I have a long list of zip codes (this is just a small portion of the list) that I need to make into ranges. Is there a formula I can use?
From this list:
90080
90081
90082
90083
90084
[Code] ......
To this:
To From
9008090084
9008690089
9009190091
9009390099
9010190103
9017490174
9018590185
9018990189
9020190202
9020990213
9022090220
I have a spreadsheet that has two different data sources (i.e., A and B). The amounts of these data sources (i.e., the number of columns) varies from sheet to sheet. I have to calculate the averages of these data sources independently and together. Because this data is spread across twenty or more spreadsheets, these calculations can be time-consuming. I want to do the following:
1. Locate the last occurrence of the first data source "A" in row and then insert a column after that cell.
2. In that cell, I want to get the average of each data source for each row of data (i.e., there are always 19 rows of data).
I want to do the same two steps for the second data source "B". Then, I want to insert a column after the "B" average and this column will be used to get an average of each row of data from A and B together. Please keep in mind that the number of data sources for A and B varies from sheet to sheet.
So far, I am working on code to try to " find" the text in a range (i.e., find the last instance of "A"), but I cannot figure out how to get it to get it to stop at the last occurrence and then insert a column. I have some ideas about how to calculate the average, but any of yours are much appreciated.
Also, the row with the type of data (i.e., A or B) is named because this function is part of a larger macro. Therefore, it is relatively easy to get to it.
I have attached a version of the file that displays how I want it to look.
The code I have thus far is:
Cells.Find(What:=A, After:=ActiveCell, LookIn:=xlFormulas, LookAt _
:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
False, SearchFormat:=False).Activate
I am attempting to create a formula for a project. The multipliers I use will be based off of # of units used. So lets say I have 500,000 units. The first 100,000 would be multiplied by 9.3, 100,000.01 - 250,000 would be multiplied by 9.5 and 250,000.01 - infinite be multiplied by 9.7. I know I can created different cells, but wanted to see if this could be done with one formula. I tried using sumif but that doesnt appear correct.
View 8 Replies View RelatedI have to create ranges of unique numbers that follows the below rules.
1) Have to start with 3 standard digits (ie 101 or 102 etc)
2) The total length of the is has to be 10 digits (ie 1010123456)
3) The second part (the last 7 numbers) must be unique!
4) Can create a lot of numbers (more that 5000 rows)
5) thats all with the unique numbers
Continue,
Somewhere in the sheet has to be a search function to find where a specific id is located, make it red and copy/cut in to another sheet.
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code:
Sub x()
Dim rngTemp As Range
Dim rngFind As Range
Dim rngFirst As Range
Dim rngLast As Range
Dim nom As Range
Dim strFirstAddress As String
[code].....
I need to create a consecutive number range
from 10,770 to 14,194
(using only numbers that end in 0,1,2,3, & 4)
In other words, with No numbers that end
in 5/6/7/8/9
Example: 10,770
10,771
10,772
10,773
10,774
10,780
10,781
10,782
10,783
10,784
10,790
10,791
... and so on, upto 14,194
I need to know if its possible, and if it is, what the formula would be to get the correct "Rate" to pull based on the criteria given:
User would input the following information:
Zip Code: 56559
Pallets: 3
Weight: 1200
The formula needs to use the following table to use the criteria listed above, to fine the correct "Rate". The "Zip Code" and "Weight" both need to fall between the correct ranges and then match the "Pallet" to find the correct "Rate".
From Zip Code
To Zip Code
Pallets
Weight From
Weight To
[Code]......
I want to find the number of similar values contained in a column based on a date range I specify.
I have a data set that's formatted like the following (you can see the full data set at [URL] but I've hidden the irrelevant columns and highlight the relevant ones)
[Code] .......
I want to use this data to create two types of graphs. One showing the ratio including all values in the Status column. There are 4 total (Open, Lost, Won, Won-Job Cancelled). I want another which excludes the "open" status from the ratio figure. I've create some images demonstrating what I want to accomplish at [URL] .....
Additionally, I want to be able to specificy date ranges for these charts. Specifically 0-30 days from todays date, 30-90 days and older than 90 days.
