Copy Rows Matching Condition In Column
Aug 11, 2008
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone
Vodafone
Ericsson
Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
View 3 Replies
ADVERTISEMENT
Jun 1, 2008
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
View 9 Replies
View Related
Jun 17, 2008
I'm looking to create a macro that copies a row of data and pastes it within a range when a condition is met. For Example, if A1 of the header Row matches A2 within a Range of A2:A100, I want to Copy the A1 Row and Paste Special Values over the Match in A2. Likewise if the match is contained in Row 100, I would like to Copy from A1 and Paste Special Values into A100.
View 2 Replies
View Related
Jun 24, 2008
I had a quick look around and couldn't find exactly what I was after my apologies if it already exists. I have attached a sample worksheet and I would like it the entire row A from sheet 1 to sheet 3 if the cells A2 OR D2 contain what is in cell Sheet2!A1.
View 3 Replies
View Related
Jun 6, 2008
I Have workbook-1 with 5 cells and 10 rows and in 5 th (E) cell i have value of 1 or 0 .
i want to selectively copy entire rows which has value = 1 in cell(E) and paste these rows into 2 nd row(A2 cell) of workbook-2 using Macro
View 5 Replies
View Related
May 21, 2013
Basically I would like to copy rows where the name of the person (in Column A) matches a separate this.
E.g.
Name
DOB
Peter
30/9/1956
Jim
09/1/1923
Paul
01/2/1966
Lookup list:
Peter
Jim
In Sheet2:
Name
DOB
Peter
30/9/1956
Jim
09/1/1923
Note that there are many names (this is just an abstract) so I think it requires a macro.
View 7 Replies
View Related
Apr 21, 2014
Copy rows from one Sheet to another based on a separate cell value But specifically, I am trying to copy row values from Columns C through column Z in Worksheet 1 of file POHeader.xlsx to row values Columns N through AK in file POReceiv.xlsx when the (Purchase Order #) values in Column A of each file match.
The reason is behind this is - one file has the unique Purchase Order number as the key without associated parts and the other file has the associated part number as the key with purchase order number attached.
I don't know whether I need to use VBA or if I can just use an index and match function.
View 9 Replies
View Related
Mar 31, 2008
1. I need a script to retrieve data (member number) from "Search List" worksheet and then to search it in "Members List" worksheet.
2. Once the search result (member number) found, e.g. 00311, it will copy the entire row to the "Only Selected" worksheet.
I have also attached a sample excel for better understanding.
View 9 Replies
View Related
May 5, 2008
I did a search to find a question similar to mine and I found this:
Copying data matching a criteria into another spreadsheet
This is exactly the same concept I am trying to accomplish, but don't know how to...at all. I couldn't follow the thread either.
I have a schedule which is constantly being updated (simplier version attached). I want to create a schedule, which will:
1) First ask which region to display the information for (I would like to create the same pop up menu to choose from)
2) Then, it will select only that region's information (all rows & columns) and copy them into a new worksheet and lists it all
-if you go back to the Master List, you can again choose another Region and it will create another new worksheet with that region's information
3) Don't know if this is making things more complicated, but at the bottom of the attached file, there are 3 lines under "Land".
Is it possible to list these under the same spreadsheet as the region it is pertaining to but classify it separately under "Land" (ie leaving space, so it is clear this is separate
View 9 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Dec 13, 2006
I have 2 workbooks.
The first one (Top Ten Auto Generator.xls) ( Sheet is Summary) has 1 row (13) with 4 cells that have data. A13 with date (today formula), B13, D13, and E13 are numbers. The cell range will be the same each time the data is copied (the workbook has a marco to generate the numbers each day already).
The date doesn't need to be copied, just the other 3 cells data (in the same order) using paste special.
The workbook that needs the cell data is a report ( Dashboard.xls) that has lots of different departments each using 3 columns for their specific data. The left most column A is the date listing to match.
