Find All Occurrences Of Value & Copy Relative Cells
Sep 22, 2007
The code is supposed to find HEQL in column G in BOOKED.XLS ( attached) and then do a series of copy pastes into two other workbooks. For some reason, it is only finding one instance of HEQL and there should be 255.
Sub COF1()
Dim lastrow As Long
Dim x As Long
Windows("COF_OUPUT.xls").Activate
Worksheets("Sheet1"). Range("B:B").NumberFormat = "0.0000000000000000"
Windows("BOOKED.xls").Activate
Range("A65536") = "100"
Range("A65536").Copy
Range("F2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlDivide, SkipBlanks _
:=False, Transpose:=False
Range("A65536").ClearContents
Range("A1").Select .....................
View 9 Replies
ADVERTISEMENT
Dec 20, 2013
In column A I have a set of Ids that are not unique. In column B I have a set of latlong values for those Ids in column A. In column D I have the unique list of Ids from column A(Removed duplicates from column A & pasted them in column D). In column E, I need the latlong value which has highest frequency for each Id. I tried countif,Frequency and tried mixing them up with various other formulas but it is out of my reach.
View 3 Replies
View Related
Feb 25, 2014
I'm using a macro for searching through ~200k rows of a column, finding all the occurrences of a string and copying them to another column.
This is the code (copied from somewhere some time ago, modified as needed) :
[Code] .....
It works great but it takes a little less than 20 seconds to complete the task.
And, since I have to search for multiple strings and the results need to be copied to different rows, I use multiple subs like this in a bigger macro.
The problem is that it got to the point where it takes 3 minutes to execute that bigger macro and I'm trying to find a way to speed things up.
View 5 Replies
View Related
Aug 16, 2007
I have created (pieced) together a macro to search through a list and paste the results in another worksheet it works fine but i can't get it to loop through the list.
Sub Findall()
Dim y As Long
Dim starta As String
Dim tr As Long, tc As Long
Dim sr As Long, sc As Long
Dim s As Worksheet, t As Worksheet
Dim SourceCell As Range
'Setup
Application. ScreenUpdating = False
Set t = Sheets("Target Sheet")
Set s = Sheets("Search sheet")
Set SourceCell = ActiveCell
Do While IsEmpty(ActiveCell) = False
Counter = 1
'Get last used row in Target Sheet
t.Select..........................
View 6 Replies
View Related
Dec 3, 2007
how to write a vb code to do the following actions with an excel sheet, which contains a dump from SAP. This dump usually consists of anywhere between 25 to 30 columns and about 20000 to 30000 rows…
1. Find all rows which contain “VN” and place it into the sheet Vendor Charges (which already exists). Which could be in any column
2.Find all rows which contain “MT” and place it into the sheet Material Charges (which already exists).
I have attached the excel sheet to better explain what I had in mind. ‘sheet1’ contains the raw data from SAP but, the number of columns varies every time so it cannot be directly sorted by selecting the column. I tried recording a macro but, as I don’t have a constant sheet to work with each time the macro obviously doesn’t work.
View 4 Replies
View Related
Feb 5, 2014
I am currently working on a project where i am given a sheet that typically has several hundred rows of data and not seemingly organized in any manner. This document has 6 columns, and my main focus is a range of dates (in MMM-YYYY form) from around early 2000 to now that can have duplicates. The dates(Column C), have corresponding Usages (Column D), and Costs (Column F) and I need to add these values together and remove the duplicate months so I only have one Usage and one cost Per month.
My spreadsheet has 6 Columns of data, and varying number of rows. Currently, since I receive the numbers in an unorganized fashion, my macro organizes the data into a table and then sorts the table be date so I have the oldest dates first and the duplicates are adjacent. There may be varying numbers of duplicates, though typically 0 to 4.
