Copy Text From One Sheet To Another Using VBA
Feb 19, 2009
I am not familiar with using VBA and believe this could solve my problem, I would be glad of any assistance.
I am trying to copy text from sheet 1 of my workbook onto sheet two of my workbook, whilst consolidating into a nice neat list omitting any blank cells.
The text appears on multiple tables each table has 10 rows throughout worksheet 1
A1 = Good
A2 = Bad
" "
A10 = Fantastic
A15 = Good
A2 = Bad
A10 = Fantastic
I hope this makes sense, I do have a formula that will do this =IF(ROW()-ROW($E$500:$E$509)+1>ROWS($K$35:$K$44)-COUNTBLANK($K$35:$K$44),"",INDIRECT(ADDRESS(SMALL((IF($K$35:$K$44<>"",ROW($K$35:$K$44),ROW()+ROWS($K $35:$K$44))),ROW()-ROW($E$500:$E$509)+1),COLUMN($K$35:$K$44),4))) however I have multiple tables and the formula greatly reduces the speed at which the sheet is working.
View 12 Replies
ADVERTISEMENT
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Jan 25, 2014
I am looking to copy the columns containing firstly H and then A from this sheet (sheet 1) to sheet 2. At the moment the H and A run in sequence, sometimes 2 or 3 times in a row but I want them to appear seperatly in sheet 2 so that I have all of the H's together in a sequence and all of the A's together in a sequence further down the sheet. I haven't used macros since school and don't have the first idea where to start. Do I need macros or is there a simple formula I can input? The data I am looking to copy is below with the letters in question 3 rows down.
Week 22
Week 21
Week 20
[Code].....
View 7 Replies
View Related
Jun 12, 2007
clicking the platform button on sheet 2 runs a module that plots trains waiting in platforms 1-15 the value are got from sheet 1 columns
a = arrive
b = depart
c = platform
ideally i now need these shaded cells to show the departure code of the train they represent and i need every cell of the train to show the code (eg all 60 cells if the train stays for 1 hour). this is because some trains arrive as 1 but detach and depart as 2 or more trains. this would show where 1 train leaves but another part remains to leave later under another headcode, the codes i need placing over the shaded cells are the code in column I sheet 1 (ideally written in the invert colour of the shaded cell so they can be read easily) as an example of what i'm after i've manually added the code for 1 train in black on sheet 2 for the 1st train in the list http://us.f13.yahoofs.com/bc/466da4e...i.abGBkbJbSCH_
View 4 Replies
View Related
Jul 9, 2014
I have been trying to crack this all afternoon to no avail - I've read every thread on it and not been able to customise the macros to work! In fact - i've never written a macro before!
If cells in Colomn E on Sheet '2014 Events' contain the text "Park" - Copy the Row to Sheet 'Park Events'.
View 3 Replies
View Related
Mar 23, 2006
I have a commissions workbook with about 20-30 sheets. In A1 of every sheet is a Name and in column G is a bunch of Numerical Values. I want to create a "Grand Total" sheet where I have the Name and the Values corresponding from each of the sheets onto my final one.
View 3 Replies
View Related
Nov 30, 2009
i'm trying to do (for the past couple of days manually) is copy the names from the 2nd sheet to the 1st sheet but need to make sure that the proper location ID match that of the 1st sheet. If two names is assigned to the same location, a new line will be added to the 1st sheet but never allow if the location ID do not exist.
<1st Sheet>
A1, B1, C1, D1
ID, Name, Loc ID, Location, contact, date
1011,-, 101, 1/F, RM101,-
1012,-, 102, 1/F, RM102,-
1013,-, 104, 1/F, RM104,-
1014,-, 203, 2/F, RM204,-
<2nd Sheet>
Name, Loc ID, date
Thomas,101,10/03/09
Anthony,101,11/02/09
George, 102,11/25,09
Susan,203,10/31/09
Carrie,103,11/20/09
View 4 Replies
View Related
Feb 8, 2010
I would like to create a spreadsheet that when a selected number of cells are set to "yes" then a lookup to a small table should then copy 3 columns of text at the side of that table, if the criteria is met with a "1". If either f2, f3 or F4 = "Yes" then look up A9:c16 and if there is a "1" in respective column then copy all text to the right in columns D, E & F to "result" work sheet. I am trying to create auto copy of selected data without the use of a filter, by pressing a cell / button.
