a sample Excel Doc.
I want to be able to enter data into the spreadsheet titles LIST as i receive it. i receive invoices and checks and i keep a running tally. but i am trying to avoid re-entering the same data into the BREAKDOWN tab. but i need the data to go to the proper place in BREAKDOWN. The problem is that i have no idea how big the list will be and how many invoices i will be receiving. so i think new lines will needed to be inserted in BREAKDOWN when i add to the running total in LIST.
I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.
When I try to open an Excel-file from my employer with Excel UserForms I recieve following error messages
Code: Component not correctly registered and Code: Unexpected error (336)
I can see the code behind the UserForm, but not the UserForm. I've made the same mistake myself last time I created an UserForm, but I don't know what to do different.
I am trying to use a match function to determine which row information resides on so that I can update other information on that row but I am having problems setting up the match function.
The information is obtained from a combobox on a user form which identifies the correct address and then additional information is added to other fields on that line in the spreadsheet. PropertyListAll is a dynamic named range looking at the first column in the spreadsheet. the data starts in row 11.
My code is as follows, but I am getting error message 438. I am assuming I am referencing the workbook and named range incorrectly but I have tried various different combination all to no avail.
Code: Dim wb As Workbook Dim ws As Worksheet Set wb = ThisWorkbook Set ws = wb.Worksheets("Team Vals - Take ons") rownumber = WorksheetFunction.Match(cboProperty.Value, ws & "!PropertyListAll", 0) Sheet1.Range("tblTakeons").cells(rownumber, 2).Value = txtDate.Value
I have a workbook with 4 worksheet that store different type of data. It also has a userform that load at start of the application which is to search the data in the workbook. The userform has a combobox where the names of the sheets are stored. when the user selects say Sheet2 in the combobox, it enables the relevant textboxes on the userform and activates the worksheet at the change event. The userform has a search button that searches all the worksheets based on the text entered in a textbox.
The problem: how to search based on 1 textbox. What I want is: say for e.g the end-user selects sheet2 from the combobox, this intern enables 4 textboxes (Name, DOB, Nationality, ID #) on the userform. The end-user should have the liberty to enter data in 1 and/or any of the textboxes. The search should be performed, that if data is only in 1 of any of textboxes then give all rows that fit that criteria and display in a temp worksheet. if say the name and dob is filled by the user than what matches both should be displayed in a temp worksheet. if say dob, name and ID# given so the search button should narrow down to fit all 3 criteria and then display result in temp worksheet. As if mentioned data can be entered in either just 1 or any or all textboxes.
E.g. the worksheet is (Columns are Name, Nationality, DOB, ID#)
row 1 = name: Steven Martin, DOB: 27-may-1993, Nationality: Trinidad & Tobago, ID #: 1234567 row 2 = name: Gary Richards, DOB: 2-FEB-1993, Nationality: British, ID #: 456789 row 3 = name: David Cohen, DOB: 27-May 1993, Nationality: American, ID #: 98765 row 4 = name: Roberto McDonalds, DOB 21-Jul-1962, Nationality: British, ID # 654321 row 5= name: Gary Richards, DOB: 01-Dec-1978, Nationality: Australian, ID # 1234567
Now if the user enters only name as "Gary Richards" and search then row 2 and 5 should be displayed in a temp worksheet. if user enters name Roberto McDonald and ID# 1234567 then it should not display anything. if user enters DOB 27-may-1993 and nationality British and ID # 1234567 then as well shouldn't display anything and should a msgbox "no data found".
Any way to transfer the sheet protection from one worksheet to another worksheet via VBA.
Currently, the user selects a name from a drop down list, it unhides a workbook of the same name, copies from that workbook, and places the copied information in an area of the sheet with the drop down list. I would like the protection settings (in this case, selectivly unlocked cells to allow users to easily tab through and not make changes to data that should not be changed) to be copied with this information. Is this possible?
