How to count the hours using Excel cells (for time table scheduling)....for example : 11:00-9:00 is 10 hours, "OFF" is 0 hour, "X" means 0 also, 10:00-7:00 is 9 hours, and so on. But when I try to put the hours, they show ###### in the cells? I know the time table is mixed with numbers and letters, that's why I'm confused to use any formula to do it, but my boss told me NOT to change the original format what so ever.
View 14 RepliesA1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
i have one Q??
i have these times
07:00
07:43
04:55
07:43
is it possible to COUNTIF the repeated hours? the result should be 3 "07:??"
I am working on a spreadsheet where I want to count the number of calls to our service desk between specific hours (ie. 6:00 a.m. - 7:00 a.m.) up through 8:00 p.m. I have looked at all the forums and tried all the formulas that seemed to be what I was looking for and it isn't working! I am adding the information to a summary spreadsheet from which I am gathering the information from other sheets in the workbook. This will be an ongoing spreadsheet done weekly for every month.
Examples: I need to know how many calls from these times on a summary sheet.
6:23
6:28
6:59
7:09
7:35
7:38
8:00
8:26
8:34
8:42
8:43
9:02
9:04
9:23
9:27
9:31
10:06
10:23
10:37
10:51
11:05
11:09
11:19
I have to count the number of hours within a cell which has also dates. Example below.
12/03/2014 04:00
12/03/2014 04:00
13/03/2014 07:00
What is the formula to count the number of hours given the date ranges need to be in the same cell and the dates and hours are likely to change ?
I am trying to count hours where calls are received between 8am and 5pm Mon-Fri. If just one call is received between 8am and 5pm Mon-Fri then only one hour would be counted. Calls in excess of one call in the same hour do not count more than one. So if two people called from 8am - 9am then that would equal 1 and if on call came in from 9-10 then that would also be 1. Attached is a sample output.
View 11 Replies View RelatedAs you can see on the example i have TEST hours.xlsx, I have a file that calculate the money every doctor should take based on the working hours.
Nights, holidays and holiday night have different price/hour.
The excel is working fine…but now I have to make a formula that separates automatically based on the beginning time and the end time of the doctor’s shift the day hours tha night hours, the holiday hours and the holiday nights hours.
In the excel I have fill the hours Manuscript, I need a formula to do that for me…
On the yellow cell I have try to find out the formula for the holiday hours but because the day is calculated due to a formula it is not working!!!
Simple Example: A doctor Is working from 21:00- 8:00 (next morning Sunday) he should have 1 simple hour (21:00-22:00) 9 night hours (22:00-6:00) and 2 holiday hours (6:00-8:00,)
I have been trying to work out a formula for capturing the number of patients in the hospital at half hour time intervals. There are a lot of formulas for capturing this information within a 24 hour period however not a lot of information when the Length of Stay or episode time is +24 hours.
As you can see in my example spreadsheet below, some of the patients stay for 244 hours (row 9).
The outcome that I am looking for is that a 1 is placed in all of the time slots when the patient is there. For example if they arrive on Jan 1st at 2.15 and leave on Jan 3rd at 10.30 all of the time slots in between would have a 1 placed in them.
I have been playing around a lot and think it is probably only possible if you set it up as I have in the example i.e. by having the date running down and the time running across.
How this could work? I have tried SUMIFs and SUMPRODUCT formulas which generally work for Jan 1st but then go wrong for any date after that.
I have a sheet in which in Coloum A I have manager names, then in Colum B I have list of Employees reporting to that manager, then in Column C, I have total login time of each employee which should be => 8 hours. In a new sheet, I want to get the count of employees next to the each manager's name who login time is less then 8 hours.
View 3 Replies View RelatedIn column A I have a date AND time entered. By the way, this is not via cell format, I have manually entered, say today's date and the current time. In column B I have a future date and time.
Basically, column A is the date and time a problem was given to me. Column B would be the date and time I resolved the problem. Now for the formula....Column C needs to spit out whether the problem was solved between 24 and 48 hours OR less than 24 hours OR greater than 48 hours.
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie :
Difference between
02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
=TEXT(B15,"[h]")&" Hour"&IF(OR(TEXT(B15,"[h]")+0=0,TEXT(B15,"[h]")+0>1),"s "," ")&MINUTE(B15)&" Minute"&IF(MINUTE(B15)1,"s ",""))
I'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.
View 3 Replies View RelatedFormat Time Cell For Greater Than 24 Hours: Hours & Minutes Only .....