View 4 Replies
View Related
Jul 16, 2013
I have a workbook that writes what I need to do. When done I need to type in another sheet the exact same text and the date I did it.
I wonder if its possible to add a checkbox and when this checkbox is pressed it will automatically copy/paste the text to the next free cell of the other sheet, so I only need to type date.
Here is the workbook: [URL] .....
Check box would be added in cell A17, A18, etc.
And the text would be copied to sheet Preventive Maintenance Records in the next available cell in column A.
View 2 Replies
View Related
Oct 9, 2009
Essentially, I have 2 Sheets:
"SheetWSS" = data to be copied
"SheetWSD" = destination of copied data.
Below is a sample of the data in "SheetWSS"
----------A------------------------B-------------------------C
1------Trade ID -------Description---------System no.
2--------579----------------Loan ---------------------- 7
3--------580----------------Deposit---------------------22
4--------702----------------Deposit--------------------- 11
5--------703----------------Loan ----------------------- 58
6--------732 ---------------Loan------------------------66
7--------733----------------Deposit-------------------- 99
etc...(no more than 10000)
Now, an explanation of the data:
1) I work for a small bank (CORP) that takes deposits and gives loan.
2) CORP books these trades using only system no. 7 and 11; other system nos. belong to customers.
3) When a single trade is booked, the 2 sides of the transaction is recorded (by Trade IDs) . E.g rows 2 and 3 relates to one trade. So if CORP loans money with system no.7 to CUSTB, who uses system no.22, it shows for CORP a loan and for CUSTB, a deposit.
4) Everyday, the data in "SheetWSS" is updated with a different number of rows from previous, but the number of columns remain the same.
So, here's what i'ld like the macro to do:
1) Go into Column C, find system no.7 and 11.
2) For each 7 and 11 found, Copy the next row . So if for e.g, system no.11 was found in C4, i want the ENTIRE ROW 5 to be copied.
3) Paste the entire next row in "SheetWSD" until we have a list of all opposing sides of the same transactions initiated by CORP.
View 3 Replies
View Related
Aug 11, 2011
Monthly, I get a CVV of data with associated statistics. I'm generally only interested in rows with the first cell (A) containing specific words.
The cells (column A) are those such as below:
make a webpage free create web page free make a website with yellow pages how to create web page
So, if I wanted to take copy the rows where the cell contains the text 'create web page'. I want it to take 'create web page free' and 'how to create web page' and the cells in their respective row.
I would like these rows to be copied into a new sheet.
View 7 Replies
View Related
Jul 20, 2013
I have this code on my sheet1:
VB:
Private Sub Worksheet_change(ByVal Target As Range) Dim KeyCells As Range
Set KeyCells = Range("K:K")
If Not Application.Intersect(KeyCells, Range(Target.Address)) Is Nothing Then
If ActiveCell.Value = ActiveCell.Offset(0, -6).Value Then
ActiveCell.Offset(0, 1).Value = ((ActiveCell.Offset(0, -4).Value) * (ActiveCell.Offset(0, -5).Value)
End If
End Sub
Now I would like to add another code: When I will change value in actual cell (sheet1) then copy value from cell A1 (sheet1) to the first free cell in column A (sheet2). I still have problem with error that I am out of range if I tried to copy it to sheet2.
