Countifs Using Two Criteria Of Which One Is Colour?
Jul 17, 2014
I need to count certain data if they match the same week number but they are not highlighted in red (manual colour not conditional formating). I have a macro that allows me to count cells with a certain colour but I cannot seem to tell it to only to count them if it also meets the criteria of relating to the same week.
Can i somehow combine these to functions or do I need to add soemthing to the countifcolour macro?
View 8 Replies
ADVERTISEMENT
Feb 5, 2014
How to combine many criteria in a COUNTIFS formula with the same range.
I made a formula:
=COUNTIFS(brut!$B:$B;"1T";brut!$G:$G;"F25"; brut!$C:$C;"1")
And it works fine, but I need four more conditions -
brut!$C$C; "2", brut!$C$C; "3", brut!$C$C; "4" and brut!$C$C; "5".
When I change the formula to
=COUNTIFS(brut!$B:$B;"1T";brut!$G:$G;"F25"; brut!$C:$C;"1"; brut!$C$C; "2"; brut!$C$C; "3"; brut!$C$C; "4"; brut!$C$C; "5")
It didn't work anymore.
I don't know how to use IF and COUNTIFS together.
View 4 Replies
View Related
Aug 13, 2009
I'm trying to use this formula in a cell but it keeps giving me #NAME.
What does this mean?
View 8 Replies
View Related
Feb 11, 2010
check out the COUNTIFS function on Data Tables Sheet -> Cell D29 and pls. let me know what's going on. I need is : To calculate the number of items on system data tab which has the "Pending" status and items which belongs to month "Jan-10" under a particular person selected from B 27 cell (Data tables tab).
I solved it by using >=01-01-10 and <=31-01-10 criteria but i don't think its nice idea .... I tried to use AND(function by got failed ...........
View 4 Replies
View Related
May 20, 2014
I would like to count the number of values in column B IF the value in Column A is equal to a value from a range of cells.
I would like the formula to be in cell E7. And the range of cells containing the values is in column D.
Here is my workbook Book1.xlsx
View 1 Replies
View Related
Apr 14, 2014
how to add/remove criteria to a COUNTIFS statement, based on the value of a VBA UserForm Checkbox.
All of the criteria for the checkboxes are based out of the same column. Here is the similar code I currently utilize for my checkbox filter.
[Code] ..........
The code hides fields within a collumn based on the tag within the checkbox's properties. Now I am trying to create an addition that will add criteria to a CountIf formula in real time.
View 14 Replies
View Related
Dec 2, 2008
I have the following formula in a sheet to record basketball stats that I am putting together.
=COUNTIFS('Running Game Log'!A:A,"=Jarod",'Running Game Log'!C:C,"=2 pt miss")
This formula counts from a list that is generated during in-game recording of stats & obviously counts the number of times "Jarod" misses a "2 pt shot".
My question is can the criteria "Jarod" refer to a value in a cell, rather than the specific name "Jarod" as I want to be able to change player names easily, rather than have to edit this formula every time.
View 7 Replies
View Related
May 10, 2014
I know this should be straightforward, but just can't "hack the logic", whether using "Countifs" oor "SumProduct" formulae.
Attached file 140509 String Criteria.xlsx file has database of three fields (Date, Route number and Part number)
I need the formula that totals number of rows meeting three criteria:
(a) A specific date from Col A
(b) A specific number from Col B
And the part I can't sort out:
(c) Any cell containing a "string" in Col C (so needs to count the "core" even if it has a prefix or suffix).
E.g. How many rows have "Date x" in Col A, "Route Y" in Col B and a cell containing "123" in Col C?
View 2 Replies
View Related
Mar 31, 2014
I'm trying to use the COUNTIFS function & have run into trouble because the 2nd criteria is a date. Typically I would just set the range & then put "01/01/2014" if I was looking for all of the January 1, 2014 cells. However in this spreadsheet my source data contains the date with the time. (01/01/2014 11:27:39 AM). Becasue the time is included in the cell, the function returns no results when I set teh date.
I tried to use a wild card "01/01/2014*" which I thought would bypass the time but it still retuns no results. Is there a way to use a windcard with a date cell?