The column Range for my department on that "Raw Data" sheet is "H", "I", & "J" where the "H" would get the data in "B13", "I" would get "D13", "J" would get "E13" for the date that matches the other workbook.
So the way it would work, is that once the vba is run the 3 cells from the auto generator are copied, then the vba opens the dashboard.xls and looks for the date in column A which matches the other workbooks A13 date value, and then the cells are pasted into that row, but in column H, I, & J.
Here's sort of some code that I put together to see if that would be easier to understand. I'm new at doing the vba so I don't have better code.
Private Sub CommandButtonpaste2dash_Click()
'get our data from generator
Windows("Top Ten Auto Generator.xls").Activate
Sheets("Summary").Select
Range("B13,D13,E13").Select
Range("E13").Activate
Selection.Copy
Workbooks.Open "Dashboard.xls"
Sheets("Raw Data").Activate
'look for the date in column A which matches A13 in the Auto generator
Some Code For finding the right date
'once found, paste special to the same row, but in column H (the 3 cells should paste together ok)
some code For pasting into H In the same row As the found date
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats
ActiveWorkbook.Save
MsgBox "Done!!!"
End Sub
View 9 Replies
View Related
Jul 10, 2006
I'm trying to use a vlookup or some formulae in sheet 3 that looks at AGDP and matchs column A with a number in statement file worksheet column b. If they match not all of them will then the row is cut and paste into Sheet 3.
View 9 Replies
View Related
Aug 8, 2006
I have 2 work books A and B. I want to be able to copy the entire rows out of WB A, which contain the same data as one of colums in WB B
e.g
WB A
Bob Smith | 3 Smith Lane | 0204587512 | bob.smith@emailaddress.com |
Tom Brown | 3 Brown Lane | 020241445 | tom.brown@emailaddress.com |
WB B
| bob.smith@emailaddress.com |
Would give me WB C
Bob Smith | 3 Smith Lane | 0204587512 | bob.smith@emailaddress.com |
Any way of doing this?? I know that i could use ' find' then copy the data, except i have around 300 records...
View 3 Replies
View Related
Jan 3, 2007
setup a vba code to find values which were separated by a certain value, thus there would be pairs of numbers sought after. What occured was that the first value is bolded, followed by the second not bolded, this pair would be separated by 75. Now I want to apply the same code, but instead of copying just the two cells which were separated to someone on the current sheet, I would like it to copy the entire row (as there is more data associated with it now) with the same bold/not bolded pairing to a new sheet, called "Numbers". I would imgine it be straight forward, yet I am very new to this and still tinkering.
Heres the ....
View 9 Replies
View Related
Sep 15, 2007
I have used marcos to create two worksheets and need to compare each row of the first three columns in each worksheet to find any rows which non-matching data. I am comparing retrieved data (Worksheet1) against a master list (Worksheet2) to ensure the retrieved data was entered correctly. The three columns of data include Manufacturer, Lot number and Date.
The row in which the matches will occur is random. The three values from the retrieved data only have to find a match somewhere in the master list. I can place both the retrieved data and the master list side-by-side on the same worksheet if that would make things more efficient for running the comparison.
The non-matching rows, if found, will be copied over to another worksheet along with its corresponding row in columns "D" and "E" found in Worksheet1. The additional data alerts me to the location where the data was entered incorrectly. The master list does not have any location data in it.
View 5 Replies
View Related
Jan 17, 2008
I'm trying to eliminate any .select or .activate from my code to speed things up and reduce screen flicker. At the moment, I have a sheet created at the click of a button. Basically for every date exclusive of weekends, there are 4 entries, for each date there are the following entries AM Metro, PM Metro, AM Regional, PM Regional. The user wants to be able to change the date range in the "overview" sheet and when there is data already in the other columns for these matching rows, have the input sheet update with old (copied??) info, if no previous data then add all 4 rows and sort... if previous date not in date range then delete entire row.
