Counting Row Labels In Pivot
May 10, 2012
Counting row labels in a pivot.
I have data from a SCCM report (user, department and application). What I want to see is how many applications a particular department uses.
If I pivot department to row label, then add application to that row label I get a list of departments and the different applications they use.
I want a count of the number of different applications.
I tried adding application to the count field, I get a count of the number of times each application is installed (depends on how many users there are per department)
View 7 Replies
ADVERTISEMENT
Jan 24, 2014
I have column in my table that calculates time in hours between now and ticket open date (ticket open date in B1)
so, in C1 i have following formula:
=(now()-B1)*24
Results are in hours, such as 15, 25, 32, 65 etc
In pivot table, I would like to see how many tickets with values of less than 24 or more than 48, etc
My available columns are: Region, Ticket#, AgingOpenHr(this new column).
I tried it different ways, and I cannot get it Less Than and Greater Than work under Values, works if I select grater than or less than in Label, but label does not produce consistent numbers.
View 1 Replies
View Related
Feb 7, 2014
I have an export from a database that I'm bringing into Excel 2010 of about 30K records. Data points are recorded numerically and I have their associated text "value label" (what it would be called in STATA, for example, not sure what it's called in Excel). I want to create various charts/pivot tables with the data and want the labels to be the text label, not the number.
For example, variable ASSIGNMENT has the following possibilities:
1
2
3
4
Here's what each of those "mean" (I have this in another table):
1 - Sick
2 - Overtime
3 - Court
4 - Present
How do I create a chart or pivot table where the labels are "sick", "overtime", etc., and not "1", "2", "3", "4"?
View 8 Replies
View Related
Jan 16, 2014
I have a worksheet that is just a list of items with a location listed next to each item. I took that list and made it into a pivot table and would like it to have it list the items with each location it is in displayed across. I have already set it to tabular form in the pivot table options, but if there are multiple locations it lists them vertically and I want them list horizontally for printing purposes. I have attached a screen shot to explain.
View 1 Replies
View Related
Feb 14, 2012
When I run pivot tables, the row label descriptions are only displayed at the highest level for each category. As displayed below the highest level on the row label is MOB and is only detailed in the first row. I need for each of the different row label levels to display the data so there are no blank cells.
MOBMan. Boxset 2Large1328Manual StickeringN/A500Shrwp 13+Large16680Small596Shrwrp 7-12Large35704Small2411SW 1-6Large87912Small14635SW w/ PremLarge26966OUTDisplay Lvl 1Small100Klutz Standard Display 6-packN/A2499Man. Boxset 1Large40000Man.
[Code] ........
View 2 Replies
View Related
Apr 30, 2014
Was working on this problem for a poster: [URL] ......
I can't seem to get the pivot table/chart to format exactly as I desire. It seems that as soon as I add 'group by hour and day' Excel forces the formatting to AM/PM and I want to keep it military. I want to group by hour, so that data that occurs at 6:00 and at 6:30 are grouped, and I had to group by day so that 6:00 on 1/1 was separated from 6:00 on 1/2.
Attached is a worksheet which shows the desired chart format (not a pivot chart), and the attempted pivot chart. I want the pivot chart to match the 'simple' chart in look and feel. Any attempts to change the formatting of the row labels to 'h' is promptly ignored by Excel.
Note the two tasks that occur at hour 18 (one at 18:00 and the other at 18:20 (you will need to see the formatting to truly see the minutes)). Those should be combined in the pivot table (and they are) and on my 'adjusted' table (where I used SUMIFS).
View 2 Replies
View Related
May 15, 2014
I have a data set where a number of pieces of technology are listed in rows. For each piece of technology it can relate to a "Network" or a "Terminal" and the columns are yes/no as follows:
Tech Network? Terminal?
Tech 1 Yes No
Tech 2 Yes Yes
Tech 3 No No
Tech 4 No Yes
When I plot this on a pivot chart, I get the attached chart, where the x-axis relate to the hierarchies, i.e. Yes/Yes, Yes/No, No/Yes or No/No. As you can imagine, this is not very useful for the viewer as it's not clear what the yeses and nos refer to. It would be much better if I could rename the axis labels: "both"; "network only"; "terminal only"; or "neither".
Is this possible? And is there a solution that doesn't require me to change the source data? I'm happy to use a power pivot if that would make things easier.
View 1 Replies
View Related
Feb 9, 2014
When I use "Merge & Center cells with Labels" of a pivot table, It is merging Column labels as well as row labels. Is there a workaround to apply this feature only for column labels and not for row labels.
