Copy Paste Based On A Condition
Nov 7, 2011
[URL]
I have run into a problem which is quite unique. I have data for 40000 football matches. The Sheet "Raw data" has the raw format of the data.
Sheet "Goal Difference (Home - Away)" is pretty important. This sheet is the goal difference between the home team and the away team. "A5:A95" has the number of minutes in a football match and we are trying to track the way a team progresses throughout the match. Lets assume the score is 0-2 for the 1st match and the goals were scored in "39, 76," minute by the away team. So the data will read 0 from 0-38, -1 from 39-75 and -2 from 76-90.
Sheet "Red Cards conceeded_Home" tracks the number of red cards as the match progresses through 0-90 minutes for the home team. The catch here is if the score reads Red Cards : "1 - 2" and the Red Cards Time reads "26, 15, 18". The red card was issued to the home team at 26th minute, The away team received it at the 15th and 18th minute. So the data will read 0 from 0-25, 1 from 26-90.
The same applies to the other tabs.
View 1 Replies
ADVERTISEMENT
Apr 19, 2013
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
View 3 Replies
View Related
Jan 25, 2010
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies
View Related
Nov 7, 2012
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
View 3 Replies
View Related
Mar 5, 2009
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies
View Related
Mar 19, 2014
I need some code vba to copy & paste data with filtering condition....
See workbook : upload paste visible.xlsx‎
View 5 Replies
View Related
Apr 25, 2014
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
[Code] ......
View 2 Replies
View Related
Mar 13, 2014
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
View 2 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Feb 18, 2009
I have a spreadsheet that I need to cut and paste data from one tab to another but only from columns B:K (as the spreadsheet has formulas that can not be alterred after column K. It must also paste that data for the hidden columns.
The condition on the data to be pasted in based on the tabs along the bottom.
So for example, anything that says Corn Products needs to be cut from the "standard customers" tab and moved to the Corn Products tab, and so on for the additional tabs.
I then need to un-check (hide) Blanks from the filter on the Standard Customers tab.
If possible, I would like run the Subtotals function in this same macro; the conditions for that are as follows
For each change in Shipper, Subtotal Billing for <<month>> (Column S)
Page break inbetween each Change in Shipper, then I would also like each subtotal figure bolded.
Also, this is something I must do every month, and each customer may have more or less lines or no lines at all in any particular month.
View 14 Replies
View Related
Sep 17, 2013
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
View 1 Replies
View Related
Feb 29, 2012
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
View 1 Replies
View Related
Dec 4, 2013
I am using the following code to update an invoice summary sheet from an invoice sheet but when a Credit Note is issued I would like the Nett� value copied across to be a negative figure. When a credit note is issued the value of Service Invoice Cell L2 = 2 and an invoice L2 =1.
VB:
Sub UpdateSummary()
' Updates Summary Sheet with Invoice Details
Dim InvoiceDate As Date, InvNo As Integer, JobNo As Integer, Company As String, Location As String, Nett� As Currency
[Code].....
View 4 Replies
View Related
Mar 10, 2014
I'm trying to set it up so that if a particular cell has any data in it, the contents of a different cell get sent to another. I want the no data/data to serve as a trigger.
As an example, if I put anything into cell A3, I want the contents of cell A1 to copy to H1. I'd also like it to be dynamic so that if I put something into cell B3, the contents of B1 get copied to H1, etc.
View 4 Replies
View Related
Oct 13, 2012
I've schedule header date 1-oct,2-oct,3-oct.....etc and have two cells Last Date and Hours I need from those cells once i add date and hours to copy the hours and paste in schedule header in the exact date..
for example
#
Last date
Last Hours
[Code]....
but was too slow takes long time.
2nd VBA code to copy last hours to schedule date based on condition on last date cell.
View 3 Replies
View Related
Sep 18, 2009
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
View 5 Replies
View Related
Jul 6, 2014
I will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
View 5 Replies
View Related
Oct 16, 2006
Attach is a sample of my project. I have to loop through B9:B80 in sheet("Raw Data") and capture the value of each cell. EG:
* if Value captured is 120A --> check with sheet("SP14F") from the row which contains the same value.
* i have to check that the aperture, outer and inner values of Layer 120A and so on..of the Raw Data sheet is the same as that of in the SP14F sheet.
* if the values are not the same, change the font to red
i understand that this task requires looping and arrays.
View 4 Replies
View Related
Feb 13, 2008
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies
View Related
Apr 17, 2008
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
View 9 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Nov 20, 2012
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
View 5 Replies
View Related
Feb 4, 2010
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies
View Related
Sep 7, 2009
I am wanting to paste formula from N1 till N X (X = varaiable row) where X reliant on Column A Row X. If Column A Row X has character "=====" it should paste N1 Formula all the way down till N Row X which is equal to A Row X containing "=====" .
I might be sounding complicated over here but it is a simple equation.. I have tried to approach this in the capacity i could by condition if Column A row x is blank delete the row.
View 2 Replies
View Related
Jul 17, 2014
I have a spreadsheet with two tabs Line Crew and Master Log. I have a macro that searches the Master Log Column H for a value "Line Crew" and if it finds it, it will copy that row (Specified range) to the Line Crew tab. My problem with the macro is that it keeps copying the same row. I would like it to move down to the next row search for "Line Crew" , copy and paste until it gets to the end of Master Log Sheet. I have attached a sample of the spreadsheet. Here is my code:
[Code] ..........
Attached File : Book1.xlsm‎
View 1 Replies
View Related
Jan 30, 2014
I have an Excel Spread Sheet that lists all of the people who have been issued Keys in your workplace, so the row has multiple information columns (Name, Department, Key Code, etc). One row is titled "Left Workplace" and you can select either a Yes or a No. Based on that selction I want it to copy and paste into a different spreadsheet (Either Inactive - if "No" is selected or Active - if "Yes" is selected) What is the best way to go about this?
View 2 Replies
View Related
Apr 24, 2014
This code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm‎
View 8 Replies
View Related
Nov 12, 2008
a VBA code to do the following:
I have a worksheet consist of some 17,000 records - from ColA:ColDZ. In Datasheet, I have all values. From this, based on some values in ColA all records should be copied into another sheet(s).
I have attached a sample workbook in which I have explained the requirement.
View 14 Replies
View Related
Dec 28, 2008
I have a userform.listbox1 that is generated by entries made from another userform on a commandbutton1_click I want loop through the listbox, find the value on one sheet and copy/paste to another.
the code below is what i have come up with. I do not get any errors, it just doesn't copy/paste anything. Why sheet1 has over 5400 rows, sheet2 is blank
View 4 Replies
View Related
Mar 16, 2009
I've two sheets: "present" and "removed". I would like to have a whole row copied and deleted and existing rows moved up in "present" when I type the word "yes" in column E. The deleted rows are to be pasted into "removed", with two extra pieces of data - date removed and name of person removing it - to be asked in pop up boxes and inserted into col F and G respectively in "removed".
View 4 Replies
View Related