I have a workbook that is doing something I don't understand. In several places I am using arrays to transfer/modify information, then placing the array back onto the worksheet, and this works perfectly. The following code... doesn't.
(I've cut out unnecessary code like variable declarations - all my integer items are declared as Long)
Code: Dim varA As Variant, varB(10000, 1) As Variant Set wkDest = Sheets("a") erB = 0 For lpTerm = 1 To 4
[Code]...
and several other ways. What happens is just null output, a full column of nothing. However, when I expand my worksheet range to two columns, all the data from varB appears - it is shifted down one column and row. So my data starts at .cells(2,2) instead of .cells(1,1). The data is all perfect, I've verified it left and right.... I just can't figure out why it's getting shifted like this.
I have embedded a worksheet called Rawdata" into a userform. Is has a number of text boxes on the userform, all the text boxes copy correctly to a worksheet called Rawdata, however i cant get the spreadsheet data to copy from the Userform to the sheet called Datapad.
The worksheet in the userform is from A1:G600, this data needs to be copied back to the Datapad worksheet B2:F601.
code so far:
Private Sub cmdadd_Click() Dim iRow As Long Dim ws As Worksheet
I have used a database template from this site and changed it to suit my needs but I have a bit of a problem with some of the code. I know how to update the worksheet with the relevant userform text fields and in another project I did I have successfully sent userform text fields in the body of an email.
For this project I want to update the worksheet AND send an email at the same time. However, using the two pieces of code together is causing an error that I can't seem to solve (using my very limited vba knowledge!). The code I am working on is below and I have highlighted the line that is getting the error message. C
VB: Private Sub cmdSubmit_Click() 'Submit new record Dim ws As Worksheet, lRow As Long, Str As String [code]....
I have a Userform which has 3 'CONFIRM' buttons to pass the data from userform textbox 'ActDate1' (and 2 &3) to the worksheet 'Mod Schedule'.
In Column B from Row 7 onwards is a list of Names - one of these names will have been in the userform combobox 'SlctStu'.
I need vba such that when I click CONFIRM, on ActDate1, this value passes to:
The cell which is offset from the cell which has the matching name from combobox 'SlctStu' in the userform by the following formula:
((ModSend - 1) * 3) + 1
where ModSend is a variable set by my userform Me.Modsend.Value (a combobox).
So, for example, if the ModSend value is 3 and the name "Chuck Norris" is in the combobox 'SlctStu' in my UserForm, when I hit CONFIRM for ActDate1, I want ActDate 1 to go to the same row on sheet 'Mod Schedule' in column B from row 7 onwards where this name "Chuck Norris" also appears (a dynamic named range called 'StuModList' contains all the names that can appear here) and then offset across the worksheet by ((3 - 1) * 3) + 1 = 7 cells
I am trying to create a User Form to make data input easer for the users.
At this point, I am having trouble figuring out how to “place the data”.
My workbook has categories in which data is organized. For instance A10 might say “Toyota” and B11 would be Corolla than all of row 11 will have data supporting the Corolla.
Same for the “Dodge” category, only it starts at A60 and B61 would be something like Challenger, etc.
I have a code to place the data in the first empty row but this doesn’t work very well for me.
I will have a drop down list of all the categories in the User Form which the user will select. From this is there a way to search for that category and then find the first empty row or insert a row within that category and then the rest of the data can follow?
In the code below, all I'm trying to do is get the next record from the userform to go to the next row in the worksheet and so on. I looked through some of the threads and even tried (as underlined) but I just can't seem to get it to work.
Private Sub TEST_Click() Dim lRow As Long Dim ws As Worksheet Set ws = Worksheets("Sheet1") 'Prompt user before adding record MsgBox "Are you sure you want to Add record?", vbOKOnly, Verify
'Add data to worksheet ActiveCell. Offset(0, 0) = txtFruit.Value ActiveCell.Offset(0, 1) = txtFruit_Number.Value ActiveCell.Offset(0, 2) = txtFruit_Color.Value
I have a userform that has 1 combobox and 2 text boxes. i need the two text boxes to go to specific row and a specific column based on the entry placed in the combobox.
