Copy Columns Containing Certain Text From Sheet 1 To Sheet 2?
Jan 25, 2014
I am looking to copy the columns containing firstly H and then A from this sheet (sheet 1) to sheet 2. At the moment the H and A run in sequence, sometimes 2 or 3 times in a row but I want them to appear seperatly in sheet 2 so that I have all of the H's together in a sequence and all of the A's together in a sequence further down the sheet. I haven't used macros since school and don't have the first idea where to start. Do I need macros or is there a simple formula I can input? The data I am looking to copy is below with the letters in question 3 rows down.
Week 22
Week 21
Week 20
[Code].....
View 7 Replies
ADVERTISEMENT
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Dec 30, 2008
when i copy columns resulted from another columns operations and paste in new sheet i got garbage ,could you tell me why and how to overcome this problem.
View 2 Replies
View Related
Apr 18, 2009
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View 8 Replies
View Related
Jan 12, 2010
I want to create a macro button that can create copy, insert, paste and rename the new sheet in next month's name, like if the active sheet's name is January, I want to copy the whole sheet of January, insert new sheet, paste the new sheet and rename the new sheet to next month like February?
Also rename the new sheet (February) cell B3 the same as new sheet's name (February)
So if month of February is near end, the macro button in February will create the same way as Jan did which means the next sheet will be named March and so on.
View 9 Replies
View Related
Nov 13, 2013
How do I copy the contents in column C on sheet 1 to column A on sheet 2?
When I export from quickbooks it is going to replace sheet 1 with updated items and prices. So I want sheet 2 to have the same information so it retains my formulas in other columns?
View 1 Replies
View Related
Mar 14, 2014
I need a macro to copy every 4 columns to a new sheet and name it what is in the 2nd column 7th row
So it would copy columns A-D to a new sheet and name the sheet B7. Then copy E-H and name it F7....etc.
It could stop when there is nothing in the 2nd column 7th row of each division.
View 1 Replies
View Related
Apr 18, 2007
how to copy certain columns using macro code. I have attached a sample file and shaded the cells that I want the macro to select for me.
The problems I face are
1. Cells are merged.
2. Cell in one row has 2 sub divisions on the row below.
Also the row headers always will not be in the same columns. I need to use VLOOKUP or HLOOKUP to find out whether the column am searching is the actual one I want.
For example I need to search for Name using VLOOKUP / HLOOKUP and then copy the names under them. Similiarly to all the other cells that I need.
View 9 Replies
View Related
Jul 7, 2012
I am trying to copy and past different columns from different sheets and copy them in one sheet which I named "BI Output Data".
VB:
'This copy and past the BI Result'
If CheckBox1.Value = True And CheckBox7.Value = True Then
With Sheets("AFA Output Data")
[Code]....
View 2 Replies
View Related
Jun 1, 2009
I am trying to copy rows that match a date range but I only want some of the columns to be copied to a pre-defined sheet.
For example, if the row is selected as a match because it is within the desired date range, I want the data in columns 'A-F', 'I-J','N-O' to be copied to the sheet 'Report' starting in 'A3'.
View 12 Replies
View Related
Aug 12, 2008
I've searched and tried some similar examples but cannot find a fit that works. I have two columns of data on the same worksheet- IO2 & IR2 (3 columns apart) that will have varying end lengths. I need to combine these into one column on a different tab ( cell A8)- one on top of the other. When it gets to the first blank cell I want it to stop and grab the second column till it gets to the first blank cell. Note-these columns need to stay in the current order but format will not matter. It sounds so simple but I cannot make a formula or macro do what I need it to. I would prefer a macro because the workbook is already so slow.
There is a second part too (but I couldn't even get past the first!). Once the above is done. I will actually have the process repeat and return two different columns next to each other. I then want to reference these two columns and a month and find the correlating set of date in the first worksheet and bring it over. Here is the current macro I was trying (for part 1) but I can only get 1 column returned.