View 4 Replies
View Related
Jan 24, 2014
I'd like to search for a specific value like (1) in an array of cells like (A:A). The result needs to be the average number of a different column (B:B) in the same row as the searched value (1). And the resulting number should be rounded up to the nearest 10.
Example below: (Find value = 1 in A:A) ... 1 is found 4 times.
A | B
1 | 295
3 | 123
1 | 400
5 | 425
1 | 354
1 | 400
In the example above there are 4 (1's) found. By adding all the values in column (B) of the same row, we get 295+400+354+400 = 1449, dividing that in 4, the average is 362.25, rounding that up to the nearest 10... THE RESULT I'M LOOKING FOR IS: 370
View 6 Replies
View Related
Sep 29, 2007
I've got the code to change all the relevant cells, but cannot get it to stop looping. The data is a converted text to Excel document, so cannot filter on it.
Sub FindIt()
Dim rngFound As Range
Dim n As Range
Dim o As Range
Dim ProjName As String
ProjName = 0
With Selection.Columns("D:D").Activate
Do
Set rngFound = Cells. Find(what:="Do Not Use", after:=ActiveCell, LookIn:=xlValues, _
lookat:=xlPart, searchorder:=xlByColumns, searchdirection:=xlNext, _
MatchCase:=False) .....................
View 9 Replies
View Related
Dec 18, 2006
I want to find a string Variables via Find Method . Once this string is found, it will output the offset cell string. For example, in the attached file. i would want to find the string "ggg", once found the code will output the string "xxx"
I tried using the below code but it didn;t seem to work.
If Cells.Find(What:="ggg", After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False).Activate Then
File_array(1,1,1) = Cells.Offset(0, -3)
End If
Msgbox(File_array(1,1,1))
View 6 Replies
View Related
Dec 18, 2013
I'm trying to use a VLOOKUP formula in a blank cell on a separate sheet from my data.
Essentially I'm trying to search the sheet for the word "VIOLATION" and then report back what it says in field 1, which in this case is a date.
=VLOOKUP("VIOLATION",'Master sheet'!1:1048576,1,FALSE)
Right now I just get #N/A.
Eventually I would like to be able to find all occurences of the word VIOLATION and then have the dates all show up in one cell together seperated by commas if that's possible.
View 14 Replies
View Related
Sep 21, 2012
I have a very large range of text; g2:g23000. I am trying to find the number of times ABC shows up in this range and provide a count. The cells contain all bits of information, but i am only looking for ABC.
View 9 Replies
View Related
Jun 7, 2007
i've got two textboxes and a command button on a userform.
Textbox1's value is "A" Textbox2's value is "B".
On commandbutton_click, i'd like to search down column P for textbox1's value.
then offset -5 to column J and insert textbox2's value.
Then Next search for the next textbox1's value and replace the offset again until all values have been replaced.
I've done the searches and not sure exactly how to go about it, it seems so easy but i'm getting tired of looking at this project.
View 8 Replies
View Related
Aug 28, 2009
I am trying to correct a problem in a database where some of the formulas contain an error. It's a simple enough fix -
View 4 Replies
View Related
Jul 28, 2009
I am working with data that is to be used for a regression analysis, and I am having trouble being able to find and replace multiple observations.
For example, column A has the two-letter abbreviation for each country in the world. Column B has the name of the corresponding country. At various places throughout the worksheet, names of countries exist.
I would like to find all instances of say "Albania" and replace them with "AL" then Algeria, Angola, Andorra, etc. Since columns A & B are in alphabetical order and the abbreviation and name correspond with one another, I would like to use a macro that will find all occurrences of the country name in the selected cell and replace them with the abbreviation then repeat the operation.
So, I need to:
1) Find all occurrences of the content in "B1"
2) Replace them with the content in "A1"
3) Repeat operation beginning at "B2"
View 2 Replies
View Related
Feb 3, 2014
I would like to design a macro that can find a value within a cell in a colunm and copy a value in the row then count occurances of that value next time a match in the colunm is found on a different row, but also do this only if the date range in the row is within a specified range. So a multi-critieria search and copy operation.