View 2 Replies
View Related
Apr 11, 2014
I'm creating a workbook to keep track of my utilities payments, one sheet for one utility and so on. I like to copy two cells from each sheet to another one to keep me updated of the amount to pay and the date. an example: column A with text, if text "NEXT" appear in column A, copy the value of two cells (at columns B & C) at the right of "NEXT" to another worksheet, if that possible? Below is a photo as an example:
excel.jpg
View 5 Replies
View Related
Feb 24, 2014
I have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies
View Related
Dec 16, 2008
I would like to create macro, where it would on macro run copy text from active cell and find that value in another sheet (in column H) and select that cell.
What I did is this:
View 5 Replies
View Related
Dec 30, 2011
how to work macros or VBA
I have a workbook with multiple sheets named by month and year that I use to keep track of loans I work with at a bank. In these sheets I have info such as:
Column B = due date
Column D = loan# A
Column E = loan# B
Column F = status
Column H = followup needed
(Columns A,C, and G aren't important for the current need)
What I am trying to do is create a main sheet (TRACKER) that all I will have to do is press a macro button and it will pull info for each loan that is in a pending status.
I need a macro that will search column F (Status) on all sheets and find each instance of "Pending" and once that is done, copy rows B,D,E, and H in each "Pending" instance and copy them to their designated area on my TRACKER sheet. After that is done I need it to continue to the next "pending" instance and do the same on the next available line on my TRACKER sheet.
The overall goal would be that everyday I can press the macro and it will repopulate the sheet with the current pending items (as each day I will change pending status' to complete and no longer need to track it the next day).
I already have the tracker sheet set up and ready to go with the spaces as follows:
Column G&H = Merged cells where due date will need to go
Column I&J = Merged cells where loan# A will need to go
Column K&L = Merged cells where loan# B will need to go
Column M thru S = Merged cells where followup needed will need to go
View 9 Replies
View Related
May 14, 2009
I have the following code in another workbook that is used to populate a cell on the same sheet based on input to cells in column 'A'.
Is it possible to modify this for the attached workbook to select a cell with data (numbers) on the Input Data sheet in column 'E', add text to the beginning, ('CG' in this case), and paste the result to the Import Template in the corresponding cell of column 'A'? I currently have a formula copied to dozens of cells in 'A' but since the number of rows for the Input Template is variable, there are usually cells in 'A' that contain CG but no corresponding data in the rest of the row.
View 8 Replies
View Related
Apr 18, 2009
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View 8 Replies
View Related
Jan 12, 2010
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
View 9 Replies
View Related
Mar 30, 2014
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
View 2 Replies
View Related
Feb 26, 2009
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies
View Related
Oct 27, 2008
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
Nov 22, 2009
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related
Mar 27, 2008
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies
View Related
Jul 6, 2012
In a sheet (4) I have a pivot refreshed by a VBA macro code. Since I have defined a Chart on this pivot, I need to copy this pivot in a new sheet to avoid to reduce rows using a filter of the Chart. I copy this pivot using this VBA code
Sheet4.Select
Sheet4.Copy After:=Sheet2
I have e new sheet with a number Sheet(n) not equal to maximum sheet number +1
For a new run of the VBA macro I need to delete this sheet
Sheets(n).Select where (n) is not = maximum sheet number +1
ActiveWindow.SelectedSheets.Delete
Then I need to avoid the message box where I need to confirm to delete the sheet because the sheet is not empty.
Is there a solution to copy a pivot in a new sheet replacing the previous pivot and vithout changing the number of the sheet?
View 1 Replies
View Related
Apr 3, 2007
Everything seemed to be working until i tried to copy and paste something on my spreadsheet (sheet titled Input Sheet). When I paste anything onto this sheet I see the Paste happen and then Excel just hangs (no errors?). I just left it for over 5 minutes and nothing happened (still hanging). I had to close it down using X
I have LOTS of different codes and different sheets in my spreadsheet. I was wondering if anyone knows how I can go about Pinpointing the problem. Chances are no one will be cutting and pasting but I would like to know why this is happening but have no idea how to go about investigating?
View 9 Replies
View Related
