I have two columns. The first is imported NAMES, ADDRESSES, AND CSZ on three lines, repeating over and over again. Several hundred names, addresses, csz. The SECOND column is a formula which picks up ONLY the text name in the first column. The SECOND column will just be one NAME after another, so the formulas will SKIP two rows in the first column. HOW do I copy down / propagate relative formulas to do this
View 4 RepliesI've found a few macros that will automate changing cell references from absolute to relative and they work great. However, when I run the macros on formulas that have references to another worksheet or workbook, the macro will not work correctly.
View 9 Replies View RelatedI have a Formula = SUMIF('Master List'!B3:B190,AE197,'Master List'!AG3:AG190)
When I copy this formula the next line is as Follows =SUMIF('Master List'!B4:B191,AE197,'Master List'!AG4:AG191) Is there something I can do to in order to make so that when I copy the formula is would read =SUMIF('Master List'!B3:B190,AE198,'Master List'!AG3:AG190). Elliott Auto Merged Post;Nevermind I used the formula = SUMIF('Master List'!$B$3:$B$190,AE197,'Master List'!$AG$3:$AG$190)
Formula: B2+C2
In columnD I want to reference the "formula" and have it calculate based on the values in whatever row references the formula.
As it stands I can only get the formula to calculate within the same row.
I set up formulas to count text characters in a range of cells. I'm tracking attendance and payments for a small yoga studio.
All I need to do is count "Y"s for prepaid attendance and "DI"s for drop-ins. I have the formulas working but they are absolute so inserting a row will break my sheet.
=COUNTIF(E14:Z14,"*Y*")
=COUNTIF(E11:Z11,"*DI*")
I have a problem with attached workbook, I downloaded from this forum,its what I need but problem is that I don't know much about macro & vba.The formula works fine when I make a single letter worksheet but when I enter a name it doesn't.
View 2 Replies View RelatedI'd like to be able to create a copy of a worksheet and maintain the relative hyperlinks within each worksheet. Currently, when I copy a worksheet, the hyperlink takes me back to the original worksheet.
I'm using Excel 2003.
The code is supposed to find HEQL in column G in BOOKED.XLS ( attached) and then do a series of copy pastes into two other workbooks. For some reason, it is only finding one instance of HEQL and there should be 255.
Sub COF1()
Dim lastrow As Long
Dim x As Long
Windows("COF_OUPUT.xls").Activate
Worksheets("Sheet1"). Range("B:B").NumberFormat = "0.0000000000000000"
Windows("BOOKED.xls").Activate
Range("A65536") = "100"
Range("A65536").Copy
Range("F2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlDivide, SkipBlanks _
:=False, Transpose:=False
Range("A65536").ClearContents
Range("A1").Select .....................
I have the following code which Clears the content of a cell. The next thing I want to have happen is to have another cell equal a formula but make that formula relative to its place. The formula is the following =IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))
I am not sure how to paste it where the row changes depending on where it is pasted. Here is the code that does not work...
Private Sub CommandButton1_Click()
Worksheets("2008 Log").Select
Dim cRow
cRow = ActiveCell.Row '
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Cells(cRow, Range("column_duration").Column).value = "=IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))"
End Sub
As you can see, no matter where I paste it it will always refer to row "F". How can I have it refer to row "cRow"?
How to copy an array to an array of the same size without changing relative
cell references in the formulas?
eg say you call (ie insert a range name) cell A1 "firstcell", B1 "secondcell", then A2 "divisor1" and B2 "divisor2". if you put a formula in A3 which is "=A1/A2", how do you copy and paste this formula into B3 but getting the formula to reference B1/B2 rather than firstcell/divisor1, as it does by default?
View 2 Replies View Relatedhow to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies View RelatedI tried searching for code for each part of the task separately and trying to piece together multiple macros, that did something similar, but I’m not have a lot of luck, so I’ll break it down into two treads, I hope this will follow the rule of one question per post, but if I should have separated this request even farther as two treads, please let me know and I’ll be happy to comply.
I was given a spread sheet with a macro that loads data from a SQL Data base (not mine), it returns anywhere from one row to 100’s of rows data. Since it’s not my spread sheet and macro, I copied this sheet to my destination workbook. The Data loads in 7 columns starting in B4:H4, with the column headings titles: Acct#, Id#, Name, Qtr1 Totals, Qtr2 Totals, Qtr3 Totals, and Qtr4 Totals. Data cells in spreadsheet not formatted (general)
What I’m trying to do:
part 1:
I need a macro to copy the data only for columns Id# thru Qtr4 Totals (C5:H5 down thru the last row with data) to another sheet. The destination sheet range starts with rows B13:G13, with formulas below and to the right in columns H13, and J13:N13
(column I is blank).