View 4 Replies
View Related
Mar 12, 2002
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
View 9 Replies
View Related
Apr 19, 2013
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
View 3 Replies
View Related
Jan 16, 2009
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies
View Related
Sep 18, 2009
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
View 5 Replies
View Related
Mar 8, 2008
I deleted the data and made up some figures but kept the format to protect privacy. Highlighted blue and green because it's possible to have the same name have 2 different types. I put in dashed lines to more clearly divide months.
1. For each UNIQUE "Name" and "Type" add a new row starting from last entry
2. Copy A,B,C to new row
3. Copy LAST (most recent) "End Balance" from column "I" corresponding to last person
4. Copy column "I" formula into new role
So Name, ID#, type, column D and the formula in "I" (excluding "Name" and "Type" duplicates) should be added to the end of the sheet with their new row
Unsure if possible:
5. Make old amounts (columns D,F,H,I) not count towards the totals
6. Totals reflect new amounts only so values aren't counted multiple times
exampleforforum.xls
View 2 Replies
View Related
Feb 4, 2008
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
View 4 Replies
View Related
Oct 14, 2006
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
View 3 Replies
View Related
Dec 12, 2011
I have a sheet with some survey data. the data covers about 4 months. There are about 2200 rows and 8 columns.
The "code" could be in there more than once as the person took the survey multipule times, but all other data is different. How can i pull out the whole row when the code is there more than once.
I want to know all the "codes" with multipule entries that took the survey more than once then trend there scores.
CentercodeRecommendReasonEnvironmentTraining ManagerOverall LHQTR27909415Learning effect4444LHQTR28844652
Center environment2222LHQTR45614375Service5555LHQTR96944292Service2222LHQTR144769543
Center environment4433LHQTR144769543Learning effect3433LHQTR155258791Service3213LHQTR168772563
Center environment2232LHQTR168772563Center environment3332LHQTR168772565
Learning effect4414LHQTR173991905Learning effect4445LHQTR192966385Service5555LHQTR193282534
Qualified teachers3344
View 3 Replies
View Related
Nov 20, 2012
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
View 5 Replies
View Related
Feb 4, 2010
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies
View Related
Sep 2, 2007
in writing a macro that does the following.
Right there data in cell A1 lets say LTP BY001 and then the next data in column A is LTP BY002 in cell A9. What I need to do is copy LTP BY001 from cell a2-A8 and then LTP BY002 From A10 until LTP BY003 appears lets say A15. Therefore need LTP BY002 copying from A11-A14. I need that to go right the way down the workbook at everytime their is a number change.
View 6 Replies
View Related
Jun 4, 2009
I have a worksheet which is created monthly by one of our company's employees which reports results for that months operations and successful audits. These audits are separated into various service lines and on the report which is submitted it takes on the following format:
1|Service Line|Data A|Data B|Etc.
2|___CR_______| Data | Data | Etc.
3|____________| Data | Data | Etc.
4|____________| Data | Data | Etc.
5|____________| Data | Data | Etc.
6|___DD_______| Data | Data | Etc.
7|____________| Data | Data | Etc.
8|___MS_______| Data | Data | Etc.
9|____________| Data | Data | Etc.
What I want to do is use a macro from another sheet that has the effect of: While ServiceLine = "CR" copy the row of that line and move it to my monthly summary workbook, sheet 1. Then when the Service line changes to DD have the macro copy that information to the monthly summary workbook sheet 2, and so on. The problem is, if I test the Service Line column each time it will be an empty string the majority of the time and I'm not sure how to combat that with my If, Do, For, and While statements. As I've thought about it there are two solutions that I can think of: someone knows of a way to test the row only if it has information in it, or if there is a way that I can copy the service line information down until the change in service line so I can test Service Line on each Row.
View 3 Replies
View Related
Feb 7, 2009
I have a worksheet that I want to export to a csv file. However, there are multiple rows that I want excluded in the export. These lines are recognized by the word "No" in column E. Is this possible?
View 3 Replies
View Related