View 3 Replies
View Related
Feb 26, 2014
Need to use CountIFs formula to evaluate multiple conditions in the same column. Here is the formula I tried. It works for Resolved but returns 0 when i try to add Duplicate.
=COUNTIFS('P12 Source'!H:H,A18,'P12 Source'!F:F,"Resolved,duplicate")
Also used this formula with success by referencing a cell that had "Resolved" in it but when I tried to add another cell with "Duplicate" it again returned 0.
=COUNTIFS('P12 Source'!$H:$H,A19,'P12 Source'!$F:$F,'P12 Source'!$F$75)
View 8 Replies
View Related
Mar 15, 2013
The attached file Countifs issue.xlsx shows my attempt to construct a "CountIfs" formula that finds the one record out of ten that matches the following criteria:
a) Col A has 10 IDs. 3 of them are between 40 - 49, and another 2 are alphanumeric. This formula SHOULD identify these 5:
=COUNTIFS(A2:A11,">39",A2:A11,"<50",A2:A11,"4AB",A2:A11,"40C")
Doesn't work, It finds the 3 numerics but returns "0" when the two alpha-numerics are added.
b) Col B has a list of dates. 5 of the 10 are this month. This formula SHOULD identify them:
=COUNTIFS(B2:B11,(EOMONTH(NOW(),-1)+1),B2:B11,(EOMONTH(TODAY(),0)))
Doesn't work. It returns a value of "0".
c) Col C shows the Status for each record. 5 are "A" and 5 are "B". The following formula DOES find all the "B"s
=COUNTIF(C2:C11,"B")
But obviously I need the full formula to find the one record out of the ten that meets all the criteria.
in (a) and (b) and enable me to combine all three sections.
View 4 Replies
View Related
Feb 16, 2014
I am trying to populate some results using countifs formula with multiple criteria. below is the formula am using and the last two criterias are dates
=COUNTIFS('Unproccessed CIT'!$B$5:$B$411,Summary!$A$4:$A$35,'Unproccessed CIT'!$G$11:$G$417,"<>"&"closed",'Unproccessed CIT'!$A$5:$A$38,">="&$C$2,'Unproccessed CIT'!$A$5:$A$38,"<="&Summary!$E$2)
Results:
#VALUE!
View 3 Replies
View Related
May 23, 2013
I'm trying to use countifs on a filtered table to find the sum for a column based on 2 criteria.
I've used =SUMPRODUCT(SUBTOTAL(3,OFFSET(Sheet3!K7,ROW(Sheet3!K7:Sheet3!K7:K20000)-ROW(Sheet3!K7),0)),--(Sheet3!K7:Sheet3!K20000="Yes"))
for a single criteria which is great, but I also need it to look at column B.
In a non-filtered table it works as:
=COUNTIFS('Sheet3 '!$K:$K,"Yes",'Sheet3 '!$B:$B,B5)
Is there any way to do this?
View 3 Replies
View Related
Aug 3, 2013
I have been using CountIfs with a lot of luck until I added one extra criteria that it ignores.
ORIGINAL FORMULA
=COUNTIFS(ADate, ">" & N$2, ADate, "=" & 10000, WBid, "" & N$2, ADate, "=" & 10000, WBid, "
View 1 Replies
View Related
Sep 25, 2007
I have used the following Formula to count the number of times that ABC occurs in red text within the listed range, and it works fine
=PERSONAL.XLS!CountByColorText($G$4:$R$211,3,TRUE,"ABC")
I now want to count the number of times that (F) occurs in red text within the listed range, the difference being that (F) is always only the last three digits in the cell eg ABC (F)
I have tried this formula =PERSONAL.XLS!CountByColorText($G$4:$R$211,3,TRUE,"*(F)*")and get 0, which is incorrect
View 12 Replies
View Related
Apr 6, 2007
I want this macro todo is to start at the top of columns A to J
and work down the column and colour any cells that meet the criteria.
