I have a data on column A that is written in different format like mfr12345, mfr12345 name, mfr 12345 name, MFR12345), in other word the data is written in different format. What I want is just copy the number only and not the text from column A to column B.
What is the formula for this.
Looking for a way to search an active cell (that has been found using macro) for numerical data and if there is some present paste this in a different location
If there is no numerical data in this this cell then paste a 0 in a different location
An example of the string contained in the cell
Product 7.5% wheat <- i would want 7.5 (or 7.5%) copied to a different cell
or
Product X <- i would want a 0 copied to the cell the 7.5 would be in from the above
I can find the cell to search in, i just do not know the correct way to extract the information I need.
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
I have a master workbook that needs to be updated with information from approximately 900 other workbooks. The master workbook is layed-out with the name of each of the 900 workbooks (minus the .xls extension) located in column A. The number needed from these 900+ workbooks is consistently located in cell J20.
Is there an easy way to open each of these 900 workbooks, copy the number from cell J20 and paste the number in the correct location in the master workbook?
I'm running Excel 2003. I have a workbook and in Column L I have a text description that includes one or more 5 or 8 digit catalog id's. What I want to do, using a function or vba, is to copy the id and paste it into Column M.
In cases where there are multiple id's I would want all of them to be entered into the same cell.
Example:
00123456
12345
All of the 8 digit id's have either 2 or 3 leading zereos that must be retained.
I've attached a sample spreadsheet. Thanks in advance for any pointers and/or assistance.
I'm trying to modify this line:
Range("A2").AutoFill Destination:=Range("A2:A10"), Type:=xlFillSeries
I trying to copy down a formula a set number of times based on a cell value or a declared value.
I have 20+ tabs that need to be copied monthly. That also means 40+ name changes (when you copy you get "copy of...". I am trying to get this down so I am hoping for the better. Anyways what the macro needs to do is copy the first x amount (lets say 3 for this demo) tabs (true full copy, formulas and all)
(YYYYMM Name) -- This is the setup, it is not current month, I do not mind inputting the YYYYMM if need be)
201010 Tab 1
201010 Tab 2
201010 Tab 3
To
201011 Tab 1
201011 Tab 2
201011 Tab 3
Then a popup at asks current reporting date (again this is not current date) for these new tabs only (all these tabs have a date field that needs to be updated) So I assume this will have to store an array of the tabs created. Date WILL go in the same row/column in all tabs.
Then copy paste values all prior months tabs to preserve the history in the old tabs
201010 Tab 1
201010 Tab 2
201010 Tab 3
Now 20+ tabs doing this for you can see how im about to lose my mind. I am stressing them to downsize this mess, so the X number would need to be a value i could mess with in code.
If it wants to just read for the tabs that start with the asked for or current YYYYMM that's fine with me. That way I don't have to input a number.
Sheets("Sheet2").Range("H1") = TextBox3.Value
it works but the code needs to copy special value&number format not just copy
even better can the text box itself be formated to 00"/"00"/"0000
how do i copy one column to another one (with formula) that not repeat any number?
i have a list of prices and i need that list in other column with any price repeated.... and theses prices are imported data, so they change, thats way need to be formula =/
my excel file have 5 sheets (may be more than 4) ,sheet 1,2,3,4... and the sheet name (all serch data) .
in sheet 1 ,sheet 2, sheet3,sheet4..... incell a3 is the number for reference . in sheet (all sech data ). i create the macro button and the range (n) of this sheet ,when i key the reference number to the sheet1-sheet4 .
if ,it is the same number to the sheet 1-sheet 4. it will copy the data of that sheets paste to the sheet (all sech data ). if it found the same reference number.
i attach with the file to see ,how can i do for macro copy code?
I have a situation where I want to copy the first 6 rows of data in a worksheet down 11000 times and right below the previous. I can get it to copy down, but I can't keep the formatting the same, and the formatting is important for when I print. After I get this to copy down the values and format, I'll be inserting pagebreaks every 6th line.
I have the following code right now:
Sub PasteDownFormat()
Dim x As Long, i As Long
x = 11000
If x < 1 Then Exit Sub
With Range("a1:l6")
For i = 1 To x
Cells(i * 6 + 1, 1).Resize(.Rows.Count, .Columns.Count).Value = .Value
Next
End With
End Sub
I have created a userform with 4 textboxes and "ok" button. whenever I press OK I want it to copy TB1(text),TB2(number) and TB3(number) in the first empty row a number of times based on what is in TB4(number). however, each time it has to add 1 to TB2 and whenever (TB2+1) exceeds 5 then 1 is added to TB3 and TB2 start over from 1 again.
View 3 Replies View RelatedI have a task which I am sure can be done quite simply. I have a list of names in column A and a number in column B. I want a Macro to copy the name in column c, d, e etc for the number in column b.
View 9 Replies View RelatedAdd Worksheet Named As Cell. Number Sequence
how would I set it up so that it copies the page not just creating a blank page.