The formulas below the range are a subtotal of the copied columns (D:G). They could be remove and totaled after they’re copied, so there's nothing below the copied range? Since I need the column totals as a subtotals, my thought was to have the row heading and formulas already on the destinations sheet and just insert a blank rows between as each row was copied?
part 2:
As each row of data is copied from the source sheet, I need the macro to copy the formulas to the right of the copied range (H13, and J13:N13) on the destination sheet down for each new row of data copied from the source sheet
I am trying to copy formulas and no matter what I do the cell only displays the result from the cell I am copying. I have tried to copy in different ways, autofill, copy and paste, paste special, and then tried rebooting, everything I know of.
View 9 Replies View RelatedIn sheet vba to copy the formulas in the last row of a dynamic (protected) worksheet to a new last row.
The formulas are currently in columns A and G.
This vba would be activated from an in sheet button.
Whenver any value is entered in say Cell A8, I want formulas in Range D8:F8 to get copied automatically to next row.i.e. to Range D9:F9
Again if any value is enterd in Cell A9 formulas in Range D9:F9 to D10:F10 and so on
I am working with an Address Worksheet where the house#, street name and street type are 3 seperate columns. I need to combine that data into one "Address1" column. I can use a Concatenate() formula to combine the data, but I need to be able to have that data output to a new column, independent of the formula.
The problem that I am having is if I try to "copy" the concatenated data to either a new column or new worksheet it only wants to copy the formulas. I don't need the formulas anymore, I need the data.
Is there a way of coppying formulas down a column but have a cell reference increase by one column for each row?
I have a lot of formulas to create and am hoping there is an easier way of doing it without editing each one
here is an example
first formula in cell D643
Code:
=IFERROR(SUM(C643+VLOOKUP(C147,RePro1,4,FALSE)),"")
next formula in cell D644
Code:
=IFERROR(SUM(C644+VLOOKUP(D147,RePro1,4,FALSE)),"")
Easiest way to copy $$ formulas down and to the right
=$A5-$B$5
I want formula...automatically when pulled down to get the same B5, but when pulled to the right to get another letter C, D, E...without manually (one by one) changing $$ or letters inside.
Ever have to create a column of formulas that are very similar? When you completed a copy / paste, were you upset to find that the cell references were changed during the paste? I would prefer that Excel leave my formula alone and simply copy the formula from the cell above or where ever without any changes. I want the ability to force Excel to perform an exact copy of the contents or formula from the cell or a range of celle to another cell or range of cells.
I came across this key usage to get an exact copy (no cell reference changes at all) of the cell directly above, Ctrl + '
Is there another key stroke entry that I can use to copy to another location without Excel messing with the formula or cell references?
starting to dabble in the VBA coding, now. I tried finding this solution...but nothing quite the same. I have a spreadsheet with a couple tabs. The main tab is a calculation worksheet that pulls in, and performs various calculations on, data from the other couple tabs. This main tab will be the only one that most of my users will see (query and other data tabs will be hidden.)
What this workbook does is calculate accruals for our consultants, at the end of every month (period.) I am trying to put in code that, when activated by a button, will copy the entire main ("Accrual Worksheet") tab as a new tab, at the end of the workbook....as a period backup to the calculations on the main tab.
I created the below
===========================================================
Private Sub CommandButton2_Click()
Dim LastSheet As Integer
Dim aSht As Worksheet
Dim Test4 As String
Dim NameXists As Long
If MsgBox("Are You Sure You Wish to Finalize? This will copy sheet, without formulas, as backup.", vbYesNo, "Update Confirm") = vbNo Then
Exit Sub
Else
=============================================================
This seems to work great......EXCEPT (you knew one was coming), I only really want to copy the sheet as data/format only. I don't want the copy tab to have any VBA code, or formulas, on it. I just want a picture image of the "Accrual Worksheet", as reference to the activity for that period. In the following period, the same "Accrual Worksheet" will be used to work on the next month's activities.....and the data on that tab will change. So we need to store the final calculation, for further reference.