I want to accomplish this using Google Sheets (the latest version) and know how to use the graph total. It's just creating the data the way I need it which is proving to be the most challenging.
i have a table of tools and their properties which i am using to provide validation lists for a number of other worksheets that record when those tools were last calibrated/tested and when they need to be calibrated/tested next.
many tools require more than one form of testing (electrical and/or calibration), but not all tools require both.
can i create some kind of drop-down menu the looks at the tool master list, but only gives the option of those that require the particular type of testing i'm recording on that particular list? how can i create a drop-down list that is more limited than the range i have selected for it to display?
I'm creating a spreadsheet to keep track of my costs of production in an online game. Within the game there are a range of spawned resources that appear for only a short time before being unobtainable these resources have specific types that is shared between multiple spawns of the resource but each resource spawn has a unique name.
My first worksheet lists all the resources and their various qualities and the later worksheets are meant to allow me to choose from a list resources matching the requirements of the item I'm looking to craft. The example i have shown in the second picture requires Tatooinian Fiberplast and Lokian Wild Wheat to craft so in the Chosen Resource column I would like to have a drop down list allowing me to select the named resource type i would like to use - for Tatooinian Fiberplast the only thing on the list should be Omnitwixi and for the Wild Wheat it should show Fizi and Krad
[URL]....
[URL]....
I am aware there are people with more pressing problems than computer games and as such
I would like to be able to compare the "standards" in Column A with the Assessment status in Column B and the Assessment period in Column C in order to generate a compact list in another workbook (ideally) or tab (if not). A list might typically contain all the standards that have been M (mastered) during a given Assessment period. I realize that filters would achieve this to a large extent but I was hoping to automatically populate another worksheet or tab.
View 3 Replies View RelatedIs there a way to add cascading lists (from data validation or form/activex controls) to my excel spreadsheet WITHOUT using named ranges? Maybe structured references?
I need to avoid the named ranges because it will cause my workbook to have duplicate named range titles which I cannot avoid.
As a general example my issue arises because I have something like this where the titles are the same but they map to slightly different data. These also have to be cascading because the titles align to another list which I do not show in the example. I also considered using pivot tables, but the issue there is that the data validation lists repeat in the same worksheet. So I would have 3 cascading lists in row1 dependent on each other, but the same 3 lists in row2 dependent on row2 but not the previous row.
[Code] .....
I need to create hundreds of named ranges going down a single sheet.
The name of the first range is in cell a1 and is 13 columns wide and 7 columns high (a1:m7)
The next name is in a8 and the range is a8:m14 and so fourth
If it's easier on a separate sheet I can have a list of names I want in column A and then the cells they refer to in column B.
E.g.
A B
Range1 Sheet1!A1:M7
Range2 Sheet1!A8:M14
Range3 Sheet1!A15:M21
I am looking for a Macro that would randomly select 20 items from my inventory list for performing spot checks. Column F of Active Coil Log tab is where the data would need to pull from, however I would like all data in the row to go along with it. I've explored the RAND functions, but they don't seem to be the right fit .
View 2 Replies View RelatedI have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
I have a workbook containing 2 sheets called ('EPM Extract' and 'Sheet B'). Column 'B' of the 'EPM Extract' sheet contains a list of Project IDs (numerical), and 'Sheet B' also contains a list of Project IDs (also in column B), plus all of the additional data I require.
Now, from the required cell within the 'EPM Extract' sheet, the normal Excel the code would read as =vlookup(B3,'Sheet B'!B5:W32,11,False), upon which I would drag down the code from that cell to all other required cells below. However, these are my issues:
* How do I even begin to write the code within VB, as I know that variables and arrays have to be set
* I need to apply the vlookup across 12 columns as I am bringing back 12 different results (i.e. I need to copy results from column counts 11 to 22 from 'Sheet B' to columns in 'EPM Extract' sheet.
*The amount of data in the sheets will vary each month, so I need to know how to apply the code only to the amount of rows in the 'EPM Extract' sheet, so some kind of R1C1xl.UP will need to be defined also.
I have a workbook with four worksheets named
FilteredData
FilteredDataFormat
array
arrayFormat
The two sheets named FilteredDataFormat and arrayFormat exist strictly to preserve headers , and column widths.
So that for convenience sake I can clear my data without specifying a range that excludes the headers.
I simple clear the contents of the 'FilteredData' and 'array' then copy and paste 'arrayFormat' and 'FilteredDataFormat'.
Sort of an unconventional and lazy approach but I see no reason why this will not work.
Here is my original code and what happens is that excel creates another workbook for some reason unknown to me
For some reason the following code creates a blank page everytime. Is there a way to have it not do this that I am not seeing?
