I want to copy the sheet named "data" from closed workbook (xlsm, xlsx, xls) via ADO.The closed workbook will be choosen by user via dialog box. The code must check the existence of "data" sheet. If there is no, then the code must give a warning. Futhermore, which is able to give a warning against the mistake of selecting the file itself.
View 1 RepliesI have an Excel file that contains formulas that reference external workbooks on a shared network. Each month, I copy the column of formulas over to the next month's column. Then, to update the file path, I highlight the new column and do a Find-and-Replace, swapping the previous month's name for the current month. This practice works fine. The only thing is ... the "Open File" promptbox appears for each formula where I updated the file path (i.e. and this can be hundreds instances!). I wind-up having to choose the file from the exact same file path. It is an unnecessary, and annoying extra step to take.
View 2 Replies View RelatedIve been searching this forum for simmilar topics but the info on them is all different and I cant get this to work.
All I want to do is open another workbook by
I have an excel template that needs to be copied multiple times and each sheet needs be named according to a list in an excel spread sheet. I also have a formula in the template that needs the value copied instead of the formula.
I got this script from an site and tried it. It runs but I don't see any spread sheets.
strComputer = "."
Set objWMIService = GetObject ("winmgmts:\" & strComputer & "
ootcimv2")
I have 1000 workbooks in a folder, each workbooks format is same.
as of now I open each workbook, and check if values in A10 is equal to B10, that is if the value in A10 is "100" I will check if B10 is also "100" if not I will make a note the file name.
I have more than 1000 workbooks in a folder, It is really difficult to open and check if the values are same. is there a macro, which will check the condition A10 = B10, if not get the file name in one sheet.
Is there code that will take certain data from one Excel sheet to another named file in a different place on the network? Example Copy cell aa47 from "Recent Faxes.xls" that sits in "correspondence" folder. Then paste into cell B25 "Current Documentation.xls" in the "Sales Contacts" folder
View 2 Replies View RelatedI have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
I have a code in file A that opens several files (B,C,D&E), copies some data from them, then closes the files. That part of the code works fine, but each of the files that are opened (B,C,D,&E) have a Workbook Open event that causes the file to save automatically every 30 seconds. (I know this is not recommended, but this is what the user wants.) The files also have a Workbook Before Close event that is supposed to stop the timer so the file will close without reopening. These each run fine on their own.But if I run code A, the workbook Before Close event in file B (C,D, & E) does not seem to run and the files reopen after 30 seconds to save. When I step through the code it works fine and goes through the Before Close event in each file and the files remain closed.
View 3 Replies View RelatedI have the need to be able to open a closed file to archive some data from a
current file.
what coding i need to be able to kick the "open file" bit off?
I am currently using a macro to copy a sheet from a closed workbook in to my current workbook. However this copying is based on the sheet name. At present when I run the following code
View 11 Replies View RelatedI am trying to summarise data from 50 different files (updated by 50 different users) into one file in one place. To do this I created a simple sumif function that links to those files. This sumif works correctly when those files are open. But when I open my output file after changes have been made to one or more of 50 input files, sumif function doesn't work when I hit update at the file opening pop up question and get #value error. If I start opening those files this error goes away and it works great again.
View 2 Replies View RelatedI have 2 workbooks, and want to copy an entire worksheet from 1 to the other workbook.
In the closed workbook, I want to copy "Sheet1", and paste that into the open workbook on worksheet "Original File". What code do I need to complete this?
i know there is information on this ontime method, i haev read through it, but since i am working with reuters running live in the background they just dont work.
Anyway, on a normal excel sheet, I have made the automated macros run on a timer, which is great. BUT If someone switches off my pc, its not going to be so great because i dont think the macro would run without excel being open.
