I need to copy the data form Cell "C" to Cell "D" only if Cell "D" is empty
i have been using the following code but it will overwrite cell "D" regardless if data is present or not.
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
I've been looking for a way to get the needed result without using macro but i think it can't happen. I'm using excel for forecasting
I need a formula or script to Vlookup a value for me from another sheet if depending on the date.
If the Today date is > then the Date mentioned in Cell A1+15 days i want A2 till A167 to run a formula that would lookup a certain value in another sheet and replace the current value in A2 till A167
For example
A1= August
A2 = 20
A3 = 40 ......
I want when im in 15 August a formula that will replace the foretasted quantity 20 with the real quantity found in sheet 2. If I am not 1 August i don't want the formula to run.
I would like to know if there is a way to change the font type in a cell, if a condition is true in another cell. e.g font in cell C3 is Arial Rounded MT Bold and if condition is true in cell F3 then font is changed to Arial Narrow.
View 8 Replies View Relatedhow to denote a cell as blank? I'm trying to do an IF formula for if the cell is blank.. Actually it would also work if the formula reads if the cell was NOT blank. Either one would work I just can't figure out the name of an empty cell. So I'm looking for this with the right word in the formula. =if(A1="blankcell",true,false)
View 2 Replies View RelatedI am designing a spreadsheet for my colleagues and I have run into a problem. Range U16 tu U and the first blank row has values TRUE or FALSE. The problem is you will never know if it's U16:U21 or U16:U90. The thing is to come up with a formula (no vba) that will count all TRUE values in that range. I found a formula on the internet to find the first blank column: =MATCH(TRUE,INDEX(ISBLANK(U16:U300),0,0),0) + 16 - 1
The formula works great and if I put it in, say, cell P2 it will return the correct result.
Now, the cell K2 has the following formula: =COUNTIF(U16:U300,TRUE). It Counts incorrectly. I do not want it to run to U300 but to whatever P2 returns. How can I do this?
Here's a simplified example:
ColA
ColB
ColC
Row1
A
Y
A
Row2
B
N
D
[Code] .........
I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.
The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.
Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...
I receive a huge spreadsheet with account numbers in col A and names in col b with dates in col g and amounts in h. However if there is more than one date and amount for the same account number and name, the people/program who originated the data left those fields blank.
In order to sort the list by name by date, I have been manually copying the data from the row immediately above to the blank row(s). (L O N G process) So if I have ...
I am wanting to have certain cells of data from one worksheet appear on another worksheet once the cells on the first sheet have data entered in them.
I find that I can do a simple formula to copy the cell but I want the cell to remain blank until data is added in the first sheet (it will be a mix of text and numerical entries).
How to copy paste data without replace existing data or keeping existing data?
it's possible??
I have a row of values TRUE and FALSE from a IF statement..
If one or more are true can i get a notification to come up saying
"Rents are Due" Press ok to continue..
Below is the data layout. I want to join values in value column if Condition is true. SO, for below situation answer should come ACE.
TRUE
A
FALSE
B
TRUE
C
FALSE
D
True
E
I want to perform a SUMIF if more than 1 condition is true. I can do a regular SUMIF if, for example, values in column A is > than 10,000, then SUM associated values in column F.
However, what if I want a SUMIF if values in column A is > 10,000, values in column B = “Yankees”, then SUM associated values in column F.
I have a series of checkboxes, we'll say checkbox 1-5. These are all listed on a sheet called products.
If for example you select check boxes 1,3 and 5 I need those to then be listed in a column in that order on another sheet called purchased.
If I went back and then uncheck 3 and check 4 then purchased would be updated.
I understand that if you take a cell and name it P1 for instance..and then on another sheet enter =p1 in a cell that they will update and share data, but I dont know how to pull from a check box..nor do I know how to assign a row of cells to accept multiple and changing information from those checkboxes.
If you look at the attached spreadsheet you will see 6 tabs. Main, New Cust, Quote, etc.
"Main" will be the sheet that everything is inputted. If there is a "Y" under new customer, I want the entire row to copy to the tab "New Cust". If there is an "X" under quote, struct design, or graphic design I want it under its approp. tab. The Lisa tab should take certain Sales-Person and copy entire row on the Lisa tab. The certain Sales-Persons are BS, PK, PB, PD.
