Copying A Row Based On Matching Unique Values
Jan 26, 2009
I have the following code which takes a unique value from 'sheet 1', and searches for the value in 'sheet 2'. If there is a matching value in sheet 2 it will copy the full row into sheet three.
I need to extend the code so that all values from 'sheet 1' are copied to 'sheet 3' even if there is no matching value in 'sheet 2'. If there is a matching value in 'sheet 2' however I need the entire row to be copied to 'sheet 3'
Sub moving()
Dim c As Range, d As Range
Worksheets("Sheet2").Activate
For Each d In Worksheets("Sheet1").Range("A1:A500")
For Each c In Range("A1:A15")
If d = c Then
c.Resize(1, 70).Copy
Worksheets("Sheet3").Range("A65536").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues
Exit For
End If
Next
Next
Application.CutCopyMode = False
Worksheets("Sheet3").Activate
Range("A1").Select
End Sub
View 2 Replies
ADVERTISEMENT
Jan 9, 2007
I have a worksheet with two tabs.
First Tab
Account Name
Account Number
Second Tab
Account Name
Account Number
Account Ship Location Number
On the first sheet each account name and number only appears once.
On the second sheet there may be multiple entries for each Account Name and Number.
On the first tab for each row I want to compare the Account Number column to the Account Number column on the second tab. Where I have a match I need to count how many unique Account Ship Location Numbers correspond.
View 9 Replies
View Related
Sep 29, 2008
I have been searching through the forums for examples and haven't been able to find exactly what I am looking for.
Ok here is my issue. I need to compare the Conf # and line number on both sheet 1 and 2. So basically if the Conf # and the Line number match between page 1 and 2 then it copies the Conf #, Item Number(Sheet 1), and Detail(Sheet 2) to sheet 3 in a row. This needs to continue till the end of the Sheet 1. I have a pseudo report created with no code because I don't have a clue as to where to start.
View 14 Replies
View Related
Jun 4, 2013
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
View 9 Replies
View Related
Feb 17, 2010
Is it possible to have a formula where it will retrieve a specific value on one sheet based on matching values? Unfortunately, hlookup wont work as there are several values in the table where the 'lookup_value' is the same.
Example:
On sheet 1 (titled BSRC), I have a table which has a list of values in column 1. On column two I have the 'lookup value' which needs to be matched and all values underneath it to be retrieved from sheet 2 (titled CSRD). The 'lookup_value' range is on row 9 of sheet 2.
I have attached a sample spreadsheet for clarification.
View 7 Replies
View Related
Feb 27, 2014
I have two tables, Table1 one has only customer codes in it, and I have Table2 with plenty of customer codes and those customer name, surname, age, location...
And I want to match and copy each of those customer codes in Table 1 all the information which is on Table2
Table 1:
50025
50026
50086
Table 2: Considering that name, age and location is each in separate cell
50025JohnSecond25Location 1
60085EmilyThird 20Location 2
45454Wilhelm Fourth35Location 3
10000RoseFifth 60Location 4
50086JohnySixth 45Location 5
65501JacobSeventh18Location 6
50026Jackie Eighth22Location 7
And the outcame should be that it finds the value from Table1 in Table2 and copy's information in Table 1 like this:
50025 JohnSecond25Location 1
50026 Jackie Eighth22Location 7
50086 Johny Sixth 45Location 5
View 2 Replies
View Related
Jan 28, 2010
I have a cell (A1) that contains text.
That text will match a single value in a reference list (i.e. range of cells e.g. Z1:Z26).
When the match occurs (e.g. A1 = Z16), I want the format of the reference cell (fill color, text color) to apply to the cell of interest (A1).
The reference cells are manually formatted.
I know that I could create a long list of conditional format formulas instead of using the reference, but it seems that there must be some way to tell excel: if the cell value contents are equivalent, the formatting should be as well.
View 9 Replies
View Related
Mar 14, 2014
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
View 2 Replies
View Related
Mar 28, 2007
I am trying to do a spreadsheet for my boss and one piece of it has me stumped.
Based on same "die name" I need to return the minumum quantity available.
So, in column D i have a multitude of die names. Some of them match for those that match, I need to return in another cell the smallest quanity available in our die bank (column p).
View 10 Replies
View Related
Jan 22, 2010
Worksheet 1
I am calculating group averages for the following performers - very good, good, average, low, very low - for a series of factors.
Worksheet 2
Contains the same factors with the values for which Im trying to work out the average. Each factor has a performance rating above it, either very good, good, average, low, very low.
I need a formula which will match the performance rating from worksheet 1 (I3, J3, K3, L3, M3) to worksheet 2 and then calculate the averages of each factors based on those matches.