QUESTION:
How can i make my macro run every morning at 8am? Assuming the worksheet is closed, even excel is closed. i am sure the answer is starring me in the face, i am just getting boerd of looking at it! in the Thisworkbook:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.OnTime dTime, "thismodule", , False
End Sub
Private Sub Workbook_Open()
Application.OnTime Now + TimeValue("20:00:00"), "thismodule"
End Sub
and in the Module:
Sub thismodule()
dTime = Now + TimeValue("08:00:00")
Application.OnTime dTime, "thismodule"
I'm trying to find a way to import data from an external excel file that the end-user will ultimately end up choosing using the application. getopenfilename dialogue. I'm able to sucessfully open the file, but what I'm really trying to do is import data from one specific column within the file, preferably without the source spreadsheet popping up.
So, is this possible to do with VBA? Also, will I run into any issues if I try to import from an Excel 2.1 file to an Excel 2003 file using VBA? Finally, I need to be able to import one file, and then be able to add to that an import from another file. I'm thinking that this could be accomplished using a variant variable, but is there already a function within Excel so that I won't have to create my own add-to function.
I want to copy the current region on sheet 3 and paste that into sheet2 starting with cell E4. But I don't want to actually use the copy method. I believe there is a way to do this. I was thinking the following:
[Code] ......
The idea I had was to simply state that cell E4 would be assigned the value of CurrentRegion on sheet 3. Is there a way to bypass the copy method?
If not, how to copy, then paste?
I would like to read a few custom properties of excel workbook, even if they are close.
My intention is to build a list of compatible workbooks.
The compatibility woul be determined fom a custom property.
How can I read a custom property from a file wothout opening it?
I have a workbook with a button to get updated data. The button simply opens the other workbook and then closes it. THe problem is it opens the book and then closes it before the opened book has a chance to finish it calculation resulting in lots of #value errors. The book that is being opened works fine but because it is shared it can't be left open and needs to be closed asap, though it should be allowed to finsih calcs before it gets closed again. If anyone know a way to make the following temporarily halt until the opened book finishes calculating before it closes it.
Workbooks.Open Filename:= _
"X:gas daily pricingGD pricing weather call active summer.xls", ReadOnly:=True
ThisWorkbook. Saved = True
ActiveWindow.Close False
I have a file created in Excel 2003 that uses a vlookup to reference another file, also created in Excel 2003. The function returns VALUE when the referenced file is closed. I get the VALUE error whether or not I update links upon opening the file. If I open the source file, the function calculates properly.
Here is the formula when the referenced file is open:
=VLOOKUP(A38,'[June Scorecard confirmation.xls]VPSC Summary'!$C$10:$F$22,4,FALSE)
The full & correct path appears in the formula when the referenced file is closed.
Columns C, D & E in the referenced range contain text, column F contains a Sum. This file is linked to another file, also using lookups. The linked area in this file works without problem, but it is a precedent to the calculation in column F.
Both these files reside on a network in subdirectories of the same logical drive. I am using a laptop that briefly had Excel 2007 installed on it, but was wiped clean before it was issued to me.
Please see attached files.
Book1.xlsx
test.xlsm
I am trying to copy the emf image object from "Book1" into the "test" workbook whilst the test workbook is open and Book1 is closed. The code I have put together currently sort of works, I mean that it copies the text data over but does not copy the object which is what I require.
Herewith I attached a sample excel file.
Structure file which i attached herewith include all the cost center details. normally it is a big file contain more than 1000 cost center details. Structure File.xlsx If i want a cost center name for some cost center code, i have to open this file and find a specific name.
What i plan is develop a macro function called "CC".
If I type =CC("D232") I need to print cost center name for D232.
But the problem is i don't want to open the structure file, without open that file, when i type this function i need a result.
1. A workbook is closed
2. In addition to the original workbook being saved, a copy of the workbook with the current date is also saved to the specified location of my choice.
For example
"C:UsersUSER1DesktopBackup Test as of 02-10-14"
3. If a copy of the workbook is already saved with today's date, then overwrite it automatically without prompting the user.
4. All the above happens without any user interaction.
I am trying to make Excel pull data out of a closed file based on a date range. The closed file is a log where people input data and enter the day they are doing it. I need to pull this data in my file and make it print into my worksheets so I can pass a report on to others with only the data they request from the log.
