Copying Data From Main Worksheet To Another

Apr 11, 2012

I have a main spreadsheet that lists all the members and profile URLs for members in a forum. In Sheet 1, Column A is the username and Column B is their profile URL.

In sheet 2 I have a list of the members who are in listed in a particular category in the forum. However, I don't have the profile URL data. What I want to do is create a macro that look in Sheet 1 for the username and if profile URL is thier, copies that into sheet 2 next to the appropriate username.

View 1 Replies


ADVERTISEMENT

Copying Specfic Data From A Main Worksheet To Several Breakdown Sheets.

Oct 21, 2009

I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. Iím currently manually recording some formatting macros because I havenít learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance

The information I would use to copy the rows to other sheets is going to be based on (A2).

Anything that starts with U65 would go into the U-65 tab.
1,7 or 8 would go to the lockbox tab.
2 or 5 = IN-HOUSE
3 = WIRES
4 = DATA OCEAN
Eh, WH, or WE = ACH

Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.

View 5 Replies View Related

Copying DATA From Main Sheet Into Different Sheets

Mar 25, 2014

I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.

View 8 Replies View Related

Distribute Data From One Main Worksheet To Several Other Worksheets

Jan 6, 2010

I am in need of an Excel Macro to help me create an address list by market. For simplicity sake Iíll set up a mini-example: I have an Excel document with a MASTER tab that lists the Market (Column A), a personís name (Column B) and their Phone number (Column C). What I need to macro to do is read column A and make a new tab for each market in that column, then populate the name and phone fields accordingly.

A found one macro that was close, but it does not automatically make a new tab (I have to do that manually) and it does not refresh the sheet each time I open it, so when I run the macro again I get duplicate entries.

View 13 Replies View Related

Pulling Data From Multiple Worksheets To Main Worksheet?

Feb 26, 2013

I am building a workbook for small group of people in my office to use. I have 7 tabs, the first one is called Main Sheet and the other tabs are the names of each person using the excel workbook. Every tab looks the same, I have the columns labeled: date - job number - job name - contact # - comments

My desire is that each person will be able to input their data on their tab as they receive new jobs, and the main sheet will be a compilation of everyone's sheet. So to clarify, as new information is added to one tab this entire row of information will automatically be added to the next available spot on the main sheet. We are all on the same server so we can all work off the same file. Is this possible to accomplish?

View 2 Replies View Related

Sort And Filter Autosum And Copying To Main Spreadsheet?

Apr 14, 2014

I have a cashflow spread sheet on which there are three properties that are currently being renovated and are being rented out. I would like to see ongoing costs for each individual property on the main spread sheet. I can filter and sort by the properties and autosum to get the individual costings of properties, but I would like to be able to see the costings of each property on the main spread sheet once I have stopped filtering.

View 1 Replies View Related

Transferring Columns To Another Worksheet Based On Entry In Main Worksheet?

Oct 17, 2012

I have an order form created in excel with a list of about 1600 products. I have a column set up for the customer to place the ordered amount of each product. What I need now is a way to transfer only the rows that have a value in the "ordered" column to a new sheet. I have seen it before , but don't know how it was accomplished.

View 1 Replies View Related

Copy To Main Worksheet From Many Worksheets

Aug 7, 2006

I went through your board and found the code below posted My Mr. Tom Urtis.
I tired it and it worked fine except that it needs another workbook.
Can it be changed to work in the same workbook to copy to a sheet named as Main from all other worksheets that I can chose?

Sub ImportDistricts()
'Instructional Message Box
MsgBox "Click OK to access the Open dialog." & vbCrLf & _
"Navigate to the folder path that contains" & vbCrLf & _
"the District workbooks you want to import." & vbCrLf & vbCrLf & _
"When you get inside that folder path," & vbCrLf & _
"use your mouse to select one workbook," & vbCrLf & _
"or use the Ctrl button with your mouse" & vbCrLf & _
"to select as many District workbooks" & vbCrLf & _
"as you want from that same folder path." & vbCrLf & vbCrLf & _ ....................

View 9 Replies View Related

Copying Data From Different Worksheet

Oct 15, 2009

The format of the data shown in sheet below is divided by '|' where it represents a cell divider.

Sheet1
-------
A | B | C
ClassA | ClassB | ClassC

Sheet2
-------
A | B
ClassA | Student01
ClassA | Student02
ClassB | Student01
ClassC | Student02
ClassC | Student03
ClassC | Student04

Sheet3 - Final Output
-------
A | B | C
ClassA | ClassB | ClassC
Student01 | Student01 | Student02
Student02 | | Student03
| | Student04

Sheet3 = check if there is a match between Sheet1 and Sheet2, if there is, then use Sheet1 as a header (ClassA, ClassB, ClassC) and paste the matched data under the respective header.

View 11 Replies View Related

Copying Data From Several Worksheets In One New Worksheet

Oct 19, 2009

I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.

