Macro To Copy 2 Columns To New Sheet Based On Value In A Different Column
Jul 4, 2014
I'm trying to create a macro that will look at the values in one column (column G) and whenever there is a new value, it will copy the data from 2 other columns (I and J) into a new sheet with the original column as the title. I can't think of a better way of explaining that so I've attached a sheet with 'Raw data' being the source sheet and 'Outcome' being the hoped for final product.
I have color coded the sheet to show where the data is coming from, but do not want the colors in the actual sheet.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 01:00 AM 9 10 11 12
Sheet 2 7/27/13 12:00 AM 1 2 3 4 7/27/13 12:15 AM 5 6 7 8 7/27/13 12:30 AM 7/27/13 12:45 AM 7/27/13 01:00 AM 9 10 11 12
I have a master data sheet with the structure as below: I need a few of the columns (i.e. not all) to be copied to another (filter) sheet (starts from Row 20 say). The "notes" column should be fed back to the master list. If the condition changes in the master list, the entire row (including the data entered in notes) should be removed on the filter sheet.
The filter sheet structure is as below:
I initially used Index, Small, Countif to pull data to the filter sheet but could not "input" into the cells as they all held formulas in order to copy to the new sheet.
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
I have a single sheet that lists available items, prices, etc. When doing quotes, you simply put y/n in Col:A for each item. I then want a simple macro that will copy all of the rows with "yes" into a second sheet. Sample data with end result attached.
I did try and butcher this macro to do what I want, and whilst it does copy data across, it's not really working. Firstly as I think it is searching along a row and copy columns, whereas I need to search a column and then copy rows.
I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
I am trying to copy the entire row based on values in column A. I have 13237 rows of data. Column A is grouped into about 200 categories with corresponding data in B-F. I would like this to automatically copy the data into new tabs based on the groups in column A. I would also like the tab to be renamed to the value in column A.
I have a spreadsheet that is used to store statistical information on a monthly basis, some of this information may be incomplete and so will need to be acted upon month by month, What I need to do using VBA is: At the close of the spreadsheet check sheet1 and if there is any data (text) in cells N – Q on any line If there is move to sheet3 check for the next blank line then paste the data from only certain fields i.e. A,B, N-Q,R,S
Here is another problem
As the sheet will be used on and off during the month I don’t want data that is already been moved across to sheet3 to be copied again so there needs to be someway of checking if the info is already there? I have code now for the find last cell part of the problem.
Sub FindLastCell() Dim LastCell As Range With ActiveSheet Set LastCell = .Cells(.Rows.Count, "A").End(xlUp) If IsEmpty(LastCell) Then 'do nothing Else Set LastCell = LastCell.Offset(1, 0) End If End With LastCell.Select End Sub
Was looking into this, but basically i have a repetitive task of copying contents from various columns, and pasting them into 1 column.
1 right after the other. I figured there could be a way for a macro to copy contents from multiple columns and paste them into 1 column.
I have including 2 files, 1 from the start of the file, and 1 how it should be so it will have clarify what i am trying to do.
So basically if you open book1 , i have factory install tabs,
I need the columns contents from the first tab the (5k-20k) starting with Column B, then E, then H, and so on( Every 3rd column starting with B ) to be copied and pasted in Column A of the (Factory Install Tab) ( last tab ).
If you open the 2nd file this will be clearly understood. In the second file in the factory install tab you will notice i did the first 2. I highlighted each starting part in yellow just so its easier to see. SO in column A you should have all the contents in the 5k-20k tab ( starting with b every 3rd ), pasted in column A 1 after the other.
The next tab is the 30k tab, i need all of the columns contents copied starting with B ( every 3rd again ), copied in Column C of the Factory Install tab. Basically every tab's contents needs to have its own column in the Factory Install tab.
If anyone could help that would be great, this is a very time consuming process manually, and it would seem like a macro could be made to easily copy contents.
I want the column to be pasted on the first empty column in the other sheet. Additional information: I'm constructing an excel-file that has 4 worksheets. First sheet has all the workable data. Everything is ordened in columns. Column 1 has all the 'first information', column 2 all the 'second information'.
