I need a macro that copies a range (example A1... B50) from a excel worksheet to a text file.(txt without the comma) and save the text file with a different name without leaving the excel.
Part of the range had row hidden. Need to save the visible cell only.
Every time i do a filter and copy a data. Keep the filter on and past in another column. The data does not copy just into the visible cells. It pretend the filter is not there.
I have tried selecting only vible cells when copying and pasting into cells by selecting only visible cells but does not seem to work. Get the error message "command cannot be used on multiple section". There must be a solution but looked on the web and really cannot find one.
Table below so i filter out the "a" so i just have numbers then want to past into vible cells.
CopyPaste ResultsResults wanted
111
a2
232
a4
33
a
44
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
I'm filtering some data and would like to copy the visible cells. When using the code below, it copies all but four rows...is there a row maximum limit it can copy?
Rows("31:31").Select
Selection.AutoFilter
Selection.AutoFilter Field:=14, Criteria1:="FALSE"
.Offset(1).SpecialCells(xlCellTypeVisible).EntireRow.Copy
i created macro that copies and pastes only visible cells but from specific cell, i.e.
Sheets("NewRpt").Select
Range("$A$5:$FA$10000").AutoFilter Field:=2, Criteria1:= _
"Functional"
Sheets("NewRpt").Select
Range("$A$5:$FA$10000").AutoFilter Field:=83, Operator:= _
[Code]....
So that range C2341:C3437 is going to differ every motnh - how do i set it to just look from C6 below for those filtered cells?
Using Excel 2003 SP3. Trying to copy Visible Cells only from a block of sub-totalled cells. No problem pasting them to a sheet in the same workbook but when I try to paste them to another workbook the intermediate cells are pasted too! Intriquingly, after selecting VC only and copying when I expanded the sub-total block only the previously visible cells were blued out and had the 'marching ants' around them but the intermediate cells must have been copied as well - why? Question is how can I copy VC only into another workbook?
View 9 Replies View RelatedLearn about the "copy only visible cells" when I've filtered down a filter. Now Excel copies that way by default everytime I copy multiple rows when I've filtered. But NOW I want to copy everything that is hidden between the filter as well, i.e. how it did it before.
How can I tell Excel to do that?
I have data in one column that is the result of a formula, ie: =B2*B3. The result may display a decimal answer that goes out 4 places. My boss likes us to clean this up by using the = ROUND(B4,2). That is fine and easy enough, but the problem is that these numbers maybe spaced throughout a large sheet. I have to filter to make sure similar items are calculated the same way. The problem is that when I copy and paste, it copies and pastes all the data hidden between the displayed cells of the filtered sheet. How do I make it so I am only copying and pasting the data displayed and not the cells that are filtered out in between?
View 9 Replies View RelatedHave a slightly unique issue that I can't seem to find the specific solution for. I am wanting to filter a range, using row 1, then copy the visible cells (Excluding the title row 1) and paste into the same location, so over the data as Values.
I can do the filtering part and the selection of the visible row. Only trouble is pasting it to the same location.
this is the code so far - anything better would be great
Sub Macro2()
Sheets("GF_Scoring Database").Activate
Dim extvalue As String
Dim rng As Range
[Code]....
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
I need some code that copies from one sheet into another sheet... I am thinking to have a middle sheet with all the code pulling the data from "infosheet" into another sheet "vendorsheet". I'm just wondering if this is the right way to approach this issue.. because the vendor is going to want to use the sheet and we want to automate this operation.
This is what I have so far... but this is on the actual file that we are working with so I want it to be from a middle file. It creates a new file but it doesn't save it also... I'm not sure whats wrong here so any help is greatly appreciated!
Private Sub Workbook_Open()
Copy
End Sub
Sub Copy()
'
Application.CutCopyMode = False
Sheets("infosheet").Select
Range("A1").Select
Range("A1:G50").Select
Sheets("infosheet").Select
Sheets("infosheet").Copy
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Selection.Copy
SaveAs1
End Sub
I have a workbook that contains worksheets. They are listed as follows:
Sheet 1ABCDEFG
In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.
For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed
Blue
Purple
Black
White
Yellow
Orange
Green
Gray
Brown
One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time
I have a sheet which I would like to back up online every time it is saved.
I have a sub, OnlineFile(), which I have used many times without any problems, which creates a .BAT file to use ftp to upload files onto our server. As arguments, it takes the local file path that you want to upload (or download to), the name of the file as you would like it stored, the online file path, and whether you want to upload the file onto the server, or download it off the server.
It should be very easy to combine the two: what I tried was:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, cancel As Boolean)
ThisWorkbook.SaveCopyAs ThisWorkbook.Path & "" & "Rubbish.xls"
Call OnlineFile(ThisWorkbook.Path & "" & "Rubbish.xls", "Rubbish.xls", "wwwrootexcelfilesMasters", "Upload")
Kill ThisWorkbook.Path & "" & "Rubbish.xls"
End Sub
Every time I ran this, the file got uploaded correctly, but Excel had a series of problems. Often the code ran fine the first time it was run, but crashed the second time round.
After a fair bit of troubleshooting, I found that the problem came about when the file was trying to save itself - i.e. after the end of the sub. If you pause any macros from running, it still saved fine, but when the code ran, it found errors, froze or closed excel.
My thought at this point was that the code was fragmented or something. I made a new sheet, and retyped just the relevant bits of code (i.e. the BeforeSave sub, the OnlineFile sub and created the form called by OnlineFile). The problem persisted.