Range(“A1”).Select
Do Until ActiveCell = ""
If ActiveCell > 0 Then
Selection.ActiveCell.Interior.ColorIndex = 5
Else
ActiveCell.Offset(1, 0).Select
End If
Loop
End Sub
View 9 Replies
View Related
Sep 17, 2009
I have some code below which looks at values added between a set range of cells. This works OK.
My problem is when i have to change the cell as it removes the background colour already set to certain columns ie Columns I, J, P, Q, W, X, AD, AE (these are coloured a light green).
The other cells in the range have no colour and so the code below works with no problem.
View 6 Replies
View Related
Jul 24, 2014
I am trying to make different colour arrows appear based on a set criteria, I am having issues with the hide/show amber part, it doesn't seem to be doing the "AND" part.
'Hide/Shows Green'
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1").Value >= 0 Then
ActiveSheet.Shapes("Arrow1").Visible = False
Else
ActiveSheet.Shapes("Arrow1").Visible = True
End If
'Hide/show Red'
If Range("A1").Value = 0 And Range("A1").Value
View 5 Replies
View Related
Jun 11, 2014
I have developed the following code to colour cells dependent on reference to adjacent criteria (in Col D).
Is there anyway I can simplify this code to avoid three separate "For each" statements?
Code:
For Each c In Range("E12", Range("e" & lastrow))
If c = "" And c.Offset(, -1) "" Then
c.Interior.ColorIndex = 7
[Code] ..........
View 2 Replies
View Related
Oct 3, 2012
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
View 1 Replies
View Related
Feb 13, 2014
Is it possible to search Excel by cell colour, i.e. font colour...and then change the said colour to another one?
View 3 Replies
View Related
Apr 17, 2014
I have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
View 2 Replies
View Related
May 23, 2014
A column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies
View Related
Jul 17, 2014
So I have a macro that colors the selected cells in a certain color. Now im looking for a code that will switch that color every 7th cell, the cells will only be selected horizontally. For example:
if the selected range is 10 cells, 7 of them should be in one color and 3 of the should be in another. But if the selected range is 15 cells the first 7 should have one color and the next 7 should have another and then the last one should have the first color again, and so on..
View 6 Replies
View Related
Nov 24, 2011
I'm creating a worksheet which tracks pupils progress in our school. down the left there is a column to put in the level they came into our school on - eg 1C or 3B etc.. to the right of the level is a colour coded row which shows Pink, Yellow and Green - if the pupil makes it into the green part of their level by the time they leave then they are on target.
Basically I have a column of cells which use a data validation list which is linked to another sheet with a list of levels. What I want to happen is when I select the level - it fills the row to the right with the correct colours.. I've attached a picture to show you what i'm trying to do.
Reason being is - we might have 6 kids on L3, and 1 on L1 so the number of rows needed for each level changes - at the moment I'm having to copy and paste - which although is easy enough, it is a bit tedious when you have a whole bunch of pupils to put on the grid.
I can't find the option in imageshack to use a thumbnail
View 6 Replies
View Related
Oct 31, 2013
I am using the formula to count if c- is in the cells: =COUNTIF($B2:$U2,"C-")
However, I need to change the formula so rather than just count if C- is in the cells, I need it to count if A*, A+,A, A-, or B+ are in the cell instead.
View 2 Replies
View Related
Mar 23, 2009
i want a cell to change to the colour green if 5 other cells on the page are green colour.
I want a cell to change colour to red if there are 1 or more red cells on the page.
How do I make this work?
View 8 Replies
View Related
Oct 23, 2008
I am trying to automatically change the colour of an oval in worksheet1 to the colour of oval3 in worksheet 2.
Currently oval3 (Worksheet 2) has the a vba code that changes its colour when you click on it.
View 9 Replies
View Related
May 12, 2014
I'm currently working with the formula
=COUNTIFS(Data[Quarter],"Q1",Data[Country],A3,Data[Sales],">2000")
However I need the formula to count only one for the n possible duplicates in the Data[Name] column.
View 8 Replies
View Related
Apr 21, 2009
Say I have a list of part numbers, and each part number has an X or a 0 next to it, depending on my own set parameter.
How do I then report that data on another tab so that it counts how many there are in a set area AND if its an X.
At the moment I have this:
View 7 Replies
View Related