I am working on a project where all columns but Column A are locked. The user selects a row of data by selecting the one unlocked cell in that row. This gives him access to modifying the contents and position of that row via a UserForm. My question is: Is there a way to copy the row of data to another sheet automatically when the user changes his selection? In this environment, a change of selection means that the user is done with one row of data and initiating work on another row. What I am trying to accomplish is a procedure invoked by the Worksheet_SelectionChange event that references the cell that has just been de-selected.
I have a copy and paste macro below, that copies the selected rows and pastes them into a different sheet called Blank BOM. Each time they are pasted, it just writes over the previous items at the top of the list. I would like it to paste in the next open row, so I can go back and forth between the sheets and add things. Here is the code:
VB: Sub CopyRow() Selection.Copy Sheets("Blank BOM").Cells(Rows.Count, 1).End(xlUp).Offset(1, 0) End Sub
I have created a toolbar that has "Previous Worksheet" and "Next Worksheet" buttons on it with the following macros assigned:
Sub NextSheet() On Error Resume Next If ActiveSheet. Name = "Problem Listing" Then MsgBox "This is the last worksheet." Else ActiveSheet.Next.Select End If End Sub
Sub PreviousSheet() On Error Resume Next If ActiveSheet.Index = 1 Then MsgBox "This is the first worksheet." Else ActiveSheet.Previous.Select End If End Sub
This seems really simple but the code crashes after 4 or 5 repeated clicks of the button.
I have a large set of data that I need to use for data validation in drop down lists. The data is arranged in 4 columns and entries within each column may repeat numerous times. The four columns are as this..
Category Subcategory 1 Subcategory2 Subcategory3
The first data validation will come from the first column. Once this is chosen the second drop down should populate with the subcategory that correspond to that category stored in column 2. once that is chosen the thrid data validation should populate with the corresponding subcategory from column three etc.. This is a small sample of the data in the columns.
I have attached a portion of an excel file I am using at the moment. What I require is a piece of VBA code which will allow me to copy selected data based on a combo box selection. What needs to happen is this :-
If the selection in the "Index" worksheet combo box related to "Month" in cell G19 is for instance "December", I would like the macro to compare this cell value to the cell values in cells C96, C124, C152, C180, C209, C236, C263 and C290 in the "Tech Services" worksheet and where the values match.......copy the commentary (Range C126:Z147 in December's case) to the range C34:Z55.
This is just a sample worksheet. I have got a worksheet with having 3 coloumns A, B & C. Column A contains E Code, while Column B is of time which user will enter. Column C contains the time in Hours. I have entered one record for example. Now, whenever user enters the value in B3, then formula from C2 should be copied to C3 i.e it should be =B3/60.
I want this to be done using VBA. Pls help me out. I want to use this feature in one of my another files which requries this feature.
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
I have a customer data base going across each row about payments/address/DOB etc. When i go to alter some information in certain cells the rows become uneven and the information for customer B1 will be for C1 instead. I'm not familiar with excel but what i did notice when scrolling down i saw an outline of uneven rows.
I have designed a simple user form to populate a finding tracker spreadsheet. Updating the tracker works fine.
Although I only need to update certain textboxes in the user form, I find myself having to enter the same data in every textbox so that the next row of the spreadsheet is filled. In all cases, if a textbox is not updated for the next row, then the data should copy the data from the previous row.
For example, last data Transferred from the user form are as follows:
[Heading] Col A - Col B - Col C [Row 1] Apple - Red - 10
Assuming I would only update the textbox for Col C in the user form, the next row in my spreadsheet would look like this:
[Heading] Col A - Col B - Col C [Row 1} Apple - Red - 10 [Row 2] (empty) - (empty) - 20
As such, I would like to add a code that allows the data (Apple and Red in Col A and Col B) from the previous row to be copied automatically and only updates Col C with the new value 20.
Oh, I should add that I have mostly Textbox values (about 20 columns) in the spreadsheet with the exception of three columns with CheckBox values although I can always repeat the checkbox fields.
I'm trying to copy certain cells to a new worksheet that keeps a track of previous entries via date and name and location.
The code works somewhat, however the values are not pasted into the respective worksheet. I'll try to explain the code as I see it.
Sub Button2_Click()
So the first section Activates the sheet that data is entered Sheets("Checks").Select Sheets("Checks").Activate ActiveSheet.Unprotect ("fizix")
If the value ST is found in the sheet, the code knows to paste values to another worksheet known as ST_Hist
[Code] ........