Using VBA, I'd like to copy the formulas down from the first row of one sheet to the same number of rows that are used in a second sheet. For example, if 100 rows are filled in column A of sheet1, I want to copy the formulas in row 1 of sheet2 to rows 2-99 of sheet2.
View 3 Replies View RelatedI am not good at writing codes and so would really appreciate if someone could help me.
I have a range suppose A1:D50 which i want to copy it certain no.of times, say around 50 times below the original range or in another sheet.
Can a code be created where I have a useform , where I will be entering the number for eg.50, which will copy the range 50 times below the original range or in new sheet.
In the code below I am trying to scan a column and copy the values -.03 and lower OR 0.3 and greater. I selected a case to do nothing if the value is within the range of -0.2 To 0.2 but this configuration will still copy over -0.2 and 0.2 values along with the ones outside this range. I tried using -0.3 To 0.3 but that skipped the 0.3 values.
Is the negative throwing this off? The code works perfectly, it just brings the twos with it.
Sub TempCase()
Dim colSearch As Range
Dim celVal As Range
Dim celRow As Range
Sheets("Sheet3").Range("A1").Copy Destination:=Sheets("Sheet2").Range("A65536").End(xlUp).Offset(1, 0)
With Sheets("Sheet3")
Set colSearch = Intersect(.Range("C:C"), .UsedRange)
End With
For Each celVal In colSearch
Select Case celVal.Value
Case -0.2 To 0.2
Case Else
Set celRow = Union(celVal.Offset(0, 1), celVal.Offset(0, 2), celVal)
celRow.Copy Destination:=Sheets("Sheet2").Range("A65536").End(xlUp).Offset(1, 0)
End Select
Next celVal
End Sub
I have this statement
Range("J4:J367").Select
Selection.Copy
In X1, I have 400 and wish to use this cell value as a varible in the copy range statement. This would make the new Range("J4:J400)
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.
View 2 Replies View RelatedBasically, I have a list of data in columns B,C,D, and an ascending number in column A. Three cells in G10,H10 and I10 can now be copied over to B,C,D no matter long the list (see post underneath) however I need it to simultaneous add an ascending number to column A once the macro is run.
Attached workbook shows two example situations in sheet 1 and 2, and a completed form in sheet 3(based on sheet 2 example).
My worksheet has data in column A. A formula is placed in cell B2 (col headers are in the first row). What is the code to copy it down so it coincides with the rows in Column A? If I use the following:
View 6 Replies View RelatedI have two worksheets. First one is TchNfo. Next is WrkMnShp. TchNfo has a range from A2:A93 with info in columns A,B,C,D, & E.
Is there a macro that I can run where if I enter a number in WrkMnShp column A, the entire row that matches the number in TchNfo is copied to WrkMnShp?
1) This spreadsheet has 7 main sheets, UK, IBE, FIN, BENE, FRA.
2) Each main sheet has 8 sub sheets i.e UK CAT A to H, IBE CAT A to H etc.
3) col BO on the main sheets will have CAT A,B to H and can contain some other text but i'm only concerned about the CAT. Also Cat may be wrote CAT, cat or Cat etc
At the moment i'm using a loop, I had some code from another thread yesterday but this code creates new sheets if it can not find a sheet named the same
I will need to run this as 1 i.e all 7 together or 1 at a time.
I am trying to create a macro to fill Sheet1 cells A1 through P1 down, and I would like it to be filled down based on the number in Sheet2 cell R1.
View 4 Replies View RelatedCode:
Sub Copy_and_Layout()
Dim ws As Worksheet
ThisWorkbook.Activate
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If Left(ws.Name, 5) = "Sheet" Then
Range("B2:G" & ws.UsedRange.Rows.count).Copy
Sheets("Rev New").Range("B1").Insert xlDown
End If
Next ws
End Sub
So far I have this as a code but it seems to only paste the last sheet at the top ....
I need to create a variable for the number of rows in a copied range.
The user will copy a range from an external workbook could be any number of rows.
On the target workbook I will be using a User defined Menu button to fire the paste.
I need to know how to count the number of rows that are in the the range that has been copied.
My data looks like this in one sheet:
A
2
B
C
D
1
E
F
3
G
H
I
Where A is associated with 2 other letters, B and C. D is associated with one other letter, E, and F is associated with 3 other letters. I want an automated way to paste this into 2 columns in a new sheet, like this:
A
B
A
C
D
E
F
G
F
H
F
A
2
B
C
D
1
E
F
3
G
H
I
a1=aaa
a2=111
a3=222
a4=333
a5=bbb
a6=444
a7=555
a8=ccc
a9=909
a10=234
if a1 = aaa then copy a1 to b1 until the cell =bbb
if a5= bbb then copy a5 to c1 until the cell =ccc
if a8= ccc then copy a8 to d1 until the cell = ddd.........
I have formulas in cells B8:F8. I need to copy these formulas down based on the number of rows in column A that has data. The data in column A will vary based on user input.
View 2 Replies View Related
