How do I go about copying rows starting at A1 and counting down until there is a blank row in VBA?
I.e.
Row 1 - value
Row 2 - value
Etc etc
Then Row 13 is blank
I just want to copy all the data above the blank row, which I will then paste on another xls?
I have 2 columns of data E and F. Column E has 11 different words that randomly repeat, Column F has 10 years of dates, about 1,000 entries (10/11/12 format). Both columns values come from formulas.
I am trying to copy cells E & F to columns K & L starting in row 2 only if there is is data in column E (one of the 11 words) and skipping all others rows. Both the E & F values of tthe row must be copied together, i.e if text is in E45, then copy E45 and F45 into column K and L starting with K2 & L2. This is a task which will be repeated multiple times as data is replaced in columns A-D.
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
i am trying to copy specific cells for mutiple worksheets and past them into a summary page. i can get that to work but not all the cells on all the sheets are populated and i cant get the blank cells to be pasted to the summary sheet so that each sheet has 31 entries.
View 6 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I have a table with over 12,000 rows in it. In one column I have activity and the next a name.
A B
Walk John
Run Harry
Sleep John
*blank* Harry
Eat Percy
*blank* John
*blank* Harry
Reading Tom
So *blank is completey blank and that means Harry also put time to sleeping, and again John and Harry both put time to eating. How can I make the blank cells auto populate with the data from the entry above it?
I have a master sheet and 20 sub sheets. I input data in the master and it filters through to the 20 subs and calculations are done. the problem is that on the master there are blank cells, that need to remain blank cells until i put the data in. This data is copied to the subsheets using a =sheet1a1 type of formula. what happens is when a blank cell is copied it appears in the new location as a 0. I need this to remain blank as the 0 causes calculations that I don't need and mess up a lot of the data I need. Is there a way that when it copies the new location remains blank until the data is inputed in the master sheet?
View 7 Replies View Relatedi have 2 worksheets. Worksheet A has 100 rows on it with information in the first column. However, there are many blank rows e.g
Column A
1
2 matt
3
4 simon
5 paul
6
7
8 mike
9
10
11
12 john
what i need to do is transfer this to worksheet B without copying accross the blank cells, Now the main problem is i want the cells to be linked so i need a formula that finds the next cell with data in it to go in the next cell down. So worksheet B will look like this:-
Column A
1 Matt
2 Simon
3 Paul
4 Mike
5 John
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies View RelatedI am trying to insert a blank row into a table (created using the table function in Excel 2010) without the copying the formulas. Every time I insert a row the the formula is copied.
View 3 Replies View RelatedI'm not great anyways with VBA Macro.Effectively, here is my issue. I have a spreadsheet which is really badly designed.In one column I have multiple numbers separated by a comma. I need this data separated into new individual rows, but at the same time, copying the data in the other columns in that row to the new row.
Example of what I have:
Test 1 54 email1
Test 2 32, 343, 63, 34 email2
Test 3 4934, 5342 email 3
What I need:
Test 1 54 email1
Test 2 32 email2
Test 2 343 email2
Test 2 63 email2
Test 2 34 email2
Test 3 4934 email3
Test 3 5342 email3
I have have the following code below which paste everything into a new column and into a new row, but the problem I have is that it does not push the other rows data down, nor does it copy the 1st rows data (for that data set) into the new rows created.
Code:
Option Explicit
Sub Macro1()
Dim fromCol As String
Dim toCol As String
Dim fromRow As String
Dim toRow As String
Dim inVal As String
Dim outVal As String
[Code] ........
The amount of rows I have, so this manually (text to column, then transcoding etc) it out of the questions (i have 1000 rows of this!)
I would like to have my macro code search column A (supplier numbers) and split the rows into groups of rows of 5 or less and then insert 3 blank rows between each group of rows. The split needs to start on a new supplier number and cannot split a supplier number into two different groups. Here is a sample:
Supplier
Invoice Date
GL Date
Invoice Amt
[Code].....
I am working in the attached spreadsheet. For anyone who does not wish to open the link, let's say these sheets are titled 'Sheet1' and 'Sheet2'.