To explain a little better here is a simplified example of my spread sheet that is in input for the macro.
A
B
C
D
E
1
PART NO.
date in
date out
comp1
comp2[code]......
Column A lists the coponents found on the same row as the seach critria, in this example "12-3".
Column B lists the number of occurances of the components. This search is limited to a date range input by the user.
So what I can see is the components replaced and the amount of times replaced on a specific item over a fixed time.
*It is difficult to describe this problem without showing the macro output, but this is just an example for the purpose of explanation.
I know a bit of VBA programming and initially I started with an input box that asks for the part number and limit dates.
View 2 Replies
View Related
Sep 20, 2007
I want to find the subtotal amount on one worksheet, which is two columns over from the text, "Sub Total:" on the same row. The subtotal line floats up and down each week. Once I can find the subtotal I want to populate another worksheet with the data.
View 5 Replies
View Related
Sep 27, 2007
I want to set range a entire column,the rows are dynamic and i want to do it on all the columns in the sheet, my problem is that after i set the range(i hope i did good) i want to do a average of the range and to put the result in a new sheet on a row. I'm sorry for the mess in the code its one of my first macros
Option Explicit
Sub Average()
Dim R As Integer
Dim help As String
Dim Range1 As Range
Dim E As Integer
Dim Avg As Integer
R = 1
'/////CREATE NEW SHEET AND COPY THE FIRST TWO ROWS TO THE NEW ONE
Sheets("UXP data").Select
'Sheets.Add
Sheets("UXP data").Select......................
View 2 Replies
View Related
Feb 14, 2010
I have two columns. The first is imported NAMES, ADDRESSES, AND CSZ on three lines, repeating over and over again. Several hundred names, addresses, csz. The SECOND column is a formula which picks up ONLY the text name in the first column. The SECOND column will just be one NAME after another, so the formulas will SKIP two rows in the first column. HOW do I copy down / propagate relative formulas to do this
View 4 Replies
View Related
Mar 31, 2014
I have a problem with attached workbook, I downloaded from this forum,its what I need but problem is that I don't know much about macro & vba.The formula works fine when I make a single letter worksheet but when I enter a name it doesn't.
View 2 Replies
View Related
Nov 4, 2008
I'd like to be able to create a copy of a worksheet and maintain the relative hyperlinks within each worksheet. Currently, when I copy a worksheet, the hyperlink takes me back to the original worksheet.
I'm using Excel 2003.
View 9 Replies
View Related
Mar 5, 2008
I have the following code which Clears the content of a cell. The next thing I want to have happen is to have another cell equal a formula but make that formula relative to its place. The formula is the following =IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))
I am not sure how to paste it where the row changes depending on where it is pasted. Here is the code that does not work...
Private Sub CommandButton1_Click()
Worksheets("2008 Log").Select
Dim cRow
cRow = ActiveCell.Row '
Cells(cRow, Range("Column_Type_Of_Ride").Column).ClearContents
Cells(cRow, Range("column_duration").Column).value = "=IF(ISERROR(VLOOKUP(F56,Routes_All,2,0)),0,VLOOKUP(F56,Routes_All,2,0))"
End Sub
As you can see, no matter where I paste it it will always refer to row "F". How can I have it refer to row "cRow"?
View 2 Replies
View Related
Jan 14, 2008
Im currently making a macro that vlookups similar information from one sheet into the other but i was wondering if there was a way to create a vb code for the macro that would allow it note cells that have come up as '#N/A' and paste that cell and an accompanying cell into a separate section of the sheet?
View 2 Replies
View Related
Jun 19, 2006
How to copy an array to an array of the same size without changing relative
cell references in the formulas?
