I need to get a function that can copy some rolls in a worksheet 1 to worksheet 2 by sorting worksheet 1 according to column A of that sheet. I have attached a sample of what i intent doing for bether understanding.
View 2 RepliesI have been trying for two weeks to look for excel function that can copy specific rolls of a worksheet to a specific rolls of another worksheet. I do not know the best way to explain the problem here. I have attached an excel, sheet 1 is the original data while sheet two is a sample of how i want the new sheet to look like after applying an excel function.
View 10 Replies View RelatedWhat I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
Column A lists an account code on the summary line of each invoice. I'd like to copy this account code upwards for each individual line of the invoice so that I can summarise each type of charge by account code in a pivot table.
I'm a bit stumped as to how to do it. If possible I don't want to have to modify the data itself in any way so that I can paste new data in the each day without altering it.
I've started on the right with a CountA function for each row, which I was intending as a means to identifying the blanks rows and discount them, but it also showed up that each line requiring an account code to be copied returns a 4 and each invoice summary line returns a 9. I'm just not sure how to reflect this in a function.
I need a code that will copy the format AND formulas of the entire row that I have selected (or activatedwith my cursor) to each and every blank row - until it gets to the last row of data on this spreadsheet.Since any employee could have more than 1 row of data - I am using a code that inserts1 blank row after each NEW employee name.
NOTE: This report is initially sorted by employee name so that each occurrence is grouped together.REPORT SPECIFICS:1) This report reflects typical paryoll information.2) Certain columns have data that is either in text, general, or number ($) format3) The number of columns may vary depending on which PR report is being worked4) For the sake of simplicity - we can assume that the column titles will always be across row 15) Each employee name on this report may repeat several times depending on how many weeks they worked,so the SUM() formula should adjust automatically to capture all the rows of data to add up for each employee
HERE IS MY SPREADSHEET:
texttexttexttexttextformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 CSDINNECage Nick2581/7/1281$ 600.00 CSDINNECage Nick2581/16/12245$ 25.00 CSDINNECage Nick2581/23/12323$ 25.00 CSDINWPolly Cracker1781/7/12856$ 60.00 CSDINWPolly Cracker1781/16/12242$ 654.00 ARVIPWPolly Cracker1781/23/12322$ 2.00 ARVIPWPolly Cracker1781/28/12161$ 5.00 ARVIPWPolly Cracker1782/6/1284$ 3.00 CSDINSEDim Sum6871/7/1284$ 65.00 CSDINSEDim Sum6871/16/12126$ 5.00
HERE IS MY CODE TO INSERT 1 ROW
Sub InsertRowAtNewNameONE()Dim LR As Long, i As LongLR = Range("C" & Rows.Count).End(xlUp).RowFor i = LR To 2 Step -1If Range("C" & i).Value Range("C" & i - 1).Value Then Rows(i).InsertNext iEnd Sub
NOTE: See below: I will format and add formulas where I need on the 1st blank row that was createdand I need a code that will copy this particular row to all blank rows to the last.
recordtexttexttexttextcountformulaformulaformulaDeptDivEmployee NameEE#Period EndHrs WorkedPTOAccrd LiabilityCSDINSEWilma Wilsont4561/7/1280.5$ 100.00 CSDINSEWilma Wilsont4561/16/12121$ 200.00 2201.5$ 300.00
I am trying to find a way of copying values from cells that are linked to another workbook and paste them to another sheet in same workbook to the end of last row entry. This needs to be done via VBA from a button. There are 35 rows and 9 columns linked to another workbook and they don't always have values (depending on source workbook). To cycle thru each row and copy if they have values and paste them to end of last used row on another sheet.
View 6 Replies View RelatedI am trying to find a way to copy and paste multiple non concurrent rows of data from one spreadsheet to another.
Ex: I have a large worksheet with approx 20,000 rows of data. I need to copy
and paste every 100th row to a new worksheet.
I think this might be possible by setting up a formula and linking worksheets,
but I'm not exactly sure how to do it.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I'd like to be able to search a spreadsheet for a specific word or series of characters. Once all of the ROWS that contain the characters are found, I'd like to be able to have another spreadsheet with ONLY those rows (all columns).
