If I just one number in each each (row 1-100) for example, but in different columns, is there a way I can copy all of these numbers so that they are all in the same column--that is, they would stay in the same row but now they would also be in the same column.
View 2 Replies
I want a macro that copies all columns data in coulmn a which starts from row 2 and delete rest of columns data.
see mentioned below example....
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
I am going to explain the issue with a photo linked below
Capture2 | Flickr - Photo Sharing!
Basically i want to match data from column one with data from column 3 if true then copy the data in column 2 to columns 4 in the same match row.
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I have a large spreadsheet converted from pdf whose data still appears in A4 reading format.
I need to move part columns of data from 6 columns to form 1 large column in column A.
For example, move range B8 to B76 beneath range A8 to A76 and range C8 to C76 beneath that etc, page by page working through all 270 pages !
Also need to delete unnecessary 'page headers' throughout as in rows 2-6
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
I have two worksbooks both with a big load of (filled)columns, now i want to copy the columns from the first workbook between the columns of the second workbook, the only thing is that in the first workbook the columns are nicely put together, i want to copy them in the second workbook but here they must me placed 7 columns apart from eachother. This is because the other columns are already filled with other data I need. Is there some way to do this.
View 5 Replies View Relatedgetting a vba formula to copy values from two columns and paste it in 3rd column on the click of a button.
For example:
if I have 3 rows filled in column A and 5 rows filled in column B then i need a formula to copy 3 rows in A and 5 rows in B and paste it to column C. so column C will have 8 rows now.
The number of rows the value can be entered can vary. [ example: sometimes we may have 6 rows filled in A 2 rows in B ]
I'm trying to create a macro that will look at the values in one column (column G) and whenever there is a new value, it will copy the data from 2 other columns (I and J) into a new sheet with the original column as the title. I can't think of a better way of explaining that so I've attached a sheet with 'Raw data' being the source sheet and 'Outcome' being the hoped for final product.
I have color coded the sheet to show where the data is coming from, but do not want the colors in the actual sheet.
Was looking into this, but basically i have a repetitive task of copying contents from various columns, and pasting them into 1 column.
1 right after the other. I figured there could be a way for a macro to copy contents from multiple columns and paste them into 1 column.
I have including 2 files, 1 from the start of the file, and 1 how it should be so it will have clarify what i am trying to do.
So basically if you open book1 , i have factory install tabs,
I need the columns contents from the first tab the (5k-20k) starting with Column B, then E, then H, and so on( Every 3rd column starting with B ) to be copied and pasted in Column A of the (Factory Install Tab) ( last tab ).
If you open the 2nd file this will be clearly understood. In the second file in the factory install tab you will notice i did the first 2. I highlighted each starting part in yellow just so its easier to see. SO in column A you should have all the contents in the 5k-20k tab ( starting with b every 3rd ), pasted in column A 1 after the other.
The next tab is the 30k tab, i need all of the columns contents copied starting with B ( every 3rd again ), copied in Column C of the Factory Install tab. Basically every tab's contents needs to have its own column in the Factory Install tab.
If anyone could help that would be great, this is a very time consuming process manually, and it would seem like a macro could be made to easily copy contents.
I got 3 columns of cell values as follows:
Demo 1
COL A COL B COL C COL D
_ 12 14 16
_ 32 12 18
_ EA LW RA
Demo 2
COL A COL B COL C COL D
12 12 14 16
32 32 12 18
EA EA LW RA
14
12
LW
16
18
RA
Can data of the 3 columns be copies (by vba code) to the blank col A in the exact sequence as shown in Demo 2?
I have one worksheet with a series of columns (version 1, version 2, version 3). Each column contains one or more number values.
I would like to:
1. copy the data from each of the columns to a single summary column on another sheet.
2. update (append new data to) the summary column each time I add a new column to the first sheet.
Having trouble attaching file, so here is sample data with three columns.