Sub FCST()
Dim improw As Long, impColumn As Long, MyCell
Dim ws1 As Worksheet, ws2 As Worksheet
Dim improw2 As Long, impcolumn2 As Long
Application. ScreenUpdating = False
Set ws1 = ActiveWorkbook.Sheets("Marketing")
Set ws2 = ActiveWorkbook.Sheets(" Forecast")
improw2 = 8
impcolumn2 = 1
impColumn = 249
Do Until impColumn = 252
improw = 2
Do Until improw = 11078 'this is the number of possible entries in each column.........................
View 4 Replies
View Related
Mar 30, 2014
Example, I have a sheet named DATA1, I want to add a new worksheet, copy a certain range from the DATA1 sheet to the new sheet and rename it the same name DATA1 and delete the old DATA1 sheet.
Also, the sheetname will be unknown, the macro must get the sheet name first.
View 2 Replies
View Related
Nov 3, 2013
I was wondering if there was an easy way to copy columns (headings) and the formulas to a new sheet. I'm currently working on Sheet 1, need to copy everything onto a new sheet so I can keep things separated by week..
Example, Sheet 1 is Week October 30th, would like my 2nd sheet to have same exact headings and formulas which I would then rename to Week Nov. 1st etc..
Also, is there a way that I can then copy the 4 sheets that would make up a month into a new spreadsheet so I can then start December...
View 5 Replies
View Related
Jun 30, 2014
I need to copy 120 columns from one sheet to a new. The columns needs to be in a certain order. So I need fx. from the original sheet column 2 is called "number" and I need that column to be put in new sheet as column 1 with new headline "no." Guess I need almost the same code for all of the just with different names etc.
I also need to put in blank columns with specific headlines in between some columns - so fx. in column 4 I need a blank column with headline "search"..
View 3 Replies
View Related
Jul 23, 2013
I need to copy multiple rows in a spread sheet with a forloop. The problem is I only need a select few columns. A:C and F:H. When pasted into a new sheet I need to columns to come in A:F
I have a loop that does this already but it is huge and is slowing down my file. Here is part of it.
Sub MinerInfo()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
resultsRow = 2
[Code]...
View 4 Replies
View Related
Sep 10, 2008
I’m trying to do is identify duplicates in a LARGE column of numeric data. As a matter of fact, it’s about 112,000 rows which won’t fit on one spreadsheet since a spreadsheet can only handle 65,536 rows. So the caveats are that the information needing scanned for duplicates is all ONE body of data even though it is on 2 spreadsheets so I am not comparing one sheet of information to the other rather all 112,000 lines need checked for duplicates as a whole. Once duplicates are found I would like them to be highlighted in yellow on the original 2 worksheets but then also have the duplicates copied to a new sheet.
View 2 Replies
View Related
Feb 19, 2009
I am not familiar with using VBA and believe this could solve my problem, I would be glad of any assistance.
I am trying to copy text from sheet 1 of my workbook onto sheet two of my workbook, whilst consolidating into a nice neat list omitting any blank cells.
The text appears on multiple tables each table has 10 rows throughout worksheet 1
A1 = Good
A2 = Bad
" "
A10 = Fantastic
A15 = Good
A2 = Bad
A10 = Fantastic
I hope this makes sense, I do have a formula that will do this =IF(ROW()-ROW($E$500:$E$509)+1>ROWS($K$35:$K$44)-COUNTBLANK($K$35:$K$44),"",INDIRECT(ADDRESS(SMALL((IF($K$35:$K$44<>"",ROW($K$35:$K$44),ROW()+ROWS($K $35:$K$44))),ROW()-ROW($E$500:$E$509)+1),COLUMN($K$35:$K$44),4))) however I have multiple tables and the formula greatly reduces the speed at which the sheet is working.