Buttons are fine. The "main" page will be getting updated daily w/ new info so after entering new data, i can press the button and it should copy the above to its locations.
I have 5 cells on a sheet. When one has an X in it the other 4 go blank. It so I can keep track of who has ownership of a job.
View 6 Replies View RelatedI have following excel sheet.
IF condition is true then popup message window with Remark of corresponding columns.
Example : if during market time if Google current price fall below 295 then message window will appear SELL : Day support is break.
===============================================================================
Script--------------Current Price--------------Trigger Price---------------------Remark
===============================================================================
Axis Bank--------------500----------------------502-----------------------Buy : Resistance Break
Google-----------------300---------------------295-----------------------Sell : Day Support Break
HCL--------------------850---------------------865-----------------------Buy : First Sunrise Confirm
INFY------------------3215--------------------3150-----------------------Sell : Weekly Support Break
Current Price will keep moving up / down in live market
if current price > Triger price then popup window should come with BUY & Remark of that row
if current price < Triger price then popup window should come with SELL & remark of that row
Is it possible to have excel continually check if a columns used row count in a particular column is greater than a number before moving on to the next part of code?
The reason I'm doing this is because one formula will pull in data from bloomberg which can take some time (5 seconds or so).
Some other code that places formulas into other adjacent columns depends on the number of rows in the first column. So the code following the data pull wil fail if the above hasn't finished pulling yet.
I was thinking about doing something like a do nothing until true?
Here's what I have that is not working:
Do Until Range("A1:A6").Cells.SpecialCells(xlCellTypeConstants).Count > 5 Range("F1").Select
Loop
I expect that the number of used rows in column A should be greater than 5 once data is pulled. In this case I just had VBA select F1 until the count was greater than 5 before moving on. but I think it's interfering with the pull and will coninue to loop..
I'm looking for some help. I need a function that can check if each of two seperate values is less than one. If less than one then divide by 2. Then give me the average of these two values. So it could be that it takes 0.5/2=0.25 for one value and 3 for another to give me the average of 1.625.
I have two formulas that I have worked out to deliver the results independently. I would like to join them together into one formula and add an If condition that if the two match then add a "+" to the end of the string.
#1 finds the base value :
=IF(ISERR(FIND("/",I2)),I2,LEFT(I2,FIND("/",I2,FIND("/",I2)-1)-1))
#2 verifies the value is a valid color:
=INDEX(M1:M41,MATCH(J2,M1:M41,0),1)
I would like to join the two formulas together and if they match then add a space, " " and a "+" to the end of the string. If there is no match then return the base value.
I have another query that I believe can only be solved using VBA.
In a row of input data, some cells are duplicated from previous cells in the same row but in some instances, the user needs to be able to input different information.
e.g. M4=F4 if left blank and the same would apply to columns N=G, O=H, P=I & Q=J.
I have done some searching but nothing quite matches my requirements and recording a macro only produces the following result.
Can excel be made to play an alarm if a condition becomes true?
View 5 Replies View RelatedIn E5, put "INSERT". In G5, put the formula
=E5="INSERT"
Should I be getting TRUE as the result? I'm getting FALSE. Is something wrong or am I going mad...
I have "borrowed" the below code from a previous solved post, however am unsure how to adapt it.
View 7 Replies View Relatedto copy the information from A3 to D3 in another workbook if in colum E "Delivered" is selected from the drop down menu, using vba code.
The thing is that drop down menus are dinamicly dependent. If "Expected" is
selected in E3 then F3 should be empty. If "Delivered" is selected then from
the menu in F3 i have the choise from, let say 20 clients
When I choose "Client1", for example, i wont the vba code to copy the information from A3:D3 range and paste it to another workbook, in the sheet "Client1"
I don't know where to start from building this code,
using a formula to copy a cell A1. if A1 is blank, i need forumula result in blank instead 0...is it possible..
View 9 Replies View RelatedSheet OldData has 4 fields Bo# / Tag / ORG / ACCT
Sheet NewData has 2 fields Bo# / Tag
I would like to copy fields ORG / ACCT from Old to New if the Tags from New match with OldData.