I can move data from a userform to a database if i am adding it to the next row, but here, there already is data and i want to add to existing data.
I tried application.match, to find the text in the combobox, but i can't seem to figure out the syntax to add it to column 13 on the same row.
I have a macro that is starting to get pretty intensive and beyond my knowledge base. Currently is takes the needed data from sheet(1) and copies it to a newly created "Sheet2" in a specific format. Once the macro is done formatting "Sheet2", it shows both userforms for the next part of this macro.
One userform (UserForm1) is for inputting barcode data into rows on "Sheet2" (this is where I am running into problems). I cannot get the userform to capture the captions to the needed cells in "Sheet2".
The other userform (UserForm2) is for a visual representation of the error check. This will check for differences in Sheet2's column data. If a row's data in Sheet2 doesn't duplicate as expected it will flag RED and an image to show in the associated frame in UseForm2.
UserForm1: Plate ID (PlateIDLabel goes to "PCR Plate ID" header column in Sheet2) Plate Location (PlateLocationLabel goes to "PCRLocation" header column in Sheet2)
Currently the userform is coded to recognize prefixes for correct input into label textboxes.
I have setup a userform to record fuel issued to vehicles. I have a text box which I would like to use to display the last meter reading from my fuel pump. This data is stored in the last cell in column F of "Sheet1" workbook. Is it possible to read this data into my userform so when it starts it displays the last pump reading?
I have two userforms (for simplicity we'll call them UserForm1 and UserForm2). When pulling up data on UserForm1 and selecting CommandButton1 is Unloads the current form and passes the ComboBox1 on the form to a public variable called lSection_Choice. When CommandButton1 on UserForm2 is selected, it uses the public variable lSection_Choice to determine the ListObject on a worksheet and then locate the last row in the first column of the listobject and input the value of the TextBox1 on UserForm2. It runs through without any errors but the worksheets do not update? I am guessing it's because the modal UserForm2 is set and not focused on the worksheet.
Here is the code to pass the public variable
Code: Private Sub AddTeam_Click() lSection_Choice = Me.ComboBox1.Value Unload Me
I have two userforms. The 1st is called “add a facility” and the second is called “Edit Facility”. The first userform works pretty well. It places all the data in the right columns in the first empty row at the end of the table. Then the “sort” procedure places the “new” facility data in the right category. Everything is good there. Here's the code.
Private Sub CmndInput_Click() Dim iRow As Long Dim ws As Worksheet Set ws = Worksheets("Facilities")
' find first empty row in database iRow = ws. Cells(Rows.Count, 2).End(xlUp).Offset(1, 0).Row
'check for a Facility If Trim(Me.TextFacility.Value) = "" Then Me.TextFacility.SetFocus MsgBox "Please enter a Facility" Exit Sub End If
I have sheet (say Sheet3) that is in essence a Database. I need to create a Userform to insert a row above the highlighted cell and insert the data on the Userform in that row.
Userform would have 3 textboxes to enter data, a submit button and a cancel button. (the 3 boxes titled Part, Price,Vendor)
In the Worksheet the 3 Columns are A C E Part Price Vendor
combobox1 is filled with values. I want the user to select one from combobox1 and combobox2 get filled in with unique values based on combobox1
Sheets Quote has 2 columns
Customer Job Stanley 1 Stanley 2 Fred 1 Stanley 3 Stanley 3 Stanley 3 Stanley 4 Fred 1
combobox1 is filled in with Stanley and Fred
based on the user selection (as an example Stanley)
I want combobox2 values to be 1,2,3,4 (having 3 listed only once)
Is there a way to modify the code below to verify that the (e) .offset(-1,0).value = combobox1
Is there a different option to use?
Code: Public Sub fill_job_num() Dim v, e On Error GoTo error1 With Sheets("Quotes").Range("B2:B50000") v = .Value End With With CreateObject("scripting.dictionary")