View 12 Replies
View Related
Jun 12, 2007
clicking the platform button on sheet 2 runs a module that plots trains waiting in platforms 1-15 the value are got from sheet 1 columns
a = arrive
b = depart
c = platform
ideally i now need these shaded cells to show the departure code of the train they represent and i need every cell of the train to show the code (eg all 60 cells if the train stays for 1 hour). this is because some trains arrive as 1 but detach and depart as 2 or more trains. this would show where 1 train leaves but another part remains to leave later under another headcode, the codes i need placing over the shaded cells are the code in column I sheet 1 (ideally written in the invert colour of the shaded cell so they can be read easily) as an example of what i'm after i've manually added the code for 1 train in black on sheet 2 for the 1st train in the list http://us.f13.yahoofs.com/bc/466da4e...i.abGBkbJbSCH_
View 4 Replies
View Related
Jul 4, 2014
I'm trying to create a macro that will look at the values in one column (column G) and whenever there is a new value, it will copy the data from 2 other columns (I and J) into a new sheet with the original column as the title. I can't think of a better way of explaining that so I've attached a sheet with 'Raw data' being the source sheet and 'Outcome' being the hoped for final product.
I have color coded the sheet to show where the data is coming from, but do not want the colors in the actual sheet.
View 8 Replies
View Related
Sep 27, 2009
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
View 14 Replies
View Related
Aug 24, 2012
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
View 1 Replies
View Related
Aug 21, 2013
Here's what I have:
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary()
Application.DisplayAlerts = False
On Error Resume Next
Sheets("Summary").Delete
Application.DisplayAlerts = True
n = Application.Worksheets.Count
[Code]...
View 4 Replies
View Related
Feb 4, 2008
I need to track only certain tasks id's out of entire task id database. I have 1 column of data on sheet "A" that represents task id's I want to track. On sheet "B" I have multiple columns of data, the first column being the task id's. I need to compare the column on sheet A with the first column on sheet B. If there is a matching task id, I need to copy the entire row of data from sheet "B" on to a new sheet "C". If there is no matching task id on sheet "B", I would like to copy just the task id. Each week I would get a new set of data for sheet "B" (which can vary in length) and I need the ability add or subtract task id's on sheet "A" that need tracking. See the attached xls file for a piece of sample data.
View 4 Replies
View Related
Feb 26, 2009
I have I workbook that contains 2 sheets. The first sheet "Business Objects" is the master list. The second sheet "Gene" contains similar data but is incomplete. There is a unique identifer for both sheets and that is item ID. what I would like to do is look at the Item ID column on sheet1 compare it to SS# on sheet two and copy any rows from sheet1 to the end of the sheet in sheet 2. I have found in my searches on this forum a bit of code that identifies the ones in sheet1 that are not in Sheet2 and highlights them red(which is not neccessary for me, but I am struggling to figure out how to take that and paste it to sheet2.
View 3 Replies
View Related
Oct 27, 2008
EXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies
View Related
Sep 25, 2013
If I'm using this function to find the specific text "EXPIRED" in the specified cells, how can I add additional cell ranges on the same sheet to this function?
D17:D34 as well as F17:F34
=IF(ISERROR(MATCH("EXPIRED",Homepage!D17:D34,FALSE)),?"OK","ALERTS")
View 2 Replies
View Related
Jul 9, 2014
I have been trying to crack this all afternoon to no avail - I've read every thread on it and not been able to customise the macros to work! In fact - i've never written a macro before!
If cells in Colomn E on Sheet '2014 Events' contain the text "Park" - Copy the Row to Sheet 'Park Events'.
View 3 Replies
View Related
Aug 11, 2012
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
View 3 Replies
View Related
Oct 27, 2011
I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies
View Related
Jul 27, 2013
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 01:00 AM 9 10 11 12
Sheet 2
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 12:30 AM
7/27/13 12:45 AM
7/27/13 01:00 AM 9 10 11 12
View 1 Replies
View Related
