I have 2 workbooks, and want to copy an entire worksheet from 1 to the other workbook.
In the closed workbook, I want to copy "Sheet1", and paste that into the open workbook on worksheet "Original File". What code do I need to complete this?
Is there code that will take certain data from one Excel sheet to another named file in a different place on the network? Example Copy cell aa47 from "Recent Faxes.xls" that sits in "correspondence" folder. Then paste into cell B25 "Current Documentation.xls" in the "Sales Contacts" folder
View 2 Replies View RelatedI am trying to use a routine that I copied from another thread on this forum, but I get an error message: Runtime error "1004" Copy method of worksheet failed.
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedI have certain excel file that i want to be able to write a macro in order for it to extract certain information from certain cells on different sheet. In other words, i want cell A2 from each of the three different worksheet i have under different files. And have those data automatically update a master excel or access file whichever might be easier.
View 4 Replies View RelatedI have a code in file A that opens several files (B,C,D&E), copies some data from them, then closes the files. That part of the code works fine, but each of the files that are opened (B,C,D,&E) have a Workbook Open event that causes the file to save automatically every 30 seconds. (I know this is not recommended, but this is what the user wants.) The files also have a Workbook Before Close event that is supposed to stop the timer so the file will close without reopening. These each run fine on their own.But if I run code A, the workbook Before Close event in file B (C,D, & E) does not seem to run and the files reopen after 30 seconds to save. When I step through the code it works fine and goes through the Before Close event in each file and the files remain closed.
View 3 Replies View RelatedI have the need to be able to open a closed file to archive some data from a
current file.
what coding i need to be able to kick the "open file" bit off?
I have about 50 CSV files in a directory named C:POSTAL. Each file has about 4000 records with three fields, Name, Address, Phonenumber. I would like to find some way to combine them into one large CSV file named ALLRECS.CSV so that other parts of the program can open that file and search it by Phonenumber, so I can display the Name and address on the screen. Obviously it is too large for Excel, at the moment. In old DOS you were able to use
copy *.CSV ALL.CSV"
to combine all the CSV files into one. Every now and then I want to delete the old ALLRECS.CSV file and replace it with a new one, as we update the phone numbers in the individual 50 files. For example I would like to use a button so the user can simply update whenever they wish by clicking on it, deleting the old and adding the new.
Is it possible to automatically copy or load data from one excel spread sheet into another excel sheet? Could this be done with a macro?
View 14 Replies View RelatedI have this macro I recorded and pieced together from info I found on the net. It works the first time you run it but then it dies because the next new workbook is not "book1" what I would prefer is to have it save the new workbook as the value of sheet2 F2 and "Product Bulletin" so it would look like "##### Product Bulletin" but I don't know how to write it.
View 6 Replies View RelatedI am converting a xls workbook into a tab delimited text file, but instead of copying the entire workbook, I want to copy the first two columns of the workbook except for the header row.
This is my code which is copying the entire workbook -
Code:
Private Sub SaveAsTabDelimited(ByVal sFileName As String)
With ActiveWorkbook
.SaveAs FileName:=sFileName, FileFormat:=xlText, CreateBackup:=False
End With
End Sub
[Code]...
how can I achieve this in my macro. I tried using the range(A2:B100000).Select syntax, but it didn't work.
I have Workbook with 85 Sheets. I want to copy Entire Sheets Whose Name Starts with CC to a Text File with Tab Seperated Columns . The Other Sheets should be ignore.
View 12 Replies View RelatedI want to copy a bunch of data from a text file and paste in into an excel worksheet I have open. I want to paste it at the end but I don't know how large the data range will be each time so I can't select that size range. I have this code so far:
FileToOpen = Application. GetOpenFilename("Text Files (*.txt), *.txt")
If FileToOpen <> False
Then
Workbooks.Open FileToOpen
Else
Exit Sub
End If
Cells.Select
Selection.Cut
Windows("myfile.xls").Activate
Range("A1").Select 'THIS IS THE OLD CODE FOR THE FIRST IMPORT
ActiveSheet.Paste 'I NEED TO REPLACE THIS WITH THE CODE FOR APPENDING
'OR PASTING AT THE END OF MY RANGE
For some reason the following Macro won't work:
Code:
Sub ExtractDataTest()
Dim FilePath$, Row&, Column&, Address$
'change constants & FilePath below to suit
'***************************************
Const FileName$ = "Dxo.xlsx"
Const SheetName$ = "Open"
[Code] .......
I get a run-time error '52' on line ("Bad file name or number"):
Code:
If Dir(FilePath & FileName) = Empty Then
And when location is 'C:' it works and I don't get an error.
I am trying to summarise data from 50 different files (updated by 50 different users) into one file in one place. To do this I created a simple sumif function that links to those files. This sumif works correctly when those files are open. But when I open my output file after changes have been made to one or more of 50 input files, sumif function doesn't work when I hit update at the file opening pop up question and get #value error. If I start opening those files this error goes away and it works great again.
View 2 Replies View RelatedI want to copy the sheet named "data" from closed workbook (xlsm, xlsx, xls) via ADO.The closed workbook will be choosen by user via dialog box. The code must check the existence of "data" sheet. If there is no, then the code must give a warning. Futhermore, which is able to give a warning against the mistake of selecting the file itself.
View 1 Replies View Relatedi know there is information on this ontime method, i haev read through it, but since i am working with reuters running live in the background they just dont work.