View 4 Replies View Related

Copying Data From One Worksheet To Another Automatically

Jan 9, 2009

I have 2 worksheets that share some of the same data. However I do not want to have to populate the same information twice. Instead I want to be able to type the information required in the one worksheet and create an instruction for the data that overlaps with the second worksheet to automatically load. The catch is I need it to find the next blank row every time to add the data. EG

Worksheet 1 has columns: Name, ID Number, Date, Gender
Worksheet 2 has columns Name ID Number.

I want to be able to input data on worksheet 1 only and the the Name and ID number will be added to the relevant columns in worksheet 2.

View 2 Replies View Related

Copying Data From Active Worksheet Using VBA?

Apr 30, 2014

I have a code that I intend to use to retrieve 2 ranges from an active workbook (csv) and place those ranges in another named workbook. Both files are open during this procedure. The code I have is:

Code:
Dim rngA As Range
Dim rngB As Range
With ActiveWorkbook.ActiveSheet

[Code].....

The problem is nothing is displaying in Workbooks("data recorder template UTD Nodata").Sheets(".") I think that the code is not picking up the active workbook correctly but not sure.

View 2 Replies View Related

Macro - Copying Data From One Worksheet To Another

Jun 4, 2007

I want to write an excel macro for copying the data from one excel sheet to another. The data should be copied as:

- It should sort the data on column E.
- Then it should sort the data on the column N.
- Copy the resulting rows in the ĎResultí worksheet.

View 2 Replies View Related

Update The Worksheets Field Value Based On Updates Done In Main Worksheet.

Oct 8, 2007

How to Update the Worksheets field value based on updates done in Main Worksheet.
As i have two different worksheets (Which can be even more then 5) and i want to update the Column Field value of "State" in work sheet "B" & "C" based on the updates done in "State" Column Field value in Worksheet A.
I just want to update the "State" Column Field value in Worksheet "A" and it should update the "State" Column Field value in Worksheet "B" & "C". Only the criteria to match is Number. Based on number i want to search the values in Worksheet "B" & "C" and want that these values also get updated.

View 9 Replies View Related

Copying Row To Other Worksheet If Cell Has Specific Data

Jan 4, 2010

I have an Excel 2003 spreadsheet with multiple sheets - one main one with all data and others which have only the data that falls into certain criteria. I'm wondering if there's a way to enter the information on the main sheet and have it automatically populate the correct "sub-worksheet" depending on what is entered in a specific column.

I'm not describing this well but I've attached a sample of what I mean.

View 6 Replies View Related

Copying Rows Of Data Into Different Cells In A New Worksheet

Jul 31, 2008

http://www.excelforum.com/excel-programming/651452-copy-rows-of-data-into-a-different-format.html

Here is the problem:

I have a list of activities (each activity is one row of data). These will be input manually into Sheet2. (see attached file)

The activities then need to be automatically copied and pasted into Sheet1. However, the data is displayed in a different order than in sheet1. So I need some code which will run through a loop for each row of data and then copy and paste it into sheet1 until it reaches an empty row.

The cell positioning of each data set in sheet1 is equally spaced. VLOOKUP will not work for me here as I do not want any formulae or VBA script in sheet1. I cannot change the format of sheet1 as it is a company form.

View 9 Replies View Related

VBA Copying Data From Worksheet To Another Workbook When File Name Changes

Dec 18, 2012

I currently have a code that copies (when both workbooks are open) the status report tab from one workbook to another. So, my code copies the entire "Status" tab from Report.12102012.xlsx to Master_Report.xlsx.

But, there will continually be new Report.(DATE).xlsx files that are being made and I would like for my code to be able to search for the newest date "Report" spreadsheet, open it (so employee doesn't have to find the newest spreadsheet), and then copy the "Status" tab to my Master_Report.xlsx file.

All of the "Report.(DATE).xlsx" files will be stored in the same folder.

View 3 Replies View Related

Copying Data From Multiple Worksheets To A Master Worksheet

Jun 22, 2009

I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.

View 3 Replies View Related

Copying Data From Array To Some Specific Cells In Worksheet

Mar 7, 2007

I have created one-dimensional array and now I try to copy the data from array to some specific Cells in worksheet. But it seems impossible all the time!

Sheet2.Cells(56, 3 + m) = LossLocationInt(m)

NB: LossLocationInt(m) is an array containing value in it. But, this doesn't copy to the Sheet2.Cells(56,3+m). For clearness: the array has type variant

View 4 Replies View Related

Excel 2003 :: VBA - Only Copying Rows With Data In And Moving To New Worksheet

Oct 3, 2012

I am using Excel 2003.

I have 2 worksheets.

Worksheet 1 is called "Master List Data". Every cell within this worksheet contains a formula so that it matches the cell value contained in a worksheet held within another workbook.

The formula for reference is as follows:

=IF('[CCL Breakdown.xls]MASTER LIST - Active Customers '!A1="","",'[WFX CCL Breakdown.xls]MASTER LIST - Active Customers '!A1) .

e.g.

If Cell A1 on Master List-Active Customer contains no data, Cell A1 in Master List Data would be blank.

If Cell A1 on Master List-Active Customer equals John Smith, Cell A1 in Master List Data would display John Smith.