View 9 Replies View RelatedI'm having difficulty to calculate hours between 2 or 3 days exclude non working hours.
Attached is the example of start date with time & end date with time.
The situation is like "when the case log in till the case assist in working hours." so i will get the hours from case log to case assist.
Testing.xlsx
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
View 3 Replies View Relatedfind a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours
B3 = start time
C3 = end time
D3 = day hours workeds =24*IF(E10
I am making a schedule and I would like it to take out a 30 min break if the hours worked is over 6 hours.
I have so far
A B
1 11:00 7:30
=24*(B1-A1)
Gives me 8 hours, I would like it to subtract the 30 minutes only ifthe sum is over 6 and not alter the sum if it is under 6.
1) The output of an excel duration is : 22.00:8.00:25.00 ( day:hour:minutes ) - excel cannot average and work with this number format
2) resolution - =(LEFT(L2,4))+MID(L2, FIND(":",L2)+1,4)/24+MID(L2, FIND(":",L2,7)+1,4)/1440 as an array and Custom Format the cell as [h]:mm - works perfectly.
Q: to be conistent, the initial reporting is dd:hh:mm and then I convert to hh:mm so that excel can process the data. How can I convert from hh:mm to dd:hh:mm so that the excel report can be consistent in presenting the data to senior management?
example attached.
I am struggling to find a formula to calculate hour:minutes between the following:
Cell
A1= 04:00
B2= 17:00
I am wanting to calculate the hours between 06:00 and 16:00 and then the hours between 16:00 and 06:00 the next day
ie: 06:00-16:00 = 12;
16:00 - 0600 = 3
I am attempting to convert a spreadsheet of times (listed in the format 06:15:39.62, where 06 is the hour, 15 is the minutes, 39 is the seconds, and .62 is in truncated miliseconds) into fractions of hours (so, 6.25 [NOT 6:25!]). I've so far been doing it manually for each value, which is quite tedious (doing basic division of seconds and minutes into hours, to find the fraction) but I'd like a single formula which I can then apply to the whole spreadsheet.
View 2 Replies View RelatedI am trying to compute a running total of hours (from row 1) in row 2 Example................
As you can see, when the sum exceeds 24 (moving to the right across row 2) the answer resets, so to speak. Cells are formatted as time. This format *seems* incapable of recognizing quantities of hours over 24 except as days, as it were. This is obviously useful in most sorts of cases but not in this sort of case.
If I simply want the aggregate number of hours expressed as such am I doomed to failure whenever the total exceeds 24? In reply to a somewhat similar enquiry elsewhere in this forum, advice was given to format a cell as Elapsed Time. I dont see such a choice in my dropdown menu.
i need to convert second to Hours and mins and can do so using:
View 3 Replies View RelatedWhen I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedIs there a way to conver a persons time spent (given in weeks) to adjust/convert to show per month. Attached is the sheet. Do note that week 2/25 - 3/1 is a combination of Jan and Feb so hours should be logically divided into jan and feb...
Name 2/18 - 2/22 2/25 - 3/1 3/4 - 3/8 3/11 - 3/15 Feb mar
Tom 40 10 0 20 ?? ??
name
2/18-2/22
2/25 - 3/1
3/4 - 3/8
3/11-3/15
Feb
Mar
tom
40
10
0
20
??
??
I am trying to set up a time sheet for staff where it calculates hours worked in and outside of core hours. I can do a calculation to work out what they have worked in and out of core hours providing that part of their time starts of finishes in core times. The problem I am having is when some one works only outside core hours. Our core hours are 6am to 6pm. The problem is when they work from say 7pm to 1am. This is irregular work paid as overtime not shift work.
View 5 Replies View Relatedsee my attached sheet cotaining the following questions. in a day report sheet how should i count request matching the crateria of date and other conditions. in a monthly report a heavy conditional sum calculation which make slower sheets how can i make it faster.
View 2 Replies View RelatedI need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
I want is a field (e.g Large Parts Used) where I can enter in a number, then basically this number is subtracted from current stock field for Large Parts so I get an updated field of current stock on hand.
But what I want to do is once I've entered the number in the Large Parts used field, I can then clear that field but have the corresponding Current stock field to maintain what was last enetered.
E.g
Large Parts Current Stock = 50
(enter in) Large Parts Used = 2
Large Parts Current Stock = 48
(Clear field where 2 was entered into Large Parts used)
(Field still stays at Large Parts Current Stock = 48 although field where 2 was entered was cleared, so need it to save the information so can continually clear and re-enter amounts and have the stock continue to reduce)