I am giving below a sample data wherein I am trying to copy only the formulas of A4 and A9 to B4 and B9, C4 to C9 etc. across columns. But I don't want to copy the data.
Sheet1 *ABC11**21**31**43005***62**72**82**9600Spreadsheet FormulasCellFormulaA4=SUM(A1:A3)B4=SUM(B1:B3)C4=SUM(C1:C3)A9=SUM(A6:A8)B9=SUM(B6:B8)C9=SUM(C6:C8) Excel tables to the web >> Excel Jeanie HTML 4
I have setup a forecast model and now find it necessary to update many formulas
I have set period 1 formulas correctly and would like to copy through periods 2-12. However each period has already been populated with data that need to remain intact in this process
For example,
I have formulas to copy at I5 and I9. I6,7,8 should be skipped
These formulas should be pasted to K5 and K9 respectively, while leaving K6,7,8 intact
This is of course a simple example, the column contains 15 formulas to be copy/paste
I have a dynamic range that is 19 columns wide with the height defined by the last filled cell in Column B.
Columns A, O, P, Q, and R contain formulas that need to be autofilled every time a new record is added to the list (i.e. a new row is added to the range) - this seems like it should be so simple, but I can't seem to find out how to do it?
Some extra details in case they are needed -
- Column B will always contain data for every row that I need A, O, P, Q and R to have their respective formulas copied into
- I'd like the formulas to appear as soon as the data goes into Column B - regardless of what else is entered into the row
- Multiple identical records will sometimes be entered at the same time (i.e. by highlighting multiple rows and using Ctrl-Enter) - I need the formulas to autofill all of the affected rows.
Greetings Wizards of Oz! I have a workbook with financial data on two sheets in columns A - G on each sheet and formulas in columns H through P on both sheets which compares the data on the two sheets. What I would like is for the formulas to autofill down the same number of rows as there is data on each sheet. I currently have the formulas copying down 500 rows using the following macro but I'd like to do it properly.
Sub Copy_Formulas_Down()
Sheets("TCRdata").Select
Range("H2").Select
Range(Selection, Selection.End(xlToRight)).Select
Application.CutCopyMode = False
Selection.Copy
Range("H2:P500").Select
ActiveSheet.Paste
Range("H2").Select
End Sub
I experimented using FillDown from something I found in another post and modified it successfully - or so I thought - this script runs fine on one sheet but not the other. I get "Selection too big" when I run it on the second sheet. I think it has something to do with excel "remembering" that at one time I had data in all 65536 rows but I don't know what to do about it.
Sub Copy_Formulas_Down()
Range("H2").Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, ActiveCell.Offset(0, -1).End(xlDown).Offset(0, 1)).FillDown
Range("H2").Select
End Sub.......................
I'm working with a 100 worksheet workbook and am looking for a way to quickly copy formulas from the first worksheet I modify to some of the other worksheets (not all - every other one, actually). If the cells are A1, B1,A2,B2; I need to copy the formulas from B1,A2&B2. I can do this in 2 steps currently - copy & paste B1 and then copy and paste A2:B2.
View 2 Replies View RelatedI have a formula that references data on another spreadsheet with multiple worksheets. I have a new worksheet for each month (Jan, Feb, Mar, ...).
How can I copy formulas in series that keep the cell references the same, but change to the appropriate month. So for the forumula below, I want to fill a series down in a column to represent each month.
Right now I have to go in and edit it to change the month to the next month (i.e. change Jan to Feb.)
An example of the formula is below. In this case, I would want to fill the series down a column and have the months update in series but keep the cell reference the same.
=SUM('[New 2008 sales report linked.xls]Jan'!$M$19,'[New 2008 sales report linked.xls]Jan'!$N$19,'[New 2008 sales report linked.xls]Jan'!$Q$19,'[New 2008 sales report linked.xls]Jan'!$L$47,'[New 2008 sales report linked.xls]Jan'!$K$47,'[New 2008 sales report linked.xls]Jan'!$S$47)
I have this code:
[Code] .....
I want only values to be copied, not formulas.
Im looking for code to add new rows and copy the formulas only (not values) into the cells A, B, C, D and F. I have found code that does this in various places online but in every case I have found they duplicate the row then remove the values (so the formulas are left behind). The issue I have however is that it triggers some change event code I have on the sheet which interrupts the process.
Is it not possible to simply insert a new blank row, then copy down the formulas only without values?