Here I have another macro that then deletes the data in the selected ranges denoted by "" or ":", this part of the code works, however I dont have my pasted values in the appropriate sheet!!
see attached file. Need to find latest non blank value - in attached file it is highlighted in yellow. From there, want to summarise 26 weeks back so, in the attached file:
Row 2 would be finding 750 and summarised back 26 weeks from 30 sep 2012 Row 3 would be finding 2250 and summarised back 26 weeks from 2 dec 2012 Row 4 would be finding 5000 and summarised back 26 weeks from 4 nov 2012
I have a VBA module that performs several things when a command button is clicked. One of the last things it does is paste values, so when the module is comeplete the pasted area is still copied to the clipboard; in other words, it is outlined in pulsating dashes. What can i add to the end of the code to un-copy this selection?
I have a worksheet that sometimes needs to be edited. In order for me to copy and paste I have to "comment block" the Workbook change and the Worksheet change event macros. Make my copy and paste then I have to "Uncomment block". I do this manually. Is there a way to create a macro to do this? Or is there an easy way to do what I am trying to accomplish.
How can I sort a 7 column selection and then paste columns 1-4, and 7 to the new location? Columns 5 and 6 should be ignored for the most part. Also, how can I obtain the first values of the column 5 and 6 selection to? I want to use them to name a file. This is how I am selecting the range.
Dim rng As Range 'Copy Selection Set rng = Selection rng.Copy Destination:=Range("A8")
This is how I name my files. I am getting the values from the form.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
If I select a group of non-contiguous cells with control shift is there any way that I can shift the same selection over to the next column. For example, I have A4 and A8 selected. When I press shift and right arrow it doesn't work.
The list is generated from a table, which is hidden, like so:
Column 1 - Column 2 A - Text1 B - Text2 C - Text3
Now I want to have a very simple function that will allow me to COPY the text from Column 2 based on the selection from the drop-down list. For example, when the user selects "B" from the drop-down list, I want the text "Text2" to be copied to a specific cell.
I have is two spreadsheets with different data on them, but the only connector is the user ID, so I want the cell I select with the user ID to be copied it then switches to the other spreadsheet and finds the copied selection, it then takes the columns on the selection of A to J and pastes them back in the other columns in the other spreadsheet.
My only real problem is that I can't get it to use the selection.copy in the find to select the cells I need, any help would be great, thanks.
Code ( i put spaces bewteen the other parts and find function so you could easily see it):
I have autofiltered a selection of data then issued the copy command in the code below so as to copy the visible area. In attempting to paste the data in the first blank row the program fails on the last code statement, "ActiveSheet.Paste".
The error is 1004.
An alternative suggested in the error message is to select an area the same shape and size as that being copied to paste into. Given that the copied data will change on each run how might I do this, and is this a valid alternative?
Selection.AutoFilter Selection.AutoFilter Field:=7, Criteria1:="=TC", Operator:=xlAnd Selection.AutoFilter Field:=2, Criteria1:=">=7330", Operator:=xlAnd Selection.SpecialCells(xlCellTypeVisible).Select Selection.Copy Range("A" & LR + 1).Select ActiveSheet.Paste NB. most of the code has been generated by the Macro recorder.
I have a spreadsheet named PRODUCTS and in row A there are a bunch of product codes. I would like for the user to be able to use the CTRL and mouse to select all the products that they want and then once they push that button I would like it to paste the user selected cells into a sheet called Quote starting at A7.
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
I'm trying to copy data from one excel sheet to another excel sheet. However, the data to be copied is dependent on the 'client name'.
To explain this further, in the first list I have a detailed report on our clients and the services provided to every employee of that company/client.
However, the sheet two only needs the names of the employees that belong to a specific client.
This can be done manually by setting a fliter on the name of the client/company, but I need to be automated. To ensure only that specific company/client company's employee name is copied.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab. 2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up). 3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C). 4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case). 5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
I want to select a range of cells (not together I.e. b2, c3,c4,g7 etc) and copy them to another sheet but I need to check which cell has been selected as I am using a check box to set a cell as true or false if ticked or not, so if ticked a certain cell will be added to the selection set to be copied.
I'm looking at [URL] which gives a lot of keyboard shortcuts, but not specifically what I'm looking for.
It's a basic function, I'm surprised it's not listed. I just want to copy the value of a selected cell via keyboard shortcut (for copy and paste purposes). I don't want the formula, just the value. If it were just text I would typically do CTRL-C and CTRL-V to paste like everyone does 1000 times a day, but in this case it's copying between two otherwise totally unrelated spreadsheets, so having the formula is irrelevant and produces undesired results. I just need the value of the formula.
I'm new to excel and VBA and I'm having problems with a copy paste macro that I’m using to transfer information from Sheet1 to sheet 3. The macro must:
On the click of a command button copy information from A5 to M5 and A6 to M6 and paste it to the next 2 free rows on sheet3 between columns A and M.
After the copy/paste the macro must clear the information from the input sheet - A5:M5 and A6:M6 - but retain the formatting.Thank You.
