Basically, I have a list of data in columns B,C,D, and an ascending number in column A. Three cells in G10,H10 and I10 can now be copied over to B,C,D no matter long the list (see post underneath) however I need it to simultaneous add an ascending number to column A once the macro is run.
Attached workbook shows two example situations in sheet 1 and 2, and a completed form in sheet 3(based on sheet 2 example).
I am trying to do 2 things involving data validation. 1) Count the number of entries in a data validation dropdown list and display a result. 2) Use an If statement to pull the formatting from a cell into another cell.
An example would be if Cell A1="A", then show the drop down list associated with cell or sheet "!ryanB2". Alternatively, I would like to also display the number of entries in the drop down list.
I have a sheet which details specific card numbers in Column A, and the date and place of transaction in the Column B. This very long list contains multiple entries for each card number. What I would like to do is use Sheet2 to list each card number and the number of times it appears in the list.
View 4 Replies View RelatedI want to count the number of times any given number appears either as a consecutive group or singularly.
To give you a context I monitor windturbines and for any given fault code I wish to count the number of events it occurs in a month. Now it could be for 1 hour then clear the next then back for 17 then claer again. That would be 2 events!
NB the data is in seperate coulumns per turbine.
I am building a tracking list for several items and have categorized them
Software
Hardware
Networking
I will have several of these and the list keeps getting bigger. I have a table above the list that summarizes these catergories and the count of them. How can I count each categorie and so that it updates each time I add one.
The formula would have to sumproduct or determine what categories are there and how many (unique list) and update when I add one.
Currently its a manual process of creating a unique list and doing a countif.
I've in a sheet something like this:
A B
Number Item
2 Apples
1 Orange
2 PineApple
5 Orange
1 Apple
I need to do a code to get how many Apples Orange, PinneApple or somethig is in the range
For Example:
3 Apples
6 Orange
1 PinneApple
The items are variable. It's starts in the second row, and finish in the next blank row.
I have found ways to count cells but what I am trying to do is in column F I have a list of meeting topics, and sometimes these repeat in a year. in my drop down menu I have all of them listed however my supervisor wants me to add a count after the meeting number in the 1_1X format where x is the number of times a topic has been used.
The output will be added to my macro here
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
Dim y As String
Dim z As String
Dim b as Integer
If Target.Cells.Count > 1 Then Exit Sub
If Intersect(Target, Range("MEETINGNUMBER")) Is Nothing Then Exit Sub
[Code] .......
Any way to copy cells from a list of employees. I have already shortened the list significantly, which is based on the location... from over 700 employees down to a possible 30 rows. Now, I want to be able to copy the exact number of employees to an employees list in my form.
Say the list is from A7 to A36, but one time the location may only have 4 employees and the next time there may be 7 employees or whatever. I tried copying the entire list and pasting the list as values, but it pastes the empty cells as duplicates - conditional formatting is on to show if a name was manually entered twice in the list.
I have a cell showing the number of employees in the location, but I'm not sure of the code to dynamically copy from cell A7:A# based on the employee count. So, I'm always going to start in A7, but the end may change. I thought about using End(xlUp), but it stops at the last formula and I tried searching the internet for the right words, but I have had no luck.
My problem is , I have a date range 21-Feb-2013 till 07-Mar-2013 (Col C2, Col D2 respectively) which is holiday list for a person.
I am trying to pull out the number of working days for that person in the month of Feb which should exclude weekends.
To get the total no. of working days for the month of Feb, I have used the below formula.
=NETWORKDAYS(DATE(YEAR(C2),MONTH(C2),1),EOMONTH(C2,0))
This gives me a value of 20 which is correct.
Now I need to find no. of days which fall under the month of FEB from the date range 21-Feb-2013 till 07-Mar-2013 (Col C2, Col D2) which are working days. so that I can subtract that from no. of working days for that month (FEB) to get the no. of working days which the person has actually worked.
I need to count the unique values in a list based on another value. i.e.