The range would be for 7 days and would have to be able to choose a few columns off this report.
I have a report that is collated from several other workbooks. The source workbooks follow the same naming convention throughout the year and so I have managed to concatenate the file path to bring through the text of the filepath and cell reference however cannot work out how to get the value of the cell. For example, I have the file path in A1, file name in B1 and sheet and cell referernce in C1.
I am using {=(A1&B1&C1)} which gives me R:CONFIDENTIALREPORT FOLDER[REPORT 24.09.07.xls]Sheet1!$D$1. To make matters slightly more difficult, the source reports would be closed. Is there an easy way or am I going to have to do this in VBA.
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
I want to run vba code when a excel worksheet closes. But I want this code to be used for every worksheet that opens. So the macro or vba code has to be loaded with Excel automaticly. I don't want to reenter the code in every template I use.
In access you can attach a module that runs when access or the application is closed: 'Private sub form_close()' Is it possible to create something like this in Excel.
An explanation what I want to do:
I Open/create a workbook from within access. When the worbook closes I want to look with vba if there is a cell called " Total" and if so I want to open a access databases and submit the total to the database. I don't want access to wait untill the worksheet is closed. If the worksheet stays open for a longer time I want to work on in access with other tasks.
I have a vlookup function which takes the data from a table in a closed file. A folder where the file would be located will change based on the value in the cell reference.
I used below formula which works, but every time when i drag or try to edit and enter, the path of the file path brokes and i need to reselect the path where the file is located. Is there a way where i can stop this?
Code:
=VLOOKUP(A2,'C:&E1&[Myfile.xls]Sheet2'!$A:$B,2,0)
I have two Excel sheets (test-excel-1.xlsx & test-excel-2.xls)The test-excel-2.xls will never be opened. When I update cells in test-excel-1.xlsx and save, I want them to automatically update to the test-excel-2.xls without having to open it. I have tried the "='[test-excel-1.xlsx]Sheet1'!$G$4" but that needs me to open test-excel-2.xlsI also want original values to be pasted in test-excel-2.xls rather than the code (this is later used in another program).
View 6 Replies View RelatedIF(ISNA(VLOOKUP($B$2;INDIRECT("'G:2007Projekt opfølgning[OMKLIST.xls]kreditor!'"&J24&":"&L24);2;FALSE));"0";VLOOKUP($B$2;INDIRECT("'G:2007Projekt opfølgning[OMKLIST.xls]kreditor!'"&J24&":"&L24);2;FALSE))
It is the part regarding til indirect that gives me problems
This form I can get it to work
IF(ISNA(VLOOKUP($B$2;INDIRECT("[OMKLIST.xls]kreditor!"&J25&":"&L25);2;FALSE));"0";VLOOKUP($B$2;INDIRECT("[OMKLIST.xls]kreditor!"&J25&":"&L25);2;FALSE))
But here I need the Omklist.xls to be open. And that I dont want.
The what i want is that the user can use the sheet with out oping the data sheet..
I found this code on the net, and it works, it DOES import the sheet specified from a closed status, but it adds 0 where there were blank cells.
The worksheets are static, the names will not change, but the information on them varies in # rows but the # of columns depends on the page..
The use of this import is to upgrade the program, by importing the sheets from the old version.
The first part browses for the file, which is good, because it could be stored anywhere and named anything.. I have it set up to "Click to Import"....
Private Sub CommandButton1_Click()
GetValuesFromAClosedWorkbook "C:", "Book1.xls", _
"Personnel", "A:H"
End Sub
This next part does the importing, but it fills all the columns and rows that were blank with 0's and fills all the way down to 65536 thru my column H that I specified that had data above.
Sub GetValuesFromAClosedWorkbook(fPath As String, _
FName As String, sName, cellRange As String)
how this code can be modifed to do the following..
Detect and copy ONLY the used range of the closed workbook.
Is it possible to have a code that will hide a specific sheet everytime I will close the workbook?
View 3 Replies View Related