Paste Rows Into New Sheet When Criteria Met
Jan 21, 2008
I have an example spreadsheet attached which contains 5 sheets. The 1st sheet ("raw data")contains the master data and the other sheets (which are blank at the minute) are the destination sheets.
I'm after a macro that will iterate throught the "raw data" sheet and when it finds the first cell in column B that starts with 'POPRS' it copies and pastes this and the remainder of the row (through to 'H') into the new sheet 'POPRS' and continue to do this for all instances where column B cells start with 'POPRS'. Likewise with the rest of the Grades in this 'Raw Data' sheet.ie Instances of PORAW,PORTP,POPRS etc. Column 'A' must be pasted also
View 4 Replies
ADVERTISEMENT
Jun 19, 2008
1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
View 4 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Apr 15, 2008
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
View 6 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Dec 10, 2009
I have a dictionary for which’s words I want to find poem verse pairs as references. I want to add 3 different verse pairs of poems as reference to each word from my wordlist. There are two worksheets: .......
View 9 Replies
View Related
Jul 25, 2014
I have 2 worksheets, one called "Consolidated" and one called "Converted".
I have a spreadsheet where I press the update button and a macro runs that searches for the word "Converted" in column E on the Consolidated spreadsheet (the original). When it finds it, the entire row will be cut and pasted onto the "Converted" worksheet.
I have managed to do this with my current code. However when you press the update button again, all the newly pasted rows on the Converted worksheet are deleted. (I would like when i press the update button it to NOT affect the Converted worksheet, just add any new data found on the Consolidated sheet to the Converted sheet.) I assume this is because my current code her below is NOT telling the spreadsheet to paste to the NEXT AVAILABLE EMPTY ROW. Current code:
[Code].....
So the problem is this line:
[Code] .....
I have attempted to replace this line with:
[Code] .....
But there is something wrong as the code keeps breaking on that line!
View 5 Replies
View Related
Nov 21, 2011
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
View 2 Replies
View Related
Sep 15, 2006
I am pulling from odbc into an excel sheet
Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need.
Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
View 9 Replies
View Related
Oct 27, 2013
I need to write a macro where i need to copy set of rows from few columns of an excel sheet to another set of columns in same sheet . My excel looks something like this...
Product
F1020
F1023
F1025
F1120
F1123
F1125
[code].....
Now when i filter this table for Product PR01 only rows 1,3,4 will be visible while the other rows remains hidden
I WANT TO COPY ROWS COMING UNDER COLUMNS
F1120
F1123
F1125
TO
F1020
F1023
F1025
when i use the code
Selection.SpecialCells(xlCellTypeVisible).Copy
i get to select ones those are visible but i am not sure how i can PASTE them to rows visible under column f1020 to f1025
Tried this in a frantic effort
Selection.SpecialCells(xlCellTypeVisible).PasteSpecial xlValues
But got an error for " multiple selection"
View 1 Replies
View Related
May 4, 2009
I have some data from A1 to A65536, there are few blank rows in between. i want to delete all the rows below the word "test" in that range. that is the word "Test" appears in A37686 that row and all the below Rows till the last row should be deleted.
View 9 Replies
View Related
Mar 19, 2014
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
View 14 Replies
View Related
Nov 14, 2012
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
View 4 Replies
View Related
Dec 21, 2013
How can I extract rows from one sheet into another, based on certain criteria?
View 1 Replies
View Related
Feb 21, 2007
My knowledge of Excel is quite basic, so i had little luck searching for this one.
We have a main data sheet in which everything is inputted, but i would like that data to be split up and reported (copied into) in 2 or 3 other sheets, depending on a single criteria.
Is this able to be done so these 'report' sheet are constantly updated, and the columns in the reports dont include irrelavant columns which are in the main data sheet.
View 14 Replies
View Related
Nov 21, 2012
few macros/vba that delete rows based on criteria in a cell.
I'm after something a little different. I have a workbook with sheets called Raw Data1, Raw Data2,Raw Data3, Raw Data4 and Raw Data5 and Menu.