Ver. 1 Ver. 2 Ver. 3
154261895618382
154951914118530
158211940918606
169761944418614
170961946918651
172491955318690
177281963218720
183761972418840
186881976619039
1883019814
1884819820
1890519875
19086
19197
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
I have attached an Excel workbook to try to help explain my problem. At the moment I am completing the following process manually but wonder if anyone knows of a way I can automate the process:
The data collected from the instrument are in columns A and B. I need to copy the data from A2:A99 (i.e. the highest angle to the lowest angle) into column G (starting in cell G9). Then copy the corresponding torque values in B2:B99 into column E (starting in E9). I then need to copy the next string of data from A100:A210 (i.e. lowest angle to the highest angle) into column AU (starting in cell AU9) and again copy the corresponding torque values in B100:B210 into column AS (starting in cell AS9).
I need to continue this process of copying the highest angle to lowest angle then lowest angle to highest angle and the corresponding torques from columns A and B respectively into the following columns.
Column Copied To Copy From A Copy From BRow Number
O M 211:323
BC BA 324:427
W U 428:533
BK BI 544:634
AE AC 635:738
BS BQ 739:842
AM AK 843:947
CA BA 948:1052
To complicate things slightly I have many data sets that I need to do this with and need to be able to use the formula or macro to also process these, however the length of the string of data (i.e. the number of values between highest and lowest angles) is different for each string of data therefore it is not as straightforward as copying the same number of values each time, so the formula or macro needs to look for the highest angle then the lowest followed by the lowest angle then the highest.
I would be extremely grateful for any suggestions or help you may be able to provide as this could save me days of data processing.
I have a spreadsheet which is updated daily. Row A of the sheet has the date in it, and every day a new column is created for the that set of data. I have the below code which works at the moment:
[Code] .....
I want to use this same code on another spreadsheet to do the same process (I need to copy and paste 4 columns (A,B,C + D, into E, F, G & H, then tomorrow it will copy E, F, G & H into I, J, K &L etc etc)). The problem I'm having is that A1:C1 is a merged cell, then D isn't (used as a border to separate). So when it is copied I need to select the merged cell columns and column D (i.e. A:C & D on day 1) and paste it into E:H with E1:G1 merged.
I'm trying to write a program for work. One sheet (whereiseverything.xls) will have a list of parts column E and where it is in the process column (k). Column E of this sheet will have multiple part numbers. (Sometimes duplicated.) I would like to figure out how to write a code to Auto filter (whereiseverything.xls) sheet and copy only one P/N from (whereiseverything.xls) column E onto another Workbook Worksheet (Commit status.xls) column. After that the sheet must copy all of the locations of that P/N from whereiseverything.xls column K into and under the P/N of the Commitstatus.xls.
It will continue to autofilter and copy from where is everything, the "one" p/n and all of its locations into another empty column of Commitstatus.xls until it no longer has part numbers to autofilter on whereiseverything. I am extremely green on VBA programming but here is my first attempt.
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Columns("D:D").Select
Selection.AutoFilter
Windows("Where is everything commits .xls").Activate
Windows("whereiseverything[1].xxx").Activate
Selection.AutoFilter Field:=1, Criteria1:="7516113-905" \<--this Is one p/n
Columns("J:J").Select
Selection.Copy....................................
I am trying to copy rows that match a date range but I only want some of the columns to be copied to a pre-defined sheet.
For example, if the row is selected as a match because it is within the desired date range, I want the data in columns 'A-F', 'I-J','N-O' to be copied to the sheet 'Report' starting in 'A3'.
I have this formula:
=IF(T8=2,"6",IF(T8=1,"3",IF(T8=0,"0")))+IF(T9=2,"4",IF(T9=1,"2",IF(T9=0,"0")))+
IF(T10=2,"6",IF(T10=1,"3",IF(T10=0,"0")))+IF(T11=2,"4",IF(T11=1,"2",IF(T11=0,"0")))
and when I copy it down, I would like all the t's replaced by u's (since the data is in columns)
I'm using the code below to compare columns on two sheets (1 column for each) and where there is a match, copy data from the 'Source' to 'Destination' sheet.
[Code] ...........
The code works fine, but I'd like to amend this, but I'm a little unsure about how to proceed.
The script currently compares column C on the 'Source' sheet with column D on the 'Destination' sheet and where a match is found copy column G from the 'Source' sheet and pastes this to column O on the 'Destination' sheet.
I'd still like to copy and paste the same columns, but I'd like to compare two columns from each sheet, so from the 'Source' sheet compare columns C and E to columns D and J on the 'Destination' sheet.