Sheet2 looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
[Code]....
Now, how may I pull this data into a summary sheet (Sheet1) that skips over any instances where column A ("Year") is blank so it looks like this:
Year Cat Name
2013 4 Sal
2013 4 Pat
2013 3 Pat
2013 2 Pat
2013 5 Bob
[Code]...
Note: All columns are the EXACT same across each sheet(including Sheet1, Sheet2, Sheet3), if that extra piece of information works.
PS It is fine if, in order for a formula to work, I need to copy and paste the formula for the length of rows per each Sheet to consolidate.
EDIT:
So, in my industry, any summary-level data (shown on Sheet1) must have a linked reference to a particular sheet (Sheet2, Sheet3, etc.) so the user knows where the raw data came from. This is to ensure increased accuracy of data and minimize human error (like, if for example, I accidentally didn't copy and paste all the rows correctly).
I have uploaded the actual sheet to show what the data actually look like. I am trying to pull in 2013 data into my "Summary Page" and would like to have all the data linked to the '2013' sheet but skip any blank rows.
Here is my failed formula:
=INDEX('2013'!F$3:F$338,SMALL(IF('2013'!$E$3:$E$338<>"",ROW('2013'!$E$2:$E$338)-ROW('2013'!$E$2:$E$338)+1,ROWS(B$1:B1)),""))
I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code:
Sub test()
Dim j As Long, r As Range
j = InputBox("type the number of rows to be insered")
Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.
i have this code which inserts blank rows in alternate rows,
Code:
Sub insertrow()
' insertrow Macro
Application.ScreenUpdating = True
Dim count As Integer
Dim X As Integer
For count = 1 To 20
If activecell.Value "" Then
activecell.Offset(1, 0).Select
[code].....
what changes should i make in this code to insert rows only when ther are now blank rows. So first time i run, blank rows are already there, and when i update some data at the bottom and re-run it inserts blank rows again.
I have this in Column A, with about 120 entries:
Company 1
Contact 1
Address 1
City, ST, ZIP 1
Phone 1
Fax 1
Company 2
Contact 2
Address 2
City, ST, ZIP 2
Phone 2
Fax 2
Company 3
Contact 3
Address 3
City, ST, ZIP 3
Phone 3
Fax 3
I want this:
Company 1 Address 1 City, ST, ZIP 1 Phone 1 Fax 1
Company 2 Address 2 City, ST, ZIP 2 Phone 2 Fax 2
Company 3 Address 3 City, ST, ZIP 3 Phone 3 Fax 3
all the way down.
I can't figure out how to record the macro to tell it to then skip the blank line, collect the next set of data, and put it in the next row. I can do it for two, but then it just replaces the first two with the next two and I lose data.
Using excel's text to speech I've put together a basic spreadsheet.
[URL]
Code:
Function talkit(Speech)
Application.Speech.speak (Speech)
talkit = Speech
[Code]....
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I have a worksheet used for inventory. In Column A is the quantity (to be entered manually). In Column B is the product description. In Column C is the price of the product, and Column D the total price (column C price x the quantity entered in Column A). At the bottom of the worksheet is a grand total. Also, Column B (products) is grouped into subheadings by the supplier each product came from (for example, row 6 has the title PPG, and then rows 7-137 list every product from PPG).
The calculations in this worksheet work fine. What I am trying to do is, using a macro once all of the appropriate quantities are entered in column A, automatically hide every row of product that does not have a quantity. The tricky part is, if no products under a given supplier subheader are entered, the subheader also hides, and if a quantity is entered, that subheader shows. For example, if I have no quantities under any products for PPG, then the PPG subheader hides, but if just one quantity is added, PPG shows. Also, this list will be constantly updated, new products will be put in and taken out all of the time, so I cannot base the macro on a specific number of rows.