There is a column of data in each of the sheets which has a column header of 'Location', however the column where this is located will vary from sheet to sheet. For example in Raw Data1, this is column 'J' and on Raw Data2 it will be column 'M', ( I'm not at work and can't remember the specific column positions for all sheets re: 'Location').
Is it possible to have on the 'Menu' sheet, say in cell B5 a value of 'Locationa' and have rows be deleted in each of the Raw Data that do not match the value in B5?
View 4 Replies
View Related
Jun 30, 2014
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code:
Sub SummaryCalculations()
Dim lr As Long
Dim i As Long
Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
For Each ws In SheetArray
[Code] ...........
View 8 Replies
View Related
May 21, 2014
I need to filter a large database using multiple OR criterias.
Database is CUSTOMER NAMES in each row with CONSUMED PRODUCTS following in each cell.
I want to filter two or more products and list customer names in sheet2. Like listing customers using salt or pepper Filter criterias will be entered into cells in sheet2 with results shown below and I want search to be active and alive just like vlookup function.
Sheet1
CUSTOMER NAMES---CONSUMED PRODUCT---CONSUMED PRODUCT---CONSUMED PRODUCT
GEORGE--------------SUGAR-----------------SALT
MICHAEL-------------PEPPER-----------------CHILI
JACK-----------------BREAD------------------SALT-----------------COFFEE
View 1 Replies
View Related
Nov 29, 2011
I have a sheet of data. The data starts in row 4 and can be variable in length. I want to delete rows that do not meet a specific criteria, for example a location, Leeds, which is in column "i" of the table. I have written the below but it seems to delete data from row 1 rather than row 4 and repeat down each row
Code below
Sub deleterows()
Dim i As Integer
Dim intCounter As Integer
Dim strLocation() As String
p = Range(Cells(4, 6), Cells(4, 6).End(xlDown)).count
[Code] ..........
View 3 Replies
View Related
Feb 28, 2014
I am trying to adapt a macro which deletes all rows in Worksheet 1 where the date in column K differs from a date in Worksheet 2. The date in Worksheet 2 will change each day.
I think the macro below could be used, but don't understand how to replace the "Value = ":70:" with a reference to the master date in Worksheet 2.
Sub test() Dim lr As Long, i As Long lr = Range("A1").End(xlDown).Row
For i = lr To 1 Step -1 If Cells(lr, 1).Value = ":70:" Then
Cells(lr, 1).EntireRow.Delete End If lr = lr - 1 Next i End Sub
View 2 Replies
View Related
Mar 3, 2014
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Jun 20, 2013
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
View 9 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Jan 3, 2010
The number of rows you are pasting and then you can select that same number of existing rows and use "insert". This is what I'm trying to achieve:
(before paste)
A
B
C
(after pasting unknown number of rows)
1
2
...
n
A
B
C
Is there really no built-in way to do this?
View 6 Replies
View Related
Dec 6, 2013
I have a table with 3 columns with an unkown number of rows (text, date, date) that is being imported daily.
I want to create a 4th column with dates starting from today and each subsequent row be one day earlier. I want to look at 30 previous days.
I then want to count the number of rows (looking at column 1-3) with the following criteria:
Countif column2<= "date in colum4" AND column3< "date in column4"
View 6 Replies
View Related
Sep 22, 2009
Here is what I have. 4 Worksheets. The first worksheet is a summary page. I have 350 personnel that are broken down into three different groups. So each group has it's own sheet. Here is what I need to accomplish. Results need to be posted on the summary sheet.
I need to compare cells B2 & D3 for each row on a worksheet and display the number of times they match on a worksheet. For example how many times does EP & EP match on a certain row. I need to compare cells B2 & D3 for each row on a worksheeet and display the number of times they don't match on a worksheet. For example how many times does EP & MP occur. I've attached an example for reference
View 5 Replies
View Related
Apr 14, 2014
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
View 10 Replies
View Related