I am trying create a macro that will create a new work sheet on an existing workbook. I have minimum experience writing a macro, but I do know how to effectively record one. The issue is, I need the macro to copy multiple columns down to the end of the data and pasting it into the new workbook at the end of the data already pasted-- rows of data are frequently added to the workbook.
View 4 Replies View RelatedHow can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies View RelatedMy data looks like this in one sheet:
A
2
B
C
D
1
E
F
3
G
H
I
Where A is associated with 2 other letters, B and C. D is associated with one other letter, E, and F is associated with 3 other letters. I want an automated way to paste this into 2 columns in a new sheet, like this:
A
B
A
C
D
E
F
G
F
H
F
A
2
B
C
D
1
E
F
3
G
H
I
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
I have some data from many csv files.
I would like to record/create a macros to open the file and paste 4 columns worth of data into another spreadsheet. Making sure the data is pasted in the correct column and doesn't overight data already in a tracker. Ie. paste it into the next available space.
Output.csv
I have a excel worksheet with the following columns: First name, Last Name, Email address, domain of email, product type, date registered. The list consists of about 50,000 entries. I want to sort the list by the domain of email(which I am able to do already) Once this is done, I want to find all instances of where a domain appears at least 10 times on the list(such as webmessenger.com appears 40 times, so I want to get that data).
For those instances where the domain appears at least 10 times, I want to pull those rows out of the intial list and put them in a new list(the new list will be sorted by domain and will only have people who have a domain which appears at least 10 times). To make this a bit more clear, The initial list I have is a list of people who registered to use the software my employer makes. We are trying to locate companies which may have many people using our consumer version of the software. When there is a large amount of people in the same organization using our software, it would benefit them to upgrade to the enterprise version due to enhanced managment features. By running this filter, I can see which companies have at least 10 users registered to use our software. Of course I will remove any Gmail/yahoo mail/msn/hotmail... pretty much any public email domains and just leave the ones that are obviously corporate emails.
So far, I think it probably has to be done with a pivot table... I was able to get a table that tells me how many instances occur from each domain, but I cannot get it to display the actual data(it just says IE. company.com 200, yahoo 120, etc... I need it to show me the 200 rows of company.com emails and extract them to a new sheet so that I can then follow up with company.com and see if they are interested in the corporate version.)
I have exported a text file from a universe database and need to import it into excel.
Below is an eg of one section. The text file contains approx 257 of these, all one below the other.
Between each set of dotted lines is one user profile (not data all shown in eg) .
Each one (user) is NOT the same amount of lines(rows) deep and only the dotted lines separate each user.
A simple import places all data into one very long column.
I need a way to place each user in there own column.
I have user names as column headings the labels of the values below as row headings. I cannot change this.
Manually entering the data took a very long time and i need to update this workbook regularly.
In the text file, " the variable......: value " (eg UserCode.....: XYZ) sets are all lined up so that using a text editor, with column mode, I can delete all the data headings/labels up to the space after the colon.
This leaves me with 7000 rows of values (eg XYZ) one column wide and various numbers of rows deep per user.
Is there a way to import the data and seperate each user via the dotted lines or other so that each users data is contained in consecutive columns. 1 user profile per column.
The standard import utility allows for column placement (delimted, fixed width). Can this be done on rows, sort of flip it 90 degrees and use the dotted lines as column markers. Just guessing now. Any and all assistance would be most appreciated.
Another issue (not as important but still helpful) is that the "procudures barred" section of user profile can also be one row(line) or serveral. Problem is each Name...:Value set must be on one row(line) for everything to match in the work book.
Using custom macros in my text editor i moved all the 'proc. barred' data to a single row. Alot of manual editting was involved and any ideas on this area would also be muchly appreciated.
One EG user profile (not shown, but all the colons line up) ....
I have a time card report which will record the time spent on work for each employee. Each month, i have to generate the time card report and copy the data to my master file. Is there any code that can auto copy the time card entry directly to the master file? I only need some of the entry on the time card report, some of the column can be ignored.
I was thinking of creating a macro that will prompt me to choose the file to import as there are different file for different individual. Attach here with the master list (Demo.xls) & the time card for one individual (Nov-KTTHAM.xls) for reference.
I want to copy the data on column B of the time card to the column A of the master list, column C to column B, column D to column C, column E to column D, column F to column E and column G to column G.
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