View 8 Replies View Relatedi need to create a macro that will delete entire rows based on certain criteria. here is an example of some of the worksheet:
US0017651060AMR_CORP CM 12C
US0017658669AMR_CORP PR 8C
US00211H1077ATC_ONLANE_INC CM 92M
US00211H2067ATC_ONLANE_INC PR 100N
US0038813079ACACIA_RESH CM 12C
US0038812089ACACIA_RESH CM 16C
CA00440P2017ACE_AVIATION CM 7C
CA00440P1027ACE_AVIATION CM 7C
US00440P3001ACE_AVIATION CM 100S
CA00756J1049ADVANTEX_MARK CM 43C
CA00756J3029ADVANTEX_MARK PR 100N
i want to create a macro that, when searching the third column of data (containing "CM" and "PR"), if a group of rows (between blank rows) do not contain at least one "PR", delete entire group of rows.
Therefore, the rows with "ACACIA_RESH" and "ACE_AVIATION" would be deleted from the worksheet.
I need the macro to look at cells B9:B84 on the Sheet1 tab of the Cost Template. If it finds an x I need it to copy the 3 cells to the right of the x and paste them in a template. For example if it sees an x in cell B9 it would copy cells C9, D9 and E9, open the Purchase Order to the Detail tab, then paste it to cells B3, C3 and D3. It would continue looking for an x down to B84. So if it found 5 cells with x, it would give me 5 instances of the Purchase Order with 3 cells pasted into each.
I've attached my Cost Template and the Purchase Order it needs to copy to. In the Cost Template is a macro called Create_PO. This is what I was trying to alter to make this happen. I can't seem to get it right! FYI in case it matters, I had to change the Cost Template from .xltm to .xlsm in order to upload it on this site.
I'm creating a simple program that copy one or more specific cell values and place it on a specific cell in another sheet using loop to make it easier... I'm having a difficult time trying to figure it out..
Example
from sheet1 A1:A5
Sheet1
A | B | C
1 P45
2 P46
3 P47
4 P48
5 P49
and place P45, P47 and P48 on another cell, to be specific in C1,C2 and C3, in a different sheet
Sheet2
A | B | C
1 P45
2 P47
3 P48
4
I clean over 150,000 records a month, over 98% of the challenges have been resolved through this forum.
Here is the challenge
We have Columns like this
29669
January 20, 2014
January 21, 2014
January 28, 2014
January 5, 2014
34823
February 5, 2014
22015
January 3, 2014
I need a formula that can apply to all the column A and whenever the value on any cell is empty, it would copy the value of the cell above it.
the result need to look like this.
29669
January 20, 2014
29669
January 21, 2014
29669
January 28, 2014
29669
January 5, 2014
34823
February 5, 2014
22015
January 3, 2014
I would like to be able to select several non-sequential rows in a worksheet called "Data" (using a check box or just entering a value in Column A) and then be able to press a Command button to copy the selected rows to another worksheet called "Estimate" at the bottom of a table, and delete the designators in Column A (i.e. deletes the value, or unchecks the boxes) so I can repeat the process again if needed.
View 7 Replies View RelatedSay I have two worksheets, "Sheet1" and "Sheet2". Let's also say A1 in Sheet1 could have one of four values: cat, dog, rabbit, mouse. Now, based on which value cell A1 on Sheet1 is, I need different rows hidden in Sheet 2. For argument sake let's say if cat is chosen rows 1-5 are hidden, if dog, 6-10 and so on.
View 5 Replies View RelatedI have sheets named exactly the same as the entries of a listbox. Now I want excel to copy the value located in e35 in the worksheet previously chosen.
I tried th efollowing, but this doesn't seem to work. I simply recorded a macro doing what I wanted it to do (orange) but replaced the reference to the sheet with what I thought would be the choice the user made (green)
Do While continue = vbYes
UserFormware.Show
Cells(16, 4) = UserFormware.ListBox1.Text
Cells(18, 4) = UserFormware.TextBox1.Value
Sheets("UserFormware.TextBox1.Value").Select
Range("E35").Select
Selection.Copy
Sheets("Calculator").Select
Range("E35").Select
Selection.Paste
If UserFormware.ListBox1.ListIndex = -1 Then
MsgBox "You must select an item"
End If
Unload UserFormware
continue = MsgBox("Do you want to add another warehouse?", 4)
Loop
Objective: use VB to copy the first sheet (tab) from every Excel file in a specific folder to a new sheet/tab (for each) in a master spreadsheet. I will then aggregate this data into a summary table.
Following the advice of an old thread (Access: VBA combining multiple excel files to 1 new sheet), one time for each file in the folder. So with three excel files in the folder, I get 3 new tabs in my master spreadsheet but all are copies of the first tab in the master spreadsheet.