There are currently non-blank values contained in cells A4:A750. But next week there may be non-blank values is cells A4:A790 (i.e. it will grow each week)

Worksheet 2 is called "Master List Flat. At the moment, I am manually copying and pasting the rows which have non-blank values in cells from Column A from Worksheet 1 into this report (e.g. A4:IV4).

I would like to automate this process and I have created a Macro, but I do not know how to word it so that it will only copy cells with actual data in.

The Macro I have written is below:

Sub IMPORTANDFLATTENDATA()
'
' IMPORTANDFLATTENDATA Macro
' Macro recorded 01/10/2012 by walesb
'
'
Application.ScreenUpdating = False
Sheets("Master List Flat").Select
Rows("4:759").Select

[Code]....

View 1 Replies View Related

Automatically Copying Data From Master Worksheet To Other Worksheets In Same Workbook

Mar 14, 2014

I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.

View 9 Replies View Related

Autofill Data In Tabs Based On Data From Main Tab

Dec 29, 2013

My main data tab is collecting gallons pumped for a particular piece of equipment. I have a drop down box to populate the piece of equipment and VLookup to identify the unit number associated with the equipment. I would like to create a separate tab for each piece of equipment that will track the number of gallons pumped during the calendar year. Here is the format for the main tab:

DateBeginning Meter ReadEnding Meter Read GallonsEquipment IDEquipment Description

1/2/2014565443565625 18212006 ford f250
1/10/2014565625565675 5022006 Chevy 2500
1/11/2014565675565750 754Ford Taurus
1/12/2014565750565830 8012006 ford f250
1/13/2014565830565900 7012006 ford f250
1/14/2014565900566000 10012006 ford f250
1/15/2014566000566125 12512006 ford f250
1/16/2014566125566215 9012006 ford f250

Here is the format for each piece of equipment:

2006 Ford F250

Date Gallons
1/2/14 182
1/12/14 80
1/12/14 80
1/12/14 80
1/13/14 70
1/14/14 100
1/15/14 125
1/16/14 90

The formula I used in Cell A4 is =INDEX(Gasoline!A4:A23,MATCH(1,Gasoline!F4:F19,FALSE),1)

Cells A4 and B4 have the correct values. My problem comes in A5,A6 and B5,B6. These should not have a result because they are different pieces of equipment. Throughout the year, each piece of equipment is going be used on the main tab. How do I keep the individual tabs from picking up the same entry multiple times.

View 2 Replies View Related

Extract Data From Main Sheet To Other Sheets

Mar 29, 2009

I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done

I have a detailed sheet called "detail"

I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"

The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.

I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy

I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that

View 9 Replies View Related

Split Of Main Data Based On Column Into New Worksheets?

Apr 4, 2014

spliting of main data By column criterias which start from column E1:L1 something like Pivot Table in new worksheet, but based on formula functions.Each worksheets have to based in one of this column D1:K1 headings. That also have to rapidly change with main data table.

View 9 Replies View Related

Populate Data From Multiple Worksheets Into Main Report

Aug 3, 2014

I have to create a report that captures the work of 2 different resources on each day of the month, the sheet i am working with has 3 tabs - Main (this houses the main report, with identical fields for each resource), ABC - for details pertaining to work done by the resource ABC ... and a tab called XYZ for details of work performed by XYZ. A resource can work on multiple projects and 3 different modules in one day.

So for each date, i need to bring in the details for columns .. Project Name upto the column # of FB's, for each resource that is for ABC and XYZ.

I have attached a file with sample data, it has the main tab with what it looks like before the data is pulled from the ABC and XYZ tabs ... and what it should like after the required data has been pulled from the ABC and XYZ tabs.

What i am looking for is the formula that i got to enter in the main tab in order to pull the required data from the ABC and XYZ tabs for each date mentioned in each of the columns for each resource (that is ABC and XYZ) in the main tab.

View 3 Replies View Related

Copy Data From Multiple Sheets To Main Datasheet?

May 6, 2014

I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.

I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.

The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved

Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.

The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3

F-S886 (Material Properties Database)_DRAFT_5.xls

View 7 Replies View Related

Data Matching And Import Function From 2 Workbooks Into Main

Aug 25, 2007

Im creating a cash reconciliation application for a BUS operator client that has 6 depots and 1500 drivers.

each driver is uniquely identified by a special number.

long story short, I get 2 workbooks (named Cash1 & Cash2) that I need to have imported by driver number in my main cash rec workbook named Cashrec.

for example; ...

View 9 Replies View Related

Copying And Pasting Cells From A Worksheet Into A List Format In Another Worksheet

May 18, 2006

I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.

Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.

List of target columns in sheet 'Final' and source cells in sheet 'Source':

Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount

So basically I'm creating an entry for every amount in the table.

View 9 Replies View Related

Pulling Data From Main Sheet To Subsequent Sheets In Workbook

Jul 25, 2014

What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information

Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total

As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.

Ticket #DateDelivered ToTons

how I might accomplish this in a usable format for what I am trying to do.

View 2 Replies View Related

Display Data From Sheets Based On Value In A Cell On Main Sheet?

Apr 29, 2014

I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:

A B C D E
1 Query:
2 Fruit Store Cost Mode Date

And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014

... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved