I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
Is there a way to copy then paste specific cells from closed .xls files in one directory ( more than 500 files ), and how, if all files are with one known password protection( my own files ).
View 9 Replies View RelatedI have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
I need some code vba to copy & paste data with filtering condition....
See workbook : upload paste visible.xlsx‎
[URL]
I have run into a problem which is quite unique. I have data for 40000 football matches. The Sheet "Raw data" has the raw format of the data.
Sheet "Goal Difference (Home - Away)" is pretty important. This sheet is the goal difference between the home team and the away team. "A5:A95" has the number of minutes in a football match and we are trying to track the way a team progresses throughout the match. Lets assume the score is 0-2 for the 1st match and the goals were scored in "39, 76," minute by the away team. So the data will read 0 from 0-38, -1 from 39-75 and -2 from 76-90.
Sheet "Red Cards conceeded_Home" tracks the number of red cards as the match progresses through 0-90 minutes for the home team. The catch here is if the score reads Red Cards : "1 - 2" and the Red Cards Time reads "26, 15, 18". The red card was issued to the home team at 26th minute, The away team received it at the 15th and 18th minute. So the data will read 0 from 0-25, 1 from 26-90.
The same applies to the other tabs.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
[Code] ......
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies View RelatedI have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
I am using the following code to update an invoice summary sheet from an invoice sheet but when a Credit Note is issued I would like the Nett� value copied across to be a negative figure. When a credit note is issued the value of Service Invoice Cell L2 = 2 and an invoice L2 =1.
VB:
Sub UpdateSummary()
' Updates Summary Sheet with Invoice Details
Dim InvoiceDate As Date, InvNo As Integer, JobNo As Integer, Company As String, Location As String, Nett� As Currency
[Code].....
I have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
View 3 Replies View RelatedFeedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies View RelatedI have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
I am attempting to copy a range from one worksheet and paste it to a new worksheet when the system clock hits a specific time. It needs to run continuously and identify that a previous colum has been filled and paste into the next open column. I am just getting my feet wet. I have some code to begin with but I am getting a 1004 error.
'Application. ScreenUpdating = False
Sheets("mysheet").Select
Range("E3:E10").Select
Selection.Copy
Sheets("CmyOtherSheet").Select
Range("B1:B8").Select
ActiveSheet.PasteSpecial xlPasteValues
'rTime = TimeValue("12:31:00")
'Application .OnTime rTime, "RunThisProcedure"
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
I use the following codes to copy a cell which contains a picture and paste it to another worksheet. I think these codes copy more than just the picture.
Since pictures in Excel are not associated with cells, how do I copy just the picture in a particular cell and how to determine the size of the picture?
These codes are in a for loop.
Code:
tempCell.Offset(0, -1).Copy
Workbooks(fileName & ".xlsx").Activate
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).Select
Sheets(1).Pictures.Paste
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).RowHeight = tempCell.RowHeight
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies View Related
