Is there a way to count the times a loop has occurred and be able to present a running total in the status bar of MS Excel?
Code:
Sub Master_Phone()
'
' Select cell A2, *first line of data*.
[Code].....
[data] ....
Here I have 9 total requirements to be tested in any event. If I wanted to count the number of events passed it wouldn't be 7. See Blah2 it passed Design and Electrical. Separate Events yes, but only one requirement. I need to have a total could of 1 for that as passed. Not two. I'm comfusing myself because this inherited spreadsheet is over 1,000 requirements.
I need a formula to calculate how many months has passed irregardless how many days had passed. What I mean by that is if I have a starting date of 1/31/2010 and an end date of 2/1/28/2010, that should count as 1 month passed. I tried using the DATEDIF function, but that function is counting number of days, so if only 28 days had passed, that would not count as 1 month.
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
I am trying to figure-out how to set up conditional formatting of dates in a column (e.g. Date Submitted) and have these dates, and/or cell, change color as time progresses. I have Excel 2007.
For instance I have an application submitted on 11/20/2011 in a cell. I would like to have the date change color (Yellow) after 30 days have passed.
Then do the same except change to Red after 60 days have passed the date.
I searched the forums and did not find this particular problem. I of course may have missed it too...
My guess was to try "$A$1
I have some vba code that currently copies a status table out of a worksheet, into a temp file for an email. The status table in excel has a column D which can have different status. I want to select everything in the table except rows that are 'Descoped'. Currently my code looks like:
Set rng2 = Sheets("Execution Status").Range("B2:F420")
This picks up everything without looking at the status. I want to change it so it doesn't pick up the rows where Column D contains 'Descoped'.
In pseudo code I would describe it as:
Set rng2 = Sheets("Execution Status").Range("B2:F420") where value in D5:D420 is not equal to 'Descoped'.
I have tried:
Set rng2 = Sheets("Execution Status").Range("B2:F420").Value "Descoped" and nothing gets selected.
I would like to find out if I can have the values I selected in a two-column listbox and a one-column listbox in a userform shown in the status bar. It is possible to select more than one value in the list boxes, so the formula needs to be able to add the selected values.
View 2 Replies View RelatedI would like a message in a cell (eg, true/false) telling me if events are on or off. I think it means returning the Events status.
View 6 Replies View RelatedI have one collum with number ranging from 0-1000 in. I have another collum titled "above 90".
How do I get the "above 90" collum to display as 1 if the number in the other collum is above 90?
I understand it must be some kind of "COUNTIF" function but not sure...
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
Display progress bar with percentage completion.
The below code just display macro is running without notifying user the percentage of completion.
[Code] .....
I have a formula which calculates number of days remaining. But I need a formula to to know how many days passed after a particular date.
Example :-
Date .Days passed
10-Feb-2010 .6
=IF(ISBLANK(G14),"",IF(TODAY() > G14,"LIC EXPIRED",G14-TODAY()))
I am trying to do 2 things involving data validation. 1) Count the number of entries in a data validation dropdown list and display a result. 2) Use an If statement to pull the formatting from a cell into another cell.
An example would be if Cell A1="A", then show the drop down list associated with cell or sheet "!ryanB2". Alternatively, I would like to also display the number of entries in the drop down list.
Count value in date and status criteria as in attached file.
UNIQUE VALUE COUNT .xlsx
I am using this formula to calculate a set of PH(Public Holidays) that have passed from a period of 1/4/2009 to 31/3/2010.