View 2 Replies View Relatedhow to create commandbutton code so let me explain what I am trying to do and anyone that could provide me with some basic code details to solve my problem:
When the command button is clicked in an excel worksheet I want a pop up box to come up containing specific information sourced from two other excel worksheets depending on the commandbutton. What I want to know is what code do I enter from the visual basic view in order for the box to appear with the right information.
I need to distribute it to several areas of my company. Each area only needs part of the report. Therefore I have written some code which splits the existing report by area and creates a brand new report with that smaller chunk of data in it.
However I now realize that the new sub-report will require some code of it's own in order to function. My problem is that only the sub-report will be distributed to the end user. The core report will not. Therefore any code written for the new sub-report must be included within the sub-report.
I thought this would be a simple task, but i cant seem to figure out how to do this.
I have a list with names and its a fixed number of rows, say A1:A200. In the next column, B1:B200, there is either TRUE or FALSE. I want a make a new list with all names with "TRUE" on the same row, without any blanks. How can I do this?
I have a macro I am using that uses several date filters. There are filters for the previous month, previous 6 months, previous year, all dates in the future, etc.
Every month I have to edit the macro and change the dates in the macro so it remains accurate. Is there any way I can modify the macro so that the dates are stored in a cell within the workbook and not in the macro?
What I would like is to type the date ranges in a sheet within the workbook and have the macro look to those cells for the date filter instead of typing in exact date ranges within the macro. This way the actual macro code does not need to be modified every month. I would like to only have to change cells within the worksheet and not touch the macro code.
My macro does some calculations for a worksheet. I need the macro to loop through all the worksheets regardless of how many worksheets there are. My first sheet is a summary page with the names of the subsequent sheets that the macro needs to do calculation on. I need the macro to recognize the worksheet names in the summary page and run for each worksheet name. For instance the next time I run the macro I may have fewer sheets of more sheet names in the column. It sounds almost like an Indirect function problem.
View 9 Replies View RelatedI'm making a form in excel to retrieve a number of welds. This number needs to be passed on to the next form to dynamically create an identical number of input fields (a set of text boxes and labels essentially). Any ideas on how I might do this? Is it even possible? I would like to avoid having 100 (my assumed maximum, it could get changed) sets of input fields and hiding the unused ones,
View 9 Replies View RelatedI am trying to use vlookup in vba but i receive an error '1004' "Unable to get the VLookup property of the Worksheetfunction Class". I need a way around this. I have ID numbers in the first column and I am trying to input the name of the table it corresponds to in column "O". I have 4 different tables. I am using For Each cell in Selection to go through every cell by using If statement along with VLookup. As soon as the function is forced to go to the next IF selection, it gives me the error.
Range("O3:O" & myCount + 2).Select
For Each cell In Selection
If IsEmpty(cell) Then
If cell.Offset(0, -14) = Application.WorksheetFunction.VLookup(cell.Offset(0, -14), _
Workbooks("Warehouse Inventory"). Sheets("TWGReports").Range("$a$2:$z$1000"), 1, False) Then
cell.Value = "TWG Facility"
If cell.Offset(0, -14) = Application.WorksheetFunction.VLookup(cell.Offset(0, -14), _ .....................
how to draw the top 5 numbers for each type of element into a list, excluding duplicates, without using array formulae?
Example.xlsx
I am trying to create a list from an array. Said array contains formulas that return numbers from input contained in an other table. I would like the list to list the numbers in ascending numerical order.
View 5 Replies View RelatedI have got a worksheet wherein Column A contains the Customer Code, & Column B contains the Customer name. I want to create new worksheets based on the Customer Codes in Column A i.e for each Customer Code, new worksheet should be created wherein I would later on enter some formatting & data in the worksheets. When I select Delete worksheets, all the work sheets other than the 1st worksheet should be deleted.
View 2 Replies View RelatedCurrently I have a spreadsheet with the following columns.
A - company name
B - Company expense date
C - company expense amount
There are many different companies, and each company has multiple rows for different expenses.
How would I create a drop down box, where I can select the company name and have excel create a list of all the expense amounts for that company?
I want it just to give me a list of every instance a certain word is used in a column, just like on the autofilter. But each value should in the cell beneath.
Basically I have a list of clients, now when using the autofilter I can select to see the cases from just that client.
But what I want is it to list all the clients relevant to certain months in a column.