View 10 Replies
View Related
Dec 21, 2007
(refer to attached workbook)
For what I'd like to do, the attached workbook actually represents 2 or more workbooks. The 'Project-PO Report' tab is a sample of what will be several workbooks/reports that will be generated from the data in 'POTASK'.
The 'CMD_BUTTON' tab represents how I plan to use a command button " IMPORT DATA" to import the data into this workbook, then use "RUN PROJECT-PO-REPORT" to call the MACRO to achieve my objective,as stated below. (Originally,this workbook was about 8mb, so to get this under the size for attachment, I just copied the bare minimum of what I believe would be needed to assist me, and so there's no buttons or macros or dynamic name ranges, as there will be...)
Here's what I want to do: ...
View 3 Replies
View Related
May 21, 2014
I have a sheet with a lot of different data. In column M in workbook "Maximo report" there are 5 different values. I want to copy the rows that contain CDC_HVAC and that have the value "INPRG" in column G to the sheet HVAC_INPRG. I want to do this for all 5 values. Once the rows are in their respective sheets I want to filter them based on a formula and then sort from oldest to newest. I dont want the file to be too big and I think that VBA is the way to do it. I am new to VBA
View 6 Replies
View Related
Jan 27, 2014
see attachment below for easier comprehension of what I need to be done. Note that I have around 20 subjects (2 in example) and about 15000 values per subject (5 per subject shown) Basically, I want matching rows to be aligned (see grey) and non-matching rows to be deleted, throughout the 20 or so subjects.
Exemple.xlsx
View 6 Replies
View Related
Jun 20, 2013
I've got an interesting problem which I haven't been able to find an answer for.
A B
PR Yes
PR Yes
PR Yes
DN Yes
DN No
DN No
I need to count how many unique values in column a have every row in column b the same value. So counting for yes values, PR would equal one but DN would equal zero.
I used this formula to find out how many unique files had yes values, now I need to find out how many files only have yes next to them.
=SUMPRODUCT(($B$2:$B$14="Yes")/COUNTIFS($B$2:$B$14,$B$2:$B$14&"",$A$2:$A$14,$A$2:$A$14&""))
View 8 Replies
View Related
Sep 15, 2009
I've been searching both here and on google but I've been unable to make use of any of the numerous suggestions and examples I've found to do this; given I'm right in thinking that this should be done with a vlookup!
I have a table in which different customers pay different prices for different products. C13 is a cell in which I want Excel to look up the correct value based on A13 and B13 (in this case C3).
I have no experience with lookup functions, which might be the reason why I can't get this to work. I bet it's pretty simple
View 9 Replies
View Related
Jul 1, 2009
I am using Excel 2007, and I'm stuck with this problem.
View 4 Replies
View Related
Aug 11, 2007
Is it possible to count unique values in one column based on that column and another column? I have a report that has a column of dates (B:B), column of month and year (C:C), and a column of RMA numbers(A:A). The RMA numbers repeat if there is more than one part on the RMA. I would like to count the number of RMA created each month. Below should be Jan = 2; Feb = 2; Mar = 1............
I have a CSE formula that allows me to count based on two criteria but it does not count unique values and you have to specify the two criteria.
View 4 Replies
View Related
Feb 19, 2009
I'm facing a big problem and I can't found a solution for days.
I'm trying to count/sum unique values in a Range, base on a criteria excluding Blank cells. Basicly I'm using the Formula Below:
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))
Let me Put to you an example for you been able to understand my problem.
Example considering Range "C2:C20" exluding blank cells
(1) - To count unique values
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&""))
(2) - To count unique values based on criteria in range "B2:B20"
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E"))
(3) - To sum unique values on "E2:E20" based on same criteria
=SUMPRODUCT((C2:C20"")/COUNTIF(C2:C20,C2:C20&"")*(B2:B20="E")*(E2:E20))
They all work fine. But I need to insert a merge at Row 10 for
better reading purposes and the (2) and (3) are returning (#DIV/0). The (1) formula still work's.
I just don't know what to do guys ....
View 9 Replies
View Related
Dec 15, 2009
I'm having difficulty trying to write a formula for the following type of data:
[data] ....
This is a data set with 10k+ lines; I have about 150 different items in the "Criteria" column. What I want to do is count how many unique items occur in "Column to be counted" by each vairable in the "Criteria" column. The output should look like this: ...
View 9 Replies
View Related
Aug 21, 2014
Formula which will count unique values in column A based on condition in Column B which "y" .....
Show ranges as A:A instead of A1:A100 as I dont know the size of the table, it can be thousands rows .....
View 3 Replies
View Related
Jan 21, 2014
I have a large sheet (several thousand rows and growing) - see a small cut of the data. The columns following on from this have a list of people's names, hence why a lot of the data repeats (as a number of people attended each program).