=IF(TODAY()>='Team Schedule'!D5,1.5,0)+IF(TODAY()>='Team Schedule'!D6,1.5,0)+IF(TODAY()>='Team Schedule'!D7,1.5,0)+IF(TODAY()>='Team Schedule'!D8,1.5,0)+IF(TODAY()>='Team Schedule'!D9,1.5,0)+IF(TODAY()>='Team Schedule'!D10,1.5,0)+IF(TODAY()>='Team Schedule'!D11,1.5,0)+IF(TODAY()>='Team Schedule'!D12,1.5,0)+IF(TODAY()>='Team Schedule'!H2,1.5,0)+IF(TODAY()>='Team Schedule'!H3,1.5,0)+IF(TODAY()>='Team Schedule'!H4,1.5,0)-4.5
From what u can see here, its a massive formula.... but I am pretty sure that there is a shorter way to key in the formula
*Note*
'Team Schedule'!D5-D12 and 'Team Schedule'!H2-H4 are PH. disregard the 4.5 that is in the formula as it is used for other purposes. Every PH that has passed will credit a 1.5 into the cell.
I have a VBA macro that goes through a decently complex system to delete something like 70 old tabs, create new ones, link data from a main page to these tabs, and create 3 plots per tab. When running the script, it will go through something like 50 of the tabs, and then receive an error on something rather trivial that has been done many times before successfully in this macro (like changing the font size on one of the axes on one of the graphs). I tried an On Error Resume Next, and sure enough it ignores the error, but it then does some sort of crazy loop starting over recreating all the tabs incorrectly, and then excel just shuts down. So, that's no good.
Anyway, I can comment out the change of the font size, but it still has the same issue on some other trivial thing. It seems like the system just runs out of room or needs a cache cleared or something. I'm not sure.
I am trying to lock cells after today's date has passed so that no one can make changes to it after today's date has lapsed. This is for protective reasons so that people do not remove their names from reserving something after using it. Now the code should disallow locking after cell input entry when today's date hasn't passed so that changes can still be made by the user. I am trying to determine the code to do this but I have no idea as to how to do it.
Here's a scenario: I reserve something for Aprill 11, 2009. I input my name. Since it's April 9th, 2009, I am still able to make changes up and until April 11, 2009. After this date, the cell is locked and no changes can be made, except for the administrator.
I am new to Excel programming, haven't done any before and not familiar with creating/editing macros. Using Excel 2007.
I would like to automatically lock all the cells in a row if the date in column A in that row is >= 7 days old. Data is entered once a week (some time Sunday - Saturday) and I would like historical data (rows) to be locked so that they can't be edited inadvertently.
If possible could I also highlight the current working week somehow?
I have attached the worksheet : testworksheet.xlsx
I am able to quite easily count the number of specific values in a cell after the table has been filtered. However, the problem I have run into is that some times the data needs to be placed into the spreadsheet twice (or to be more specific the same subject is associated with several unique data points).
What I need: some way to count the instance of some give value in column D only once based on the presence of a duplicate (unique) identifier in column C. However, when I filter the entire database, it must count *only* the filtered cells and not the hidden cells as well.
Picture:
Column C Column D
111111 M
111111 M
111111 M
[Code]....
Currently calculates: M=9, F=2
Right now it incorrectly states there are 9 "M" from column D when it really should be 5 since 3 are duplicate values. My main difficulty is making sure this continues to work after I filter the entire sheet (say column ZZ) and have a bunch of hidden cells.
Equation currently using to count only filtered values (in this case "males" and "females"):
="M = " & SUMPRODUCT(SUBTOTAL(3,OFFSET(D3:D13,ROW(D3:D13)-MIN(ROW(D3:D13)),,1))*(D3:D13="M"))
I would like to develop a user-friendly Excel 2010 spreadsheet that would allow the user to enter from 1 to 10 (i just picked this number at random just to have an upper limit) employee numbers in cells A1-A10 and "click" on the VBA Code button that would invoke an Access Query and in the process return all the applicable data gathered from the query back into the Excel Spreadsheet. Believe it or not, I can do all this mentioned so far. BUT what i cant do is my second option for the user which is allow them to pull ALL of the employees back into the spreadsheet using the same query.
In summary, using Excel as a frontend dashboard, I know how to get a specific number of employees' information from a query and I know how to get all employees' information from a query but I dont know how to get either/or. In other words, I could do this with two queries and two "VBA-Code" buttons but I would like to do it with one query and one button.