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies View RelatedI have the code below that clears colums B-J and L-N in whatever row you activate a cell in. When a row gets cleared, how do I shift all the other rows up to eliminate blank rows in between the data real-time? I've deactivated the cut function already since this messes up references in the worksheet, so it would have to only use copy, paste, and clearcontents functions. Also, I don't want to DELETE any rows, just essentially shift the blank rows to the bottom. So when a row is cleared, all others shift up and the blank one goes to the end of the data that is available for data entry, so rows 17 to 116 are always available. But it must check to make sure that B-J and L-N are ALL blank, otherwise some wanted rows with one piece of information might get cleared. So at any given time, my range will always go from row 17 to 116. This is Excel 2007. Here is the code I have to clear rows that can be built upon.
View 14 Replies View RelatedI have an excel sheet that has the A column populated with many different things.
I'm not sure how possible it is, but I'm trying to group everything up by 7s and putting a space in between the groups.
So...
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
Would turn into
ABCDEFG1
ABCDEFG2
ABCDEFG3
ABCDEFG4
ABCDEFG5
ABCDEFG6
ABCDEFG7
HIJKLMNOP1
HIJKLMNOP2
HIJKLMNOP3
HIJKLMNOP4
HIJKLMNOP5
HIJKLMNOP6
HIJKLMNOP7
QRSTUV1
QRSTUV2
QRSTUV3
QRSTUV4
QRSTUV5
QRSTUV6
QRSTUV7
I have a macro which I have been successfully using for a while and it's served me well. But now I have far too much data on my source file (55-60k rows) and I only need data the data if Column C is "AB". I'm the first to admit that I know nothing about macros.
If anyone can tell me how to make this only copy the rows where Coulumn C is "AB".
Do While fn ""
If fn ThisWorkbook.Name Then
With Workbooks.Open(myDir & fn)
With .Sheets("3-Queues by Agent").Range("A1:R60000")
ThisWorkbook.Sheets(5).Range("a" & Rows.Count).End(xlUp)(2) _
.Resize(.Rows.Count, .Columns.Count).Value = .Value
End With
.Close False
End With
End If
I have to copy the formatting from "rows G&H" for 40,000+ lines. Is there an easier way than doing the formatting then highlighting the first two cells (G4 and H4) then dragging the bottom right hand corner down 40,000 lines?
View 5 Replies View RelatedI have a spreadsheet (see attached) that has city names, accessories sku number and quantity sold for each week. I run this report every week and when the spreadsheet has empty rows which I delete, but there are some rows that also have partial data that can be deleted. Anyway, I would like to copy name of first store (los Angeles) in this sample and copy down till the next city comes up (San Diego) and do the same all the way down. I have total of 20 stores and I wondering if you guys know of a formula or vba code that could help me with this.
View 9 Replies View RelatedFor example, I have an excel worksheet which has a main "master" list that has all of the cars that are sold along with the name of the salesperson who sold it all the way to the right (Column 6)
What i am trying to accomplish:
I would like excel to automatically take all of the rows which have the same salesperson name in column six and sort them into separate sheets, but i would also like these rows to automatically update if information is changed in them or if they are deleted on either the salespersons sheet or the master sheet.
I have a workbook into which a number of rows will be imported (a variable number). These will be edited then I want all the rows to be stored in a ever growing database. At the moment I simply copy these rows open a second workbook and paste the rows into the first blank row in the second sheet.
Is there a way to do this automatically.
1) select and copy all rows containing data
2) open second workbook & find first blank row
3) Paste data into second workbook
4) Save and close second workbook
I think with some effort I could manage the copying and pasting but I have no idea how to open and close the second sheet automatically.
i am trying to copy rows from several worksheets into one master worksheet. if column F of any row has a value greater than zero then the rows should be copied to the master worksheet with all data.
View 5 Replies View RelatedI am trying to copy rows that contain a specific word from one worksheet to another.
View 9 Replies View RelatedI'm working on a project requiring the matching of data from multiple worksheets and got some useful advice from someone on here a few months ago to get it up and running.
At the moment I'm using SUMPRODUCT with an IF argument to check rows on one sheet for matches on 5 others and return a "Yes" or "No" value, which is working fine. The next bit of analysis however requires copying the value from another column on rows that match, and pasting it into the first sheet.