AB ___ Jones
AB ___ Smith
BC ___ Henry
AB ___ Jones
BC ___ Brown
BC ___ Henry
AB ___ Tomkins
For all the AB's in column 1, I need a formula that will give me all the unique names from column 2, in this case 3. I've tried adapting:
=IF(LEN(June!D5:D100),SUMPRODUCT(1/COUNTIF(June!D5:D100,June!D5:D100)))
but haven't been able to get it to work.
I have a filtered list and want to count the number of times each value appears in the filtered list. I also have other hidden rows that I do not want to include in the count and the filtered rows should not be included in the count either. I have tried countif, pivot tables and subtotal .
View 9 Replies View RelatedI need to create a variable for the number of rows in a copied range.
The user will copy a range from an external workbook could be any number of rows.
On the target workbook I will be using a User defined Menu button to fire the paste.
I need to know how to count the number of rows that are in the the range that has been copied.
I have a list of names in column A, don't know how many different names but for sure some of them repeats in different cells of column A.
A1 = NAME_1
A2 = Alan
A3 = Ben
A4 = John
A5 = Alan
A6 = Kevin
A7 = Mark
A8 = Dominic
A9 = John
A10= Tom
A11=Alan
A12=Frank
How can I make aonther list in column B, which contains a list of name in column A without repeating. So that B1 = NAME_2, B2:B4 is exactly like A2:A4, then B5 = Kevin, B6 = Mark, B7 = Dominic, B8 = Tom, B9 = Frank.... and so on. Another question, which is very similar to the previous one. In the same column A, now I add an AutoFilter (Data > Filter > AutoFilter) in A1. A drop down arrow button will appear at the right side within A1. Click the down arrow and another box shows: Sort Ascending, Sort Descending, All, Top 10, Custom, Alan, Ben.... the rest of the data in Column A but each unique data will only shows once in that list. How can I copy the contents of that box?
I have been using the sumproduct formula to count how many times a certain piece of data appears...which works fine...for text purposes such as names, initials etc...
I now need to amend the formula to count how many times a date appears in a range of dates.
I know when you use the sumproduct...dates must be input and formatted as text.
example
A1
01-Jan
02-Jan
5-Feb
7-Feb
12-Feb
formula to only count dates with feb in?
I am desperately in need of a macro that will count the number of items in column A of each worksheet and then summarize the results next to the names of the worksheets (i.e. in two adjacent columns) on Sheet 1 of the book. Obviously, Sheet 1 needs to be ignored by the macro.
View 3 Replies View Relatedi need some formula, how to count data with 2 criteria: 1. data is visible cell only and; 2. data is ignore zero number/blank...
i have using subtotal but not fully work....
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
Original
01012014 DAVE JOHN
02012014 MAT
03012014 CHRIS MIKE PHIL
What I want
01012014 DAVE
01012014 JOHN
02012014 MAT
03012014 CHRIS
03012014 MIKE
03012014 PHIL
I'm not sure if using the Dcount formula is the right one in my example below, but I can't get it to work. Here is my data:
A
B
C
D
E
F
G
H
1
ThrFriSatSunMon TueWedThr2
2030101512
I'm looking for a formula that would count the number of Weekdays with data in it. So the answer would be 3. As I enter data into column F, G, H, etc. the count would go up and would always skip "Sat" and "Sun".
For reference, I’ve attached a sample spreadsheet. I’m trying to find a way to calculate the max number of blank cells between a range of cells. As an example, in row two of my data, the result would be 3 using the range of F2:N2. Can this be done without the use of VB?
View 3 Replies View RelatedI am using Excel 2010. I need to copy a list from any Column on the right to the existing Column. See the sample file.