In a datafile I have one column containing a trip 'origin' and a second column contains 'destinations'. I want to count how many times each trip occurs (so the same origin/destination pair). This is doable using COUNTIFS but unfortunately respondents did not provide consequent origins and destinations. I encountered the following formulations
-Alfastraat, Amsterdam
-Alfastraat 5, Amsterdam
-Alfastraat 5, 1021AB Amsterdam
-Amsterdam, Alfastraat
Since the format is different among and within respondents functions containing LEFT, RIGHT, MID are not useful (at least, my trials did fail). I found a VBA-script for a FUZZYVLOOKUP which sounded promising. Unfortunately the data is stored on a remote PC without VBA on it.
Is there a way to count the occurrences of trips given the circumstances?
In Excel 2003 the Status Bar is missing. I know to go to Tools, Options, View to view and hide the Status Bar however as i cannot see Tools (as Status Bar missing) is there another way to get the Status Bar back?
View 2 Replies View RelatedFrom time to time, the status bar in excel 2010 is not showing (I don't mean the information is not showing, I mean the bar is not there at all). In previous versions I would go to view>status bar...
how do I get the status bar back in excel 2010?
I have a macro that takes quite some time to run, 3-4 minutes is it possible to have a % progress indicator in the status bar to let me know how much of the process has been completed so far?
View 5 Replies View RelatedI'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
View 12 Replies View RelatedUses excel 2010 to track the project in the form of project status report. Basically it has to look simple yet tracking should be in the form of progress bar etc.. Our aim is to track a 3month project.
View 1 Replies View RelatedI have data arranged in a worksheet (see attachment) that has hours of work broken down by day. What I need is a formula that will find the number of times a record occurred in Column F that is greater than or equal to 12 hours each day. So for March 1st there would be 9 times. I can do that now with no problem using "=COUNTIF(F4:F14,">=12")" However, the real thing that I need is how many days of each month were there only 1 count (of 12 hours or more). So it needs to look at the range of data that goes from 3/1/13 to 3/31/13 and find the total number of days that had 1 count (of 12 hours or more) each day and return the number of days it found.
View 6 Replies View RelatedI am using excel 2003. My sheet contains Times in column A and numbers in column B. I want to be able to count how many of those rows fall into time periods. Such as how many are from 8:00-9:00 AM. I do have the time column formatted as Time.
Ex:
A1: 3:40 PM
A2: 8:20 AM
A3: 8:55 AM
A4: 10:23 AM
etc.
B1: 23
B2: 34
B3: 12
B4: 35
etc.
So I want to be able to pull that between 8 and 9 AM there are 2 records.
The second part would be (in another cell) to pull the SUM of the numbers that correspond to the previous question. In the previous example it would be the SUM of all corresponding cells (Column B) that fall within the 8 and 9 AM range. Which would be 46 in this example.
I have the following list
Column A Column B
Name of Parts Amount
A 4500
B 5500
C 8000
D 12000
E 4300
F 28000
G 1000
H 7000
I 10000
J 5000
K 11000
Total No. 11
I want the result as follow.
Slab No. of Counts
0 to 5000 4
5001 to 10000 4
10001 and Above 3
Total 11
I'm working with a file from SharePoint (FileA), "FileA" goes out to Sharepoint and opens "FileB" (if not already open) then copies information from "FileA" to "FileB". However if "FileA" is left open, or someone else has it open I am unable to open "FileA". How in VBA can I check to ensure I don't have it open locally (if so swich and continue), checkout and open in SharePoint (if not already open) or Prompt with options to force checkin, checkout to copy info?
Simple VBA copy I used:
Workbooks.Open FileName:= _
"http://sharepoint.baaa.com/sites/SCDT_DSD/Weekly_Releases/11.%20Combined%20Weekly%20Task%20List/1/Automated_Status_Update.xlsm"
Sheets("1").Select
Range("A1").PasteSpecial Paste:=xlPasteValues