I've come up with a workaround for this now (which uses the same OnlineFile sub & form, and works fine), but it's driving me crazy - why does this cause excel to die? Particularly on the second time through? The code seems far too simple to cause such problems - is there a bug in Excel perhaps (I'm using Excel 2000 on Windows XP).
I have a spreadsheet that has hidden rows, I want to somehow either delete the unvisible rows or to be able to copy the visible rows to another sheet?
View 6 Replies View RelatedI want to sum filtered data from one column V and paste value into TextBox1 Goal for this code is that sum will be displayed into textbox automatically. Also i select data as last row Column "I"
Private Sub TextBox1_Enter()
Dim LR As Long LR = Range("I" & Rows.Count).End(xlUp).RowTextBox1.Value = Sum(Range("V2:V" & LR).SpecialCells(xlCellTypeVisible)).ValueEnd Sub
I have a macro which autofilters a range of cells.
I can count the number of visible rows by using the following code
Code:
lcountActive = Range("BC34:BC" & x).SpecialCells(xlCellTypeVisible).Count
What I would like to do is both calculate the Average value of the visible cells and the Sum as well. I have tried to adapt the code I have but my knowledge is just not good enough to do this.
I have a user form where people fill in data into text boxes. some text boxes remain hidden if the user does not need to fill in the requested field. but when the command button is submitted all text boxes hidden or otherwise are copied to clip board.
VBA in order for only visible text boxes to be copied to clip board. I was thinking of some sort of if statement around the vba to copy to clipboard but nothing i use works.
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
I have on sheet 1 a table 12 columns, variable rows. I filter this table on two different columns, so that only x rows are visible.
My aim is to move these visible rows to another sheet 2, starting from cell J23., work with these data in other cells of sheet 2, and send them back to sheet 1, adding the date in column 12.
Do I need, sheet viewcode or module ?
Afterwords I would like to link this VBA code to a form button.
I have an Excel sheet with all client information...For clinical supervision I want my team members to open their own "Supervision.xls" and click a button...this button will open "Client.xls" and select "Client info sheet"...It will then hide rows c,d,g & f...it will then filter column "e" based on the specific caseworkers name ( say "Joe") and copy only the visable columns back to their "supervision.xls" Values only (doesn't effect the colour formating of Supervision.xls) then close "Client.xls"
Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.
View 3 Replies View RelatedI have a table of data with a filter on the top and a sum total at the bottom. Whenever i filter the list the total at the bottom doesnt change. how do i change it so the sum only calculates the visible cells?
View 3 Replies View RelatedI have a large spreadsheet that I am using multiple drop downs in to sort for
different scenarios. I do not want to use the general data subtotal command
but each time I sort I want to get a total for the visible cells -
I have finished a huge project. The final step is sending emails.
I have a filtered range. The email .HTMLBody is formed using the visiblecells, and forms an object called 'rng'
Only problem is - now I want to add my attachments. Within the visible range, the URL of the attachment is available (column 5).
So need a loop to do for each cel in rng.Column(5)
.Attachments.Add rng.Cells(cel.row?,5)
Can't get the row number of the visible cell to work. Once this is solved I can click the button and let the beast send out 1000+ emails. But at the moment cannot Was also thinking instead of For each cel, could use i = 1 to (last row in visible rng) ?
I have a need to sum only the visible cells in a row. Certain columns are collapsed depending on the month and there is a YTD colum that I only want to pick up the expanded or visible cells. I found a custom function listed below at Microsoft's website but it only allows for a single range to be entered and I need to pick 12 individual cells, for example A1, C1, E1, etc. There is other information in the cells between and that is why the range won't work. Is there a better way to do this or can this function be modified to allow me to do this?
Function Sum_Visible_Cells(Cells_To_Sum As Object)
Application.Volatile
For Each cell In Cells_To_Sum
If cell.Rows.Hidden = False Then
If cell.Columns.Hidden = False Then
total = total + cell.Value
End If
End If
Next
Sum_Visible_Cells = total
End Function
I have a data in which I have inserted a table with headers.
I then filter the type of data I want removed from the table using the drop down
Then goto special, visible cells only, press delete.
Now, the data is gone, but when I select all again to pull up the entire table, the data is gone, but rows are still there. So now I have tons of empty rows in between the rows of needed data. Any way of removing the rows in between as well as the data?
I have a spreadsheet that has many rows of data. I've filtered the spreadsheet, and want to paste a formula so that it appears only in the filtered rows. How can i do that?
View 1 Replies View RelatedI've setup a worksheet whereby rows can be Autofiltered between a start and finish date via a Userform which (after much mucking about with UK/US dates) seems to be working nicely now. With the results of the Autofilter, i wish to count certain entries (in this case entries that are in column F) in the remaining visible rows.
The Workbook is about 'Cases' worked, and column F relates to how the 'Case' is cleared (Call, Letter, Referral). Effectively I want to be able to count 'Call', 'Letter' and 'Referral' entries once the Autofilter has been applied.
I had a situation in which i need to number the cells which start with the Text "SB" in column B. To elaborate,i want to give a serial number for all the transactions starting with "SB". For this i filtered the data >> Custom>>Begins with>>"SB"(Quotes Ommitted). I want to increment the cells with the serial numbers 1,2,3 and so on only those which contain SB. I tried using it with the ROW Function.
View 5 Replies View RelatedI am looking for a COUNTIFS that is only looking only at the visible cells. I have found a few threads on this subject but none for this specific problem.I know there is a SUMPRODUCT / SUBTOTAL excel solution for COUNTIFSing visible cells only. How modify it to take multiple ranges and criteria like CONUTIFS does.
[Code].....