Second sheet has all the formulas. On this sheet I only have to select the data I want to use, for example the data of the 'first information'. On the third sheet will all the results be punt. All the results will be put in a single column again. The fourth sheet needs to contain all the results, column by column.....
I'm creating a workbook to keep track of my utilities payments, one sheet for one utility and so on. I like to copy two cells from each sheet to another one to keep me updated of the amount to pay and the date. an example: column A with text, if text "NEXT" appear in column A, copy the value of two cells (at columns B & C) at the right of "NEXT" to another worksheet, if that possible? Below is a photo as an example:
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
We're working with a large workbook with data from A5:P20000 on sheet1.
I need to be able to pull data from sheet1 to sheet2 based on the invoice number in column A on sheet2.
Sheet2 will have different invoice numbers in column A, some of these invoices numbers are in column H on sheet1. I need excel to find these invoice numbers and copy the data from that row on sheet2 to the row with that invoice number on column2.
Example: Sheet2 A5 has invoice number 1234457 This same invoice number is located on sheet1 H3400 Need to copy to sheet2 (starting in cell B5) the following cells from sheet1 (B3400, C3400, E3400, G3400, H3400, I3400, J3400, K3400, M3400, N3400).
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
Lets say we have data in Column A, B, C and D and no row left blank. In the column A no cell left blank however in B, C, D any one cell only contain a value in that row. If B10 has any value in it then C10 and D10 are left blank (not empty). I want to segregate the data in Column A based on the value in B, C or D. So this one column data ( that is Column A) will split into three column. this segregated data to be put in E, F and G.
Wherever Column B has any value that's greater than zero content from the column A from the same row should copy to the E, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the F, Wherever Column C has any value that's greater than zero content from the column A from the same row should copy to the G.
I am searching for a macro that will find duplicate value in row A2 (id) then copy its corresponding column to a new sheet.. please refer to my attachment, and see the result i want on sheet2 and sheet3
i need a macro that will copy data based on the column headings, i have two worksheets, the first worksheet is the raw data and second worksheet will be the results sheet, the issue is the headings i have in raw data is different to the headings i have in the results sheet and the heading will not always be in same column in the results sheet, so for example in Raw data i have heading Quantity and in destination sheet i have heading Units, so the macro should copy the data for quantity in sheet raw data and paste to sheet "Results' under heading "Units". The header row on both sheets is row 3. I do have more headers but if I know how to do one then i can apply the same method for the others.
I am having trouble with my macro. I have attached excel sheet for reference.
Basically, I want a Macro that Looks up columns B & C of current sheet and matches it with table in the charges tab, and then returns hourly pay in column D.
I have created the macro but it's giving me Run time 1004 error.
Also, my formula is incorrect. Maybe that's why my macro isn't working?
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date Column D = loan# A Column E = loan# B Column F = status Column H = followup needed (Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows: Column G&H = Merged cells where due date will need to go Column I&J = Merged cells where loan# A will need to go Column K&L = Merged cells where loan# B will need to go Column M thru S = Merged cells where followup needed will need to go
I have an Excel database of department contracts with a Master worksheet. I have created a worksheet tab for each of the departments. Column G has a dropdown list for each department. When I enter a new contract onto the Master I want it to auto copy to the coordinating worksheet based on the selected department.
If possible I would also like it to enter the newest contract would enter into the coordinating Contract Party entered into column D. (ie... If Hospital A is entered in column D on master, the new entry on the worksheet being copied to will be entered under the last Hospital A, if Hospital B is entered on Master it copies under Hospital B). If this isn't possible then I am not too worried about that part.
I have attached a blank version of the file. Current Master 5-15-14.xlsx‎
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have a worksheet, "District", that has names of team members from A2:A (The number of team members will vary, so I would need the macro to stop when the list ends). I need these to be distributed to column A on another sheet, "Input", from A11 down until it hits a row that has a blank cell in column F. I've tried a couple of things, but just can't seem to get it to work.