View 2 Replies
View Related
Sep 18, 2009
Optionally, to customize the sort operation, on the Options tab, in the Sort group, click Sort. In the Sort <Field name> dialog box, select the type of sort that you want by doing one of the following:
To return items to their original order, click Data source order. This option is only available for OLAP source data. To drag and arrange items the way that you want, click Manual.To select a field to sort by in ascending sort order, select Ascending (A to Z) by, and then select the field from the drop-down list. To select a field to sort by in descending sort order, select Descending (A to Z) by, and then select the field from the drop-down list. Tip Read the Summary section at the bottom of the dialog box to verify your choices.
My problem is this: after following the above steps, then clicking Manual, then ok, I cannot drag and arrange the row labels in the PivotTable.
View 2 Replies
View Related
Apr 11, 2012
I have 5 pivot tables which feeds data from a single worksheet. The data from this sheet change every month. Meaning, old data out (deleted) and new one's inn.
The problem I have is the old data I used in the Row Label (such as Customer Name) are still showing in all the pivot tables even though the record is no longer there.
View 3 Replies
View Related
Feb 15, 2014
I have a pivot table with slicers. I would like to collect into a cell all the item names that have been selected (filtered). (through VBA or Formula) For example if I select A, D, and E into the (A, B, C, D, E, F) list. I want the labels A, D, E to appear in a cell.
[URL]
View 1 Replies
View Related
May 8, 2013
I am working with a Classic Pivot Table and have one thing that is troubling me.
I have grouped my data and got things displaying however only the first record of each group is populated (displayed)
Groupings/Row Labels Data Values Over Here
Field1 Field2 Field3
3 1 1
0
0 1
0
2 1 1
0
0 1
0
1 1 1
0
0 1
0
What I would like to see is:
Field1 Field2 Field3 Data Values Over Here
3 1 1
3 1 0
3 0 1
3 0 0
2 1 1
2 1 0
2 0 1
2 0 0
1 1 1
1 1 0
1 0 1
1 0 0
This is much more readable.
View 1 Replies
View Related
Jun 25, 2013
How can I Remove the word "Blank" in Row Labels or change it as Blank or no data.
View 1 Replies
View Related
Feb 15, 2014
I have a pivot table with slicers. I would like to collect into a cell all the item names that have been selected (filtered). (through VBA or Formula) For example if I select A, D, and E into the (A, B, C, D, E, F) list. I want the labels A, D, E to appear in a cell.
[URL]
View 3 Replies
View Related
Mar 27, 2007
I have a pivot table in Excel 2003 which summarises one field (subjective) then totals at the change of a second field (cost centre). I want to show the cost centre label on each line of subjective. In a standard pivot table it only shows the cost centre with the first subjective in each group.
View 2 Replies
View Related
Feb 11, 2013
I am using Excel 2007. I have a population that I used to create a pivot table. I am currently double clicking on the value cells to create worksheets of only particular "row label" categories. I am then copying the "row label" information into the newly generated work sheet name tab. This works fine when I only have a few "row label" categories to do but it is tedious if there are many categories.
Is there any way to automate the creation of work sheets for all row label values and also naming each work sheet tab with it's respective row label information. Here are images of the pibot table and the type of work sheet I would like for wall row label values.
View 1 Replies
View Related
Jan 25, 2010
"Is there a way to make values in a cell that are comma delimited (ex. cat, dog, fish) became separate labels in a pivot table instead of getting labels like 'cat, dog', 'fish, cat', 'cat, dog, fish' which represents the exact value in the cells.
The only real option I can think of would be to make an extra rows with the same data for each pet type. For example if the pets were 'cat, dog', there would be two almost identical rows except one would have 'cat' and the other 'dog'."
I have made a vba setup which can solve the problem. But it is pretty complicated and unstable. I need a solution which is not vba based. ~Or a least a very simple code!
View 2 Replies
View Related
Jul 16, 2014
On a sheet called, "Details", I have a pivot table that has three fields in the column area, Calendar type, Description, and Dates. I want to filter the pivot table based on a label filter in the Dates column. The filter should be between two dates (in D4 and D5) that are entered on another sheet and passed to the Details sheet through formulas in cells D4 and D5.
I have attached the following code to a button on a different sheet.
The code successfully filters for the employee name (which is a report filter in the pivot table) which is in a named cell.