Program
Clinic Title
Start Date
[Code].....
formula that will automatically give me that answer?
View 2 Replies
View Related
Dec 18, 2013
I have a table like this:
Category 1
Category 1 Topic 1
Category 1
Category 1 Topic 1
Category 1
Category 1 Topic 2
I'm trying to pull each Category once out into 1 column, and each of it's Topics once in another column.
View 5 Replies
View Related
Apr 3, 2009
i had a database from which i need to extract data from COlUMN B, select the
View 2 Replies
View Related
Oct 9, 2012
I have a workbook with about 10000 rows of data for about 100 suppliers in Sheet1 and about 15000 rows of same Suppliers payment details in sheet2.
What I am doing now is:-Filter every supplier names in Column A of sheet1, copy all the rows and paste in sheet1 of a new workook & Again copy the Payment details of a same supplier from master file sheet2 and paste the same in sheet2 of this new workbook then save the files with the supplier name as file name in my documents folder code, that filters each suppliers data from sheet1 & 2 and paste in new workbook sheet1 & 2.
View 1 Replies
View Related
Mar 18, 2013
I've got two columns, one with policy numbers, the other with error codes.
A policy could be in the list more than once, so I'm counting the number of unique policy numbers with the function
=SUM(IF(FREQUENCY(A10:F10000,A10:A10000)>0,1))
I want to count the number of errors that are NOT code 00 or code 21. Because the error codes are saved as text, I'm counting the number of errors with
=SUMPRODUCT((B10:B10000"21")*(B10:B10000"00")*(B10:B10000""))
The problem is that since a policy number could be listed twice, when I count the errors, I might be counting the same policy as an error twice. This means that I could feasibly end up with more errors than I have unique policies, which doesn't work.
What I'd like to do is only count the number of errors that have unique policy numbers. That is, I only want to count an error the first time it is in the list, based off it's policy number. Is that possible?
Here's my sample data: [URL]
View 9 Replies
View Related
Jul 27, 2009
I need to count the unique values in a list based on another value. i.e.
AB ___ Jones
AB ___ Smith
BC ___ Henry
AB ___ Jones
BC ___ Brown
BC ___ Henry
AB ___ Tomkins
For all the AB's in column 1, I need a formula that will give me all the unique names from column 2, in this case 3. I've tried adapting:
=IF(LEN(June!D5:D100),SUMPRODUCT(1/COUNTIF(June!D5:D100,June!D5:D100)))
but haven't been able to get it to work.
View 9 Replies
View Related
Aug 22, 2009
I am trying to copy two cells from one worksheet to another in the same work book based on the value in Column B of one of the sheets. This is just a building block to a larger script I am going to create.
Below is my attempt but I keep getting an error at Range(Cells(x, 3)).Select.
View 7 Replies
View Related
Feb 22, 2011
I'm having a problem with a spreadsheet in Excel. I have in column terras, codti problem and several cells that are repeated. I'm stating that terra appear only once, the information in column each issue should appear in different columns with the sum of how often they appear and codti according to terra.
In excel is best illustrated what I mean!
In total, 5267 lines and need to do this with all. You can do this in excel?
View 4 Replies
View Related
Oct 24, 2013
The old thread is here: [URL] ....
There are three sheets in the workbook, Project, Tasks and Details and the expected resulting sheets are RESULT, In_Tasks_but_NOT_in_Projects and In_Details_but_NOT_in_Projects .
But now what I am looking for:
1. Copy the Projects data as is in the RESULT sheet.
2. Then in the Tasks sheet, if the ID matches paste the matching rows under the data from Projects (as in the result sheet with Orange colour)
3. If the ID is present in Tasks but NOT in Projects then copy it into the In_Tasks_but_NOT_in_Projects sheet.
4. Then If the ID and the Name in the Details tab matches with the data in the RESULT sheet then paste it under the ID and Name (as in the result sheet with Green colour)
5. If the ID does not match the ID in the results sheet then copy that row into the In_Details_but_NOT_in_Projects sheet.
The result of the current macro that RHCPgergo worked with are in the last sheet.
The formatting and colour of the rows doesn't matter, it is more of nice to have.
View 14 Replies
View Related
Jan 27, 2014
I have a spreadsheet that lists employees and their certifications. If an employee has multiple, then they will show up on as many rows as they have certifications.
The macro I have merges them into one row with a line break, but only the first column's unique value has been merged while the other columns containing their own unique values are duplicated when I want them to show up only once. Example: Jane Doe shows up 2 times on the report. Her name should only show up once on the row, not 2 times with a line break.
Here is the code. I have also attached an example of what I need. Because the attachment is a simpler version of the actual report, is it possible to specify which rows have the unique values and which ones don't?
View 2 Replies
View Related