I'm wondering if maybe the code, which was in a post from 5 years ago, needs to be "modernized" for Excel 2007. Thanks for any help.
This is the code I'm using:
Sub Combine()
Fpath = "C: emp2" ' change to suit your directory
Fname = Dir(FilePth & "*.xls")
Do While Fname <> ""
Workbooks.Open Fpath & Fname
Sheets(1).Copy After:=Workbooks("Master.xlsm").Sheets(Workbooks("Master.xlsm").Sheets.Count)
Workbooks(Fname).Close SaveChanges:=False
Fname = Dir
Loop
End Sub
I am working on a project that I feel should be relatively simple but I seem to be stuck. My Goal: To add information to specific rows of data in the worksheet. I want to use a user form, and eliminate as much typing for the user as possible. I have already designed my user form, and written the code to identify the row in which I want to edit. Nonetheless, I do not know how to code the insertion of the new data. The data I want to add will be in empty cells at the end(right) of the data table.
I have attached a portion of my data set.InsertQuote.jpg
Here is where I am. The words in red are just colloquial words that I cannot seem to put into code.
Private Sub CmdInsert_Click()
Dim Company As String
Dim PartNumber As Variant
Dim Condition As String
[Code] .....
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx‎
I need to start with a worksheet without any objects, namely pictures. Without knowing the name of the object, is there a way to clear all objects on a worksheet?
Second: on a different worksheet there are products with pictures with the product number. When a user selects the product number I want to copy that picture and copy it to J42 of the first sheet. My issue is positioning the picture.
I use the following code to copy entire rows from one sheet to another and this is pretty standard.
VB : rng.EntireRow.Copy Sheets("Sheet2").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Assuming that Sheet2 is blank, this of course copies the rows to Sheet2 starting at Cell A2 and down column A. I would like to modify the code so that I can specify at which row the copy should start. For example, I might want to start the copy at A1 instead of A2, or at A10 instead of A2.
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
I have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
On Error GoTo Err_Execute
'Start search in row 1
LSearchRow = 1
[Code] ....
Err_Execute:
MsgBox "An error occurred."
End Sub
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
[Code] .....
I have the attached a workbook (& the code) which merges the worksheets from 7 different workbooks together into a 'Raw data' worksheet in my master workbook. It is driven off a parameters table which allows you to select which workbooks/worksheets you want to include in the merge. - The code works fine however when it is copying the data from each worksheets it is just copying all the data as a 'block' copy where I need it do do it row by row becuase I dont want to copy the row if colum C in each row contains no data, ie. it is blank.
So in my code I need another loop which will: Copy data from column A - E for each row if column C is not blank. Paste into Column B - F in Raw Data worksheet (as column A contains the source filename) Loop until it reaches no more data. I adeeally just want to copy the specific range as above, not the whole row but either will do. This is my code, refer to attachment too which includes master workbook and an data entry workbook where the data comes from.
Sub OpenWorkbooks()
Dim Book_Name As range ' List of available books
Dim Sheet_Name As range ' List of available sheets
Dim dLastRow As Long
Dim oLastRow As Long
Dim sLastRow As Long
Dim DestinationSheet As Worksheet
Dim SourceSheet As Worksheet
Dim WorkBookList As range
Dim WorkSheetList As range
Dim WorkbookPath As String
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
'set source and destination sheet
Set DestinationSheet = Sheets("Raw Data")
Set SourceSheet = Sheets("Parameters")........................
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies View RelatedCan a formula be created to link certain information to a specific cell.
In a workbook I have 10 worksheets that are have information in identical locations:names are English, Math, Science, VPA.......and so on.
I created another worksheet that prints out linked info from the worksheets: Eng, Math, Sci, VPA........
Current Print Worksheet called "Print" link to the "English" sheet
links in cells look like this
A1 - +English!B10
A2 - +English!B11
A3 - +English!C20.......................over 100 links
Can I have a formula in the link cell where I can type "Math" so all the cells change to links to another sheet.
So in B2 I type "Math" and the formula changes
A1 - +Math!B10
A2 - +Math!B11
A3 - +Math!C20
I have spreadsheet of data, I need to extract any rows that have blanks cells in columns F or P or T.
If possible I would like a macro I could run that would cut all of the rows that meet the above criteria and paste them in to a separate sheet.
I am using the code below in Excel 2013.
Sub Test()
For Each Cell In Sheets(1).Range("J:J")
If Cell.Value = "131125" Then
[Code]....
This works great except that it pastes formulas. I would like to paste values only. I've tried
" PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False" and it gives me an error.