to copy the information from A3 to D3 in another workbook if in colum E "Delivered" is selected from the drop down menu, using vba code.
The thing is that drop down menus are dinamicly dependent. If "Expected" is
selected in E3 then F3 should be empty. If "Delivered" is selected then from
the menu in F3 i have the choise from, let say 20 clients
When I choose "Client1", for example, i wont the vba code to copy the information from A3:D3 range and paste it to another workbook, in the sheet "Client1"
I don't know where to start from building this code,
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
I deleted the data and made up some figures but kept the format to protect privacy. Highlighted blue and green because it's possible to have the same name have 2 different types. I put in dashed lines to more clearly divide months.
1. For each UNIQUE "Name" and "Type" add a new row starting from last entry 2. Copy A,B,C to new row 3. Copy LAST (most recent) "End Balance" from column "I" corresponding to last person 4. Copy column "I" formula into new role
So Name, ID#, type, column D and the formula in "I" (excluding "Name" and "Type" duplicates) should be added to the end of the sheet with their new row
Unsure if possible:
5. Make old amounts (columns D,F,H,I) not count towards the totals 6. Totals reflect new amounts only so values aren't counted multiple times
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA() Dim rcnt As Variant, i As Long, j As Long rcnt = Range("A" & Rows.Count).End(xlUp).Row j = 4 For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
I have a bunch of data (by date) on one worksheet and I want to output results to another worksheet (in the same workbook). I want to be able to alter the rolling period for some financial calculations (thus the rolling period countdown). The code I've written doesn't suck the data from the second worksheet. The first worksheet is where vba is launched from. I've attached all the code.
Private Sub CommandButton1_Click() Dim rowworking As Integer Dim rowoutput As Integer Dim rollingperiodcountdown As Integer Dim Date1 As Date Dim expectedreturn As Single Dim returnwithedc As Single Dim trackingdifference As Single Dim returnwithbetamodulation As Single Dim betamodulationtrackingdifference As Single Dim improvement As Single Dim x As Integer Range("a5:g15000").Select Selection.ClearContents Range("a5").Select For rowoutput = 5 To 500 Worksheets("Rolling Period").Activate For rowworking = 3 To 15000 rollingperiodcountdown = Cells(rowworking, 9).....................
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
Need to copy certain data from sheet1 to sheet2 with the followoing requirement. Copy row from Sheet1 to Sheet2 only if Column D in Sheet1 is >0. See sheet3 for what i need
I'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.
I have run into a problem which is quite unique. I have data for 40000 football matches. The Sheet "Raw data" has the raw format of the data.
Sheet "Goal Difference (Home - Away)" is pretty important. This sheet is the goal difference between the home team and the away team. "A5:A95" has the number of minutes in a football match and we are trying to track the way a team progresses throughout the match. Lets assume the score is 0-2 for the 1st match and the goals were scored in "39, 76," minute by the away team. So the data will read 0 from 0-38, -1 from 39-75 and -2 from 76-90.
Sheet "Red Cards conceeded_Home" tracks the number of red cards as the match progresses through 0-90 minutes for the home team. The catch here is if the score reads Red Cards : "1 - 2" and the Red Cards Time reads "26, 15, 18". The red card was issued to the home team at 26th minute, The away team received it at the 15th and 18th minute. So the data will read 0 from 0-25, 1 from 26-90.
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
I'm looking to create a macro that copies a row of data and pastes it within a range when a condition is met. For Example, if A1 of the header Row matches A2 within a Range of A2:A100, I want to Copy the A1 Row and Paste Special Values over the Match in A2. Likewise if the match is contained in Row 100, I would like to Copy from A1 and Paste Special Values into A100.
I've schedule header date 1-oct,2-oct,3-oct.....etc and have two cells Last Date and Hours I need from those cells once i add date and hours to copy the hours and paste in schedule header in the exact date..
for example # Last date Last Hours
[Code]....
but was too slow takes long time.
2nd VBA code to copy last hours to schedule date based on condition on last date cell.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB: Function DoOne(RowIndex As Integer) As Boolean Dim Key Dim Target
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
I am trying to do the following....I have data in three column in the "historydata" sheet, A, B, C. A lists the dates, B lists categories, and C lists some data. The data in column C is defined by the date and category in column A and B. What I want to do is...I want to copy data in C to the next empty cell in another spreadsheet if it meets the date and category condition. (for instance, if (y,A)=9/17/2007 and (y, B) = bond A, then I want to copy (y,c) to the next empty cell in sheet "marginreq" based on the first column. Here is my code...but it doesn't work.
Sub OJOM()
Dim A As Integer
A = 2
Do While Worksheets("Historydata").Cells(A, 1) <> ""
If Worksheets("Historydata").Cells(A, 2).Value = Worksheets("MarginReq").Range("B5") And Worksheets("Historydata").Cells(A, 3).Value = Worksheets("MarginReq").Range("B7") Then
I'm setting up a spreadsheet for work and i have a question. I'm not familiar with the formulas. If i want to set up a formula to where if i type "complete" in the cell it will move the entire row over to the next sheet.
I have created a loop to go through a series of records on one spreadsheet, and if it finds a "100.00%" case in column G then it will cut that record, move to another spreadsheet and paste it there. I am so close but I can't seem to get the pasting part to work and I've tried quite a different number of things.
Dim cellPercentage As Variant Dim cellLocation As Range Dim x As Integer Dim found100PercentCases As Range Dim cellAddress As String
I have 2 sheets, sheet1 and sheet2. On sheet1 I have a cell (w,3) which displays either "OK" or "Needed". It will be like this for every row on the sheet. On sheet2 I have more information. I have been trying to create a macro or VB function that everytime the workbook is opened will scan the entire column W for any that say "needed" and if/when one is found copy the data in the cell in column A of the same row from sheet1 to column A of the first blank row in sheet2.
So say cell w,6 displays "needed", I then want to have cell a,6 copied from sheet1 to sheet2 into the first column A that is blank. I don't really care if when w,6 changes to "OK" it removes the entry on sheet2 or not, in fact if it does that would be great.
Here is the code that seems to be not so complicated and has copied information from one sheet to another, can't get it to work consistantly. I copied it off a similar post on this site and am not sure what the last value = "1" is doing but I doubt its helping my cause. The cell I need to trigger the action is in the 23 column, the cell I need copied is always in the first and the cell I need it to be copied into on the 2nd sheet is always in the first column as well. I'm pretty good with regular logical statements but I feel that a lack of knowledge about all the available commands is really whats hurting me on this....
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone Vodafone Ericsson Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