View 12 Replies
View Related
Jul 20, 2006
eg say you call (ie insert a range name) cell A1 "firstcell", B1 "secondcell", then A2 "divisor1" and B2 "divisor2". if you put a formula in A3 which is "=A1/A2", how do you copy and paste this formula into B3 but getting the formula to reference B1/B2 rather than firstcell/divisor1, as it does by default?
View 2 Replies
View Related
May 26, 2008
In my data validation I have the following formula as the Source: =INDIRECT(SUBSTITUTE($F$2," ","_")). I want to be able to copy the cell and paste it into another cell and have the formula update to reference the new cell. Currently the validation is for cell G2 and references F2. I want to be able to copy G2 and paste it in G3-G6 having the formula update so it refrences F3-F6.
View 3 Replies
View Related
Mar 31, 2007
Attached is a spreadsheet that has Months in column B and Number of Reviews in column C. What I'm trying to do is create code or maybe just a formula that will scan the Reviews column (col C), find the first non-zero cell, and then copy/paste that value into F4. It would then find the corresponding month that is tied to that value and place it in E4. It would then repeat this process for the rest of the months and copy/paste all the rest of the non-zero cells and their corresponding months into columns E and F. The attached shows in italics what the final product should look like.
It is important to note that the numbers in column C are not static... in some cases the first non-zero cell may be the first cell or it could be the tenth cell. In other words, it's data is dynamic.
View 4 Replies
View Related
Aug 28, 2007
I am looking for a way to perform a find, and then copy multiple cells. The code below is what I have this far:
'The code under this section opens the first file and copies the Surrogate Compound components
Dim basebook As Workbook
Dim mybook As Workbook
Dim mybook2 As Workbook
Dim sourceRange As Range
Dim destrange As Range
Dim SourceRcount As Long
Dim N As Long
Dim rnum As Long
Dim rnum2 As Long
Dim rnum3 As Long
Dim MyPath As String
Dim SaveDriveDir As String
Dim FileName1 As Variant
Dim FileName2 As Variant
Dim FileName3 As Variant
The code above will actual perform the find, and copy what is in the criteria of the search. However, I am trying to find a way to perform the search, copy the data that is in the search creteria plus data that is in another cell. The data in the other cell will always be different, so I cannot use that in a find criteria. The other data will always be found in the "E" column. I was thinking that possible there might be a way to perform the find, copy that entire row, and then just delete the columns that are not needed. However, I have been unsuccessful in my attempts.
View 9 Replies
View Related
May 8, 2008
I am attaching a sheet in which Data can be entered in cells C5 & D5 in "Calculation " sheet, depending upon the value of C5 it will count all the Occurrence of data of D5 in adjacent cell i.e. (one up & and one below of data of C5) . data will search in "PCM_PLAN" sheet in column " I ".
count will be given in E5 in "calculation sheet"
View 9 Replies
View Related
Nov 19, 2007
I have a list of about 2 million phrases. The list was created by combining two lists in all possible combinations:
a list of about 800 street names
a list of about 1000 property names
example
church street flat
church street apartment
house church street
house king's road
etc
what I would like excel to do is the following:
look at each cell and determine which of the 800 street names it contains. write that streetname into adjacent cell.
this would then leave me with the original column, where each of the 2 million cells has been assigned one of 800 streetnames.
for example:
church street flat | church street
church street apartment | church street
house church street | church street
house king's road | king's road
that's all. I think that can't be too difficult, and probably it has already been discussed here in the forum. unfortunately I did not know for which keywords to search, that is why I couldn't find the posts.
I hope somebody can help me as I need to get this sorted for work as soon as possible. All semi-automatic ways I could think of to accomplish this would take me days that I don't have.
View 9 Replies
View Related
Jun 23, 2014
I need to find a specific text in column D of sheet2 of my worksheet and copy that row to sheet1 to the last blank cell in column B. The macro should continue to search for the next text and copy rows only if there is active cells in the range column A : C of sheet2. I need a VBA code to do this.
View 5 Replies
View Related