Stop Blank Cells Copying To 0
Feb 24, 2014
I have a master sheet and 20 sub sheets. I input data in the master and it filters through to the 20 subs and calculations are done. the problem is that on the master there are blank cells, that need to remain blank cells until i put the data in. This data is copied to the subsheets using a =sheet1a1 type of formula. what happens is when a blank cell is copied it appears in the new location as a 0. I need this to remain blank as the 0 causes calculations that I don't need and mess up a lot of the data I need. Is there a way that when it copies the new location remains blank until the data is inputed in the master sheet?
View 7 Replies
ADVERTISEMENT
May 24, 2014
I have a spreadsheet with data in 7 columns. Columns A-d have one line of data in them but the other 3 columns have more than one line.
How do I write a macro which will copy the first row of the first 4 columns down until I reach an empty row?
View 2 Replies
View Related
Dec 12, 2006
i am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies
View Related
Aug 1, 2014
I have a VBA code that when activated it copies 6 cells from sheet1 to the next available row in sheet2 - A2:F:2.
alerting and stopping the routine if any one of the cells in sheet1 are empty so the user has to input into all cells before the routine will execute.
does it need a check cells for content if error highlight empty cell.
View 7 Replies
View Related
Dec 7, 2009
i am trying to copy specific cells for mutiple worksheets and past them into a summary page. i can get that to work but not all the cells on all the sheets are populated and i cant get the blank cells to be pasted to the summary sheet so that each sheet has 31 entries.
View 6 Replies
View Related
Jan 25, 2010
I have a table with over 12,000 rows in it. In one column I have activity and the next a name.
A B
Walk John
Run Harry
Sleep John
*blank* Harry
Eat Percy
*blank* John
*blank* Harry
Reading Tom
So *blank is completey blank and that means Harry also put time to sleeping, and again John and Harry both put time to eating. How can I make the blank cells auto populate with the data from the entry above it?
View 3 Replies
View Related
Apr 22, 2006
i have 2 worksheets. Worksheet A has 100 rows on it with information in the first column. However, there are many blank rows e.g
Column A
1
2 matt
3
4 simon
5 paul
6
7
8 mike
9
10
11
12 john
what i need to do is transfer this to worksheet B without copying accross the blank cells, Now the main problem is i want the cells to be linked so i need a formula that finds the next cell with data in it to go in the next cell down. So worksheet B will look like this:-
Column A
1 Matt
2 Simon
3 Paul
4 Mike
5 John
View 3 Replies
View Related
Apr 2, 2014
I have between 1 & 10 values on column A, which are distributed throughout the column. They are inconveniently at the bottom of the set of data which they are related to.
Solution I'm hoping for:
-Starting from last row that contains a value-
-Copy that cell upwards until it runs into a cell that contains a value-
-Then stop copying that cell, pick up the new value, and then copy the new cell value upwards-
-Stop at A2.
View 4 Replies
View Related
Nov 1, 2006
I am trying to cut/paste a row of formulas in my spreadsheet. The problem is that I want some of the referenced cells in the formula to stay CONSTANT and not increment on each new row. In this example, I want the references to row 17 (F17,E17) to increment (E18,E19,...), but I want the "G7" reference to remain hard coded (as G7) on each row I paste (because that is where my master value is). (The formula is working fine) =IF((F17>0),IF((F17<=G7),E17,0),0)
View 3 Replies
View Related
Jun 6, 2012
Excel 2007.
I have conditional formatting set up so that the cell becomes highlighted if it contains a specific text.
Example of wanted conditional formatting:
Conditional formatting rules manager
Rule
Format
Applies to
Stop if true
[Code] ......
For some reason this formatting is inherited by another adjacent cell as we continue to input information.
For example:
Column M is formatted so if 'AP' is placed in any cell in that column the cell fills pink. As more information is inputted into the sheet, the conditional formatting copies to Column N. It does not happen with every entry and I have not been able to isolate the specific steps to recreate the copying. Multiple people use the same sheet and fill it out and needed.
After working with the sheet changes are made to the "applies to" column without people meaning to.
For example:
Conditional formatting rules manager
Rule
Format
Applies to
[Code] .......
I would like to make this formatting so that is only applies to the Column M and not "travel" to other cells of the sheet.
View 2 Replies
View Related
Nov 9, 2009
The code down below counts all cells from column A2 to I11. The problem; the code should stop counting if there is a blanc cell in a column and go to the next column to countinue. My query; how should the code be modified so it will stop counting if there is a blanc cell.
View 4 Replies
View Related
Dec 1, 2006
I tried to reduce the size of the printing area by deleting the blank rows. To achieve this I entered VBA code that appeared in the newsletter issue 3 after slightly modifying the code suiting to my need. But, while exeucting the code with all the parameters, xlCellTypeBlanks, xlCellTypeFormulas,xlErrors, the error as shown as a screen shot herein is populated. But, with the parameter,""xlCellTypeBlanks"" all the Blank Rows only got deleted and similarly only those rows containing Formulas are deleted, while the parameter is""xlCellTypeFormulas".
I want all the cells that contain xlFormulas, xlErrors and xlCellTypeBlanks as well be removed while executing the code given herein. But, if the range contains "xlFormulas" and "xlCell TypeBlanks", the rows containing blank cells are not removed and vice versa.
View 2 Replies
View Related
Mar 27, 2007
the following macro works great if there is data below cell O4. but is there isn't any (e.g., at the beginning), then the cursor runs down to 65,536. ?if no data exists, how can i stop at cell O5...
Range("o4").Select
'Range(Selection, Selection.End(xlDown)).Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Activate
View 2 Replies
View Related
Nov 14, 2006
I have workbook that has questions on column K and L that NEED to be answered. When the user closes the spreadsheet I need the macro to create a pop up that says "unfinished Workbook"
So I need a macro that tells the user to finish answering the questions on K and L -
View 5 Replies
View Related
Mar 25, 2014
I need a macro to go through one column until it hits a blank cell and stop... the criterea of the loop:
if cell = "Multi" then **Move to X tab** else **move to X2 tab**
View 1 Replies
View Related
Dec 12, 2007
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies
View Related
Aug 8, 2007
How do I go about copying rows starting at A1 and counting down until there is a blank row in VBA?
I.e.
Row 1 - value
Row 2 - value
Etc etc
Then Row 13 is blank
I just want to copy all the data above the blank row, which I will then paste on another xls?
View 9 Replies
View Related
Jan 13, 2014
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
View 4 Replies
View Related
Mar 19, 2013
I am currently working in an excel file for which i want to create a macro. I am using colomn F as the base from which it should be determined whether a row should be copied. In colomn F the user can select three options through data validation. If 'completed' is selected, the whole row should be copied to the second sheet, and each copied row should be pasted to the next empty row. The data on the source sheet starts at row 11 and should be copied to sheet 2, starting from row 11 as well.
View 5 Replies
View Related
Mar 15, 2013
I am trying to insert a blank row into a table (created using the table function in Excel 2010) without the copying the formulas. Every time I insert a row the the formula is copied.
View 3 Replies
View Related
Aug 2, 2014
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies
View Related
Apr 17, 2008
I have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies
View Related
Jul 15, 2008
I can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
View 14 Replies
View Related
Mar 12, 2014
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies
View Related
Mar 22, 2014
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
View 10 Replies
View Related
Feb 21, 2006
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
View 14 Replies
View Related
Feb 27, 2013
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
View 2 Replies
View Related
Nov 17, 2008
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
View 9 Replies
View Related
Dec 13, 2006
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies
View Related
May 29, 2014
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
View 14 Replies
View Related