Anyway, on a normal excel sheet, I have made the automated macros run on a timer, which is great. BUT If someone switches off my pc, its not going to be so great because i dont think the macro would run without excel being open.
QUESTION:
How can i make my macro run every morning at 8am? Assuming the worksheet is closed, even excel is closed. i am sure the answer is starring me in the face, i am just getting boerd of looking at it! in the Thisworkbook:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.OnTime dTime, "thismodule", , False
End Sub
Private Sub Workbook_Open()
Application.OnTime Now + TimeValue("20:00:00"), "thismodule"
End Sub
and in the Module:
Sub thismodule()
dTime = Now + TimeValue("08:00:00")
Application.OnTime dTime, "thismodule"
I'm trying to find a way to import data from an external excel file that the end-user will ultimately end up choosing using the application. getopenfilename dialogue. I'm able to sucessfully open the file, but what I'm really trying to do is import data from one specific column within the file, preferably without the source spreadsheet popping up.
So, is this possible to do with VBA? Also, will I run into any issues if I try to import from an Excel 2.1 file to an Excel 2003 file using VBA? Finally, I need to be able to import one file, and then be able to add to that an import from another file. I'm thinking that this could be accomplished using a variant variable, but is there already a function within Excel so that I won't have to create my own add-to function.
Using Excel 2003 and cannot copy a worksheet and am getting this error:
File not found: CDocumentTempVB4B.tmp
I would like to read a few custom properties of excel workbook, even if they are close.
My intention is to build a list of compatible workbooks.
The compatibility woul be determined fom a custom property.
How can I read a custom property from a file wothout opening it?
I have a workbook with a button to get updated data. The button simply opens the other workbook and then closes it. THe problem is it opens the book and then closes it before the opened book has a chance to finish it calculation resulting in lots of #value errors. The book that is being opened works fine but because it is shared it can't be left open and needs to be closed asap, though it should be allowed to finsih calcs before it gets closed again. If anyone know a way to make the following temporarily halt until the opened book finishes calculating before it closes it.
Workbooks.Open Filename:= _
"X:gas daily pricingGD pricing weather call active summer.xls", ReadOnly:=True
ThisWorkbook. Saved = True
ActiveWindow.Close False
I have a file created in Excel 2003 that uses a vlookup to reference another file, also created in Excel 2003. The function returns VALUE when the referenced file is closed. I get the VALUE error whether or not I update links upon opening the file. If I open the source file, the function calculates properly.
Here is the formula when the referenced file is open:
=VLOOKUP(A38,'[June Scorecard confirmation.xls]VPSC Summary'!$C$10:$F$22,4,FALSE)
The full & correct path appears in the formula when the referenced file is closed.
Columns C, D & E in the referenced range contain text, column F contains a Sum. This file is linked to another file, also using lookups. The linked area in this file works without problem, but it is a precedent to the calculation in column F.
Both these files reside on a network in subdirectories of the same logical drive. I am using a laptop that briefly had Excel 2007 installed on it, but was wiped clean before it was issued to me.
I'm reading data, from specific cells off a closed workbook. When the sheet that needs said cell data is activated, it automatically opens the workbook and references the sheet nessecary. The issue I've come across, is I now need to access another workbook (Easy to open) with 12 sheets 1 for each month, and only read from the worksheet of the actual Month. Kind of lost on how to possibly make this work. I basically need something like: =location/[workbook.xls]worksheet!cell - where worksheet = B12 and B12 =month(today()) and is formatted to MMMM
View 4 Replies View RelatedI am trying to return the value from "WorkbookZ" cell A1. The workbook is closed and I am trying to utilize the indirect function
=INDIRECT(G5 & "!A1")
CELLG5 = 'G:Folder1Folder2[WorkbookZ.xlsm]Sheet1'
way to do use a vlookup using a range from a closed worksheet?
View 9 Replies View RelatedI have code that links my existing workbook to a closed workbook. It works as planned but it goes to far. In my first workbook, the one containing the code, I may have up to 30 worksheets. If I am on Sheet5 I may need to run the vba code to update cells X:X only on Sheet5 but instead it updates cells X:X on all Sheets in the workbook. How can I keep this from happening?
I have asked this on another forum but it seems to be a difficult thing, perhaps impossible thing to keep from happening.
Herewith I attached a sample excel file.
Structure file which i attached herewith include all the cost center details. normally it is a big file contain more than 1000 cost center details. Structure File.xlsx If i want a cost center name for some cost center code, i have to open this file and find a specific name.
What i plan is develop a macro function called "CC".
If I type =CC("D232") I need to print cost center name for D232.
But the problem is i don't want to open the structure file, without open that file, when i type this function i need a result.
1. A workbook is closed
2. In addition to the original workbook being saved, a copy of the workbook with the current date is also saved to the specified location of my choice.
For example
"C:UsersUSER1DesktopBackup Test as of 02-10-14"
3. If a copy of the workbook is already saved with today's date, then overwrite it automatically without prompting the user.
4. All the above happens without any user interaction.
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
I have a report that is collated from several other workbooks. The source workbooks follow the same naming convention throughout the year and so I have managed to concatenate the file path to bring through the text of the filepath and cell reference however cannot work out how to get the value of the cell. For example, I have the file path in A1, file name in B1 and sheet and cell referernce in C1.
I am using {=(A1&B1&C1)} which gives me R:CONFIDENTIALREPORT FOLDER[REPORT 24.09.07.xls]Sheet1!$D$1. To make matters slightly more difficult, the source reports would be closed. Is there an easy way or am I going to have to do this in VBA.