I am having trouble with passing the start and end dates to my pivot table filter. I do not get any errors, the filter is simply blank.
Private Sub CommandButton3_Click()
Sheets("Details").Select
Dim pt As PivotTable
Dim Employee As String
Dim SDate As String
Dim EDate As String
[Code]...
View 6 Replies
View Related
Mar 11, 2009
I have a UserForm and what I'm trying too do is change the color property of all the labels on the form simultaneously.
View 9 Replies
View Related
Jul 13, 2007
I have this if statement in a spreadsheet: =IF(V4>Q4,"yes","")
Then I created a pivot table to count this field but it's counting every line when I expected it to skip null values.
Is there something I can do so that it only counts the value "yes"
View 9 Replies
View Related
Feb 9, 2008
Found what it think is the correct methodology (Pivot table) for doing this, but I'm struggling to apply it.
I have a very simple excel 2007 document that has one column with multiple rows;
blue
Blue
green
red
red
green
Green
blue
red
Blue
blue
Bleue
Rouge
red
Bleue
I would like the easiest way to count the total of each and sort in highest first,
e.g.
red 4
blue 3
Blue 2
green 2
View 9 Replies
View Related
Apr 2, 2008
why it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.
View 6 Replies
View Related
Dec 11, 2013
I have a big list of names of people that have completed a bunch of training they have completed. I want to be able to run a pivot table/chart and only count a user once vice each time they have completed a training. So in otherwords I want to get a count of how many people are on the list vice how many certifications they have.
View 1 Replies
View Related
Jul 18, 2014
My ultimate goal is to take my spreadsheet listing a large number of events and attendees and create a graph that gives a breakdown of the distribution of events by type.
The spreadsheet looks something like this
Event A_________Date 1_________Type 1_________John
Event A_________Date 1_________Type 1_________Kate
Event B_________Date 2_________Type 1_________Mary
Event C_________Date 3_________Type 2_________Lisa
Event C_________Date 3_________Type 2_________Will
Event D_________Date 4_________Type 3_________Jim
Event E_________Date 5_________Type 2_________Bob
Etc. (Note I don't need the date for my information, I was just including it to give an idea of what I'm working with.)
I'm trying to create a pivot table that lists the all the different Types and then the number of Events that each Type has, so I can make a graph that shows it.
View 7 Replies
View Related
Jun 26, 2012
I have a column C which list Unique ID and this ID can be repeated several times in Column C. For each row the Unique ID has a value in Column D of how many sick hours are taken. I would like to create a pivot table which would provide a count of the Unique IDs and the total number of hours for the Sector in Column A.
Q1_Sick UnCertified 01042012_25062012(1).xls
View 10 Replies
View Related
Feb 26, 2009
I have just started using pivot tables and I have ran into a problem with the count feature. I have an original data list that breaks down in the pivot table to:
date
events on that date
Using the pivot table facilities, I want to do a count of those who said they were going to attend, and those who actually attended. The detailing both of these columns on the original list have a true false designation. When I do the count, the summarised information only counts the number of records for each of these events, and not the 'true' field entries for each of these columns.
How do I count these two parameters for 'true' from the original list in the pivot table so I can see a comparison between these two numbers?
View 9 Replies
View Related
Apr 6, 2007
I'm finding my way in pivottables (which is a new function to me).
I can now create one to count the item I wish (see attached).
I'm trying to get the table to display, but not use for counting, the rest of the row calls associated with the counted data.
For example, looking at attached, the source data is so:
ComponentPart NumberValuePackageType
C1C0805COG1NFJ50V 1nF0805 COG 5% 50V
C2C0805COG1NFJ50V 1nF0805 COG 5% 50V
I'm counting how many instances there are of the part numbers and displaying in the pivottable as so: ...
View 4 Replies
View Related
Jan 23, 2014
I have a problem when Im trying to calculate averages in my pivot table. I dont know how to handle my missing values. If I leave them blank I cant get the average at all because the values end up under the dates instead of in a column next to the dates where I want them to be. If I write 0 it uses it as a value, eg 2+2+0 and i get 1,33 instead of 2. Also the zero could be a value for some of the parameters, so it's no good.
I am new to pivot tables.
View 5 Replies
View Related
Jan 1, 2014
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
View 3 Replies
View Related
Feb 3, 2014
I was given this spreadsheet to count attendance by entering the entry date and exit day, however it's counting the first day and the last. I'm needing it to only count the first day and not the exit day.Book2.xls
View 1 Replies
View Related