View 10 Replies View RelatedWe have folders of daily cash collections stored in such a manner, yearmonth. In every month, we will have worksheets sent by the end user to the finance dept, naming it using mmdd. (The folder in the drive will reads: C:Daily Cash Collection2013), (C:Daily Cash Collection2013 0104.xlxs), (C:Daily Cash Collection2013 0115.xlxs). I intend to put the master list outside the year folder, meaning, in the Daily Cash Collection folder (C:Daily Cash CollectionDCC_2013.xlsm). When I have a new folder for year 2014, my master list will be here (C:Daily Cash CollectionDCC_2014.xlsm)
I am looking to automate this opening of all the daily worksheets, select all data except the header row, and copy it into a master list (which will be data for the whole year, with 3 months of the previous year data).
The data in the daily sheets, it will have collections of the same Debit Note number from the file sent earlier. Meaning, if the file was sent on 0104, there is a DN0114-0002, collection of $50. In another daily sheets 0115, it will also have a collection of DN0114-0002 of $20. This 2nd information of $20 will also need to be captured as the payment in 0301 is partial and incomplete.
I will need to copy the daily sheets into the master list every now and then. Is there a way to check and copy the daily sheets and not repeating it and missed out one?
In another words, if I had already copied Jan sheets into the master list, will it look for the next worksheet that I had not copy and copy according the DN number? (it will be in running number but sometimes will have DN of the previous month due to the partial payment ealier).
Alternatively, if this is too complicated, how to insert a macro to copy all cells except the header (will be in fixed column and the first row will be fixed) from an open daily sheet, find the last row in the master list and copy it to the master list, and after copying, unclear the selection of the daily sheet and close the daily? Where can I put this macro as the daily sheet is from the end user. I can only put it into my master list, but my problem is, the file name of the daily sheet is not fixed, it depends on the day the end user saved and email the data to Finance Dept.
DCC foler.jpg
I am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I have a range of 30 cells in a row. From that row there are groups of cells that have data that might be 1-7 cells populated in a row and in between these groups are blank cells in the row. I need to see what is the highest number of cells in a continuous row that contain data, what the mode is for continuous cell counts, and what is the average value for the data from the continuous cells. The average is a nice to have but not entirely necessary as most cell data will be fairly similar and I can get a close enough average just by knowing the average number of cells that contain data in a row. I have to do this calculation for about 1000 rows of individual data so its important a formula fit in one row.
Almost need a count function to count starting with each cell and then stopping at the first no no value it finds. Then it would show those counts and I could run a formula to pick the highest count and also show the mode of counts.
I will let the experts at it!, my weak mind could not think this one through. I thought something to do with MATCH for a while but no go from what I could do.
in creating a Macro which copy and paste the data from "Sample2.xlsx" file to "Sample.xlsx" file after row count in each column. Macro should not overwrite any previous data present in workbook.
Note: Sample2 workbook is containing a Variable Columns. Macro should match the headings of the Column in both workbooks and then copy and paste the data after row count.
I have a list that I choose a certain percent of each color:
Then I would like these to be put below in order starting at Cell A68, by using a formula or if I need to use VBA, that is fine.
Actually I would like to CONCATENATE from the list above. To combine B25 and E25. It has to keep the % sign though. So maybe a copy and paste values using VBA code would be best.
Here is what I could like:
10% CF2 MED GREY
20% CF8 TAN
etc.etc.
In my sample I have only 4 colors and percentages selected. There maybe as many as 10 colors picked. So A68 on down is fine to have them listed.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedI want excel to copy some data fram 5 defined colums into the first empty row in a list. The problem is decribed better in the attached dummybook.
View 2 Replies View RelatedI have a grade book with 17 worksheets 1 for each subject = each of the sheets are identical with the students names in col B and the data is entered manually in the corresponding cols along side the names.
What I would like is a vba solution to enter the data in a worksheet called 'datainput' = which would be identical in layout as the above subject sheets= and by the use of a drop down list with the names of the 17 subject sheets = copy the data in the 'datatinput' worksheet into the next available blank col in the worksheet selected from the drop down list=and with a command button erase the data in the 'datainput' worksheet ready to enter new data.