I have a dictionary for which’s words I want to find poem verse pairs as references. I want to add 3 different verse pairs of poems as reference to each word from my wordlist. There are two worksheets: .......
View 9 Replies1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies View RelatedI have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedBasically a VBA code for a Command Button which when being pushed looks for the last cell being used in column A and copy/pastes rows 1 to 19 right in the next cell where this X (just an example..X could be anything basically) would be found. My columns go up to BU.
I am trying to copy and paste Row by cell value. It is working fine when I am copying row from one worksheet by comboBox value to other worksheet. But problem is after updating data when I want copy back by cell value, it is showing "Run-time error '1004'" - Application-defined or Object-defined error. the code below is working fine
Private Sub CommandButton1_Click()
Dim sfind As String
Dim cl As Range
'check for a value & show message
Sheet = "Data"
Sheets(Sheet).Select
Application. ScreenUpdating = False
If Me.userIDCombo.Value = "" Then 'the textbox in userform
Me.userIDCombo.SetFocus
MsgBox "Please enter a Name to Update."
' show message if no Name Selected
Exit Sub
Else
sfind = Me.userIDCombo.Value.........................
I have an example spreadsheet attached which contains 5 sheets. The 1st sheet ("raw data")contains the master data and the other sheets (which are blank at the minute) are the destination sheets.
I'm after a macro that will iterate throught the "raw data" sheet and when it finds the first cell in column B that starts with 'POPRS' it copies and pastes this and the remainder of the row (through to 'H') into the new sheet 'POPRS' and continue to do this for all instances where column B cells start with 'POPRS'. Likewise with the rest of the Grades in this 'Raw Data' sheet.ie Instances of PORAW,PORTP,POPRS etc. Column 'A' must be pasted also
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
a VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
6 worksheets ("Monday" ,"Tuesday" etc)
1 Worksheet (call it Main)
In the Main sheet let's say there are 3 column headings - Date, Inv No, Amount
I want to copy from the Main sheet to the appropriate day e.g if the dates in the main are13/01/10 and 14/01/10 then all the info pertaining to 13/01/10 should go to the Wednesday worksheet.
I need to be able to search column y and rows 5-100 and where cells contain "A" copy and paste entire row to row 110. I am guessing it is really simple but I am obviuosly missing something
View 3 Replies View RelatedI'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedSheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I am very new to Macro programming. I want to set up a macro which will copy data from few cells in a sheet and paste them as "Values" to certain specific locations in another sheet based on criteria. This copy paste needs to be done for about 40 different cells. I want to fix this with a button on the source sheet, so that this process happens when the button is clicked. I am attaching a sample file showing what I need.
View 2 Replies View RelatedI have 2 ranges: 1."Task info" (4x4 range)
2." Dates" (24x2 range)
I have one variable cell ref: "Date1" (a date)
Based on "Date1" I want to copy the value in the "task info" and Paste special value that is next to the corresponding date in "dates".
How to create macros. I need to copy a certain group of cells from one sheet to another, and then do it for x number of times. I'm just using the record function and now i'm lost. Here is the code i currently have:
Sheets("Mapping QTR2").Select
Range("B137:D230").Select
Selection.Copy
Sheets("ExpDB_Q1").Select
[Code] ....
Also, column C is blank. i would like to get the values from another list in the same workbook, say "branch list". I would like to populate Column C with one specific branch for each "batch", if that makes any sense...
I have a sheet named "Fittings Summary" with an export button. I need some code that will copy range A1:G38 of the fitting summary sheet then open a dialogue box asking for the following "Please Enter Tag No" once a tag number is entered I would like a new sheet to be created in the same workbook named with the tag no entered previously then the copied cells pasted into it. I would like to keep the formatting of the cells but not the formulas within.
View 10 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View Relatedi want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies View RelatedI have set up a workbook with sheets named for each month.
I have 70+ separate excel files (one for each month) that each have a single sheet I want to copy into the new workbook's corresponding month sheet.
Each file is named different but the name of the sheet in those files that I need will all be the same.
Is there a way I could sit in the sheet I want it pasted to, run a macro that I can point to the correct file/workbook -- preferably without opening -- and then have it copy the contents of the sheet I want (again, will always have the same sheet name).
I want the sheet copied with formatting and all, an exact copy.
This link seemed useful - if i could control which sheet it copies more easily since for me the source data always has a different file name. [URL] ........
I thought I lost that original message so I rewrote everything - differently - then I saw the restore button so I'm leaving both phrasings.
I would like to know if there is a Macro that could ask me which workbook to copy from, select the sheet in that workbook called CAP (sheet will always have the same name but I need to copy the sheet from 70 different files/workbooks) copy the whole sheet with formatting and all, and then paste it in my active sheet on the new workbook I am in.
I want to take data about a particular partner we have (CAP) out of the monthly summaries for the last ~72 months (which each have their own file/workbook) and put them all in one workbook just for this partner, on each sheet by month still.
I am only interested in automating everything I have to do for 1 month, but in a way that would easily let me do it again for the next month, and the next and the next, 70 times.
But a Macro would still be easier than opening each file, going to the sheet I want, copying everything, going back to my new workbook, pasting everything, closing the extra workbook, then doing that ALL again 70 times.
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
[Code].....
So the problem is this line:
[Code] .....
I have attempted to replace this line with:
[Code] .....
But there is something wrong as the code keeps breaking on that line!
Is there a vba codes to copy all data from sheet 1 to 5 in workbook to sheet 6 same workbook? and paste it as value.
View 5 Replies View Related