I am trying to cut and paste formula's from one workbook to another and they often have vlookup's into other sheets within the original workbook. I have renamed the sheets in the new workbook exactly the same but when I cut and paste the formula's the vlookup formula is still looking up in the old workbook. I then have to manually fix it by deleting the [old workbook] out of the formula.
Code: Sub COPYCELL()Sheets("Distribution").Select Range("B7:X84").Copy Windows("SecondWorkbook.xlsm").Activate Sheets("Distribution").Select Range("B7:X84").Paste End Sub
Basically I want to copy cells B7:X84 in the current workbook on the Distribution tab and paste them into Secondworkbook.xlsm that I have already open on the Distribution tab in the same range. There are graphs though so
I am not sure if that has an impact. When I do it manually I copy and then paste into SecondWorkbook and then I copy what I just pasted and paste special values.
I have several workbooks (around 100) that I need to grab a certain range out of (C2:C4). Contained in this range is a title and two numbers stored in row format. I need to copy this same range in every workbook, transpose the information and then insert the information in the consecutive rows.
Right now I do it manually and it takes a lot of time I want to set this up so I can import it into a ms access table at some point.
Why isn't my copy and paste working between workbooks? We use excel 2000. I've resorted to using a lot of selection because I can't seem to figure out what is going on otherwise...
I'm sure this should be much simpler...
Sub PortData() Dim wbA As Workbook, wbB As Workbook Dim ws1 As Worksheet, ws2 As Worksheet, ws3 As Worksheet, ws4 As Worksheet, ws5 As Worksheet, ws6 As Worksheet Dim sPath As String, sName As String, bTextSwitch As Boolean Dim nLast As Long Dim i As Long
I have two files; Budget & Actual. Wish to copy the value in "B17.B71" from "Budget" file, sheetname "ABC" to "E8" under file "Actual". I tried this macro from my notebook and it works fine. However when I tried it on the company desktop, it fails to work. Error message: Runtime error '9': Subscript out of range. (Windows("Actual").Activate" is highlighted)
I am trying to find out if it is possible to create a macro in an excel workbook that will open another workbook saved on the computer, perform a find, copy specific data, and paste it in the opened/active workbook.
I have attached two Workbooks (OLD.xls and NEW.xls). I update this report weekly, but must always copy the previous week's status data (OLD.xls) into the new report (NEW.xls). Under each row, I enter a status update that pertains to the job (row) above it. When I run a new report, some data is removed and some is added to NEW.xls. (Details in the attached Workbooks)
I need to make sure that the proper status is copied and inserted below the new date for the matching job between Workbooks. The variable in column C must be the same in both Workbooks.
I have a standard template worksheet called "Input" (the workbooks name is "Input Capture") which spans C12:U1100.
In addition I have a seperate worksheet which is based in an all entirely seperate workbook called "People Data" (the workbooks name is "Succession Planning") which again spans C12:U1100.
What I would ideally like is a macro which matches the value in column C and populates the entire row (much in the same way as a HLOOKUP, only pasting values) with the exception of columns M and Q.
I have a folder set up on a network drive which contains a workbook for each member of staff (approx 40) to track queries that they receive on a weekly basis Each one of these is called "Query database - Joe" for example. The queries are stored on a worksheet called "Query data" within this workbook and they need to be collated on a weekly basis on a Monday morning and cut and pasted into a master database worksheet again called "Query data" to then carry out analysis on these.
What I am looking to do is have a macro set up that will automatically cut and paste the data that has been input onto each individual worksheet into the master spreadsheet, starting from the next blank line. Each option I have found seems to be set to copy a specific range, or paste to the start of a worksheet each time, rather than finding all of the 'new' data that is there for that week and then adding it to the bottom of the master sheet.
I would like to copy all data from all workbooks stored in one particular folder and paste them into a masterlist. The masterlist and all other workbooks in that folder have the same table header. How do I write VBA codes do the following tasks?
Options (1 and 2 are mutually exclusive): 1. VBA will go to that folder, open all workbooks one by one, if the data is filtered, then deactivate filtermode, and copy all the data but not the header, and paste it into masterlist and loop to the next workbook.
2. Create an inputbox in masterlist that allows user to key in Week Number. Then VBA will take the value, go to the folder and open all the workbooks one by one, apply filtering using the InputBox value, and copy the related data excluding the header into masterlist and loop to the next workbook. (*If the workbook in the folder is filtered, deactivate filter and then only filter using the InputBox value).
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1 Title 2 Title 3 Title 4 Title 5
A2 B2 C2 D2 E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook # File 2 File 3 File 4 A2 Title 5 A3 Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
I had to copy data from child woekbooks (*.xls) and paste it to the master workbook with same page to page every time when a macro is executed i had done the copy and paste part
But I'm Facing the problem in which i had to deal with
Validations as on both master and child sheet validation (column based combo box is activated ) one is worktype 2ns is time type
i jst had to copy data to the master macro works perfectly fine but the problem is that a msg box appears which signifies that i had to change the name (version ) for both types when i click yes 2 times it pastes the data
I'm attaching my macro as well as pic of that msg box with this attachment
how to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
I get 'x' number of workbooks(with one sheet only) everyweek from which I need to copy data and paste to a master worksheet. (SCREEN CAPTURE BELOW)
I am unable to write the code myself as I have never worked on VBA and am only a beginner.
Part I:
The data I need to copy starts from the 19th row (A19:H19). The end point is determined by the row just before the row that has the words "Calibration Request" in it.
Part II: Just below the data that was pasted from Part I, the data from 2 rows below the words "Calibration Request" needs to be pasted. The end point for this would be a blank row encounter.
I have created a workbook with vb code that include 4 modules, 1 userform. These all work in the original workbook. When I copy and paste the workbook onto another laptop, none of the scripts work? Both laptops run the same os plus office 2003.
I tried all failed.We have about 160 different workbooks (one for each business unit) stored online. Staff enters information about their weekly revenue and expenses and here at head office I collect that information and consolidate them.What I am trying to do is that;1.) Create a master Workbook with ~160 worksheets (One worksheet for each unit) named exactly the same with other workbooks2.) And macro can pull the information from related files stored in a certain folderIt is very much like another members problem but I am not sure why I cant get that code working for me? [URL]
Copy over data from different workbooks and using paste special values to paste it into a new workbook using a macro. Here is what I have and what I am looking for:
My file path is
C:Documents and SettingsMy DocumentsProjectCostsDecember12
I also have a workbook called DecMonthlyTotal in the same folder with the same named worksheets.
I am looking for a macro to be placed in the DecMonthlyTotal that will pull the data from the Cashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name Cashable12-13, it will also pull the data from the NonCashable12-13 worksheets from Function1, Function2 and Function3 and paste special the values into workbook DecMonthlyTotal, worksheet name NonCashable12-13
Both the Cashable12-13 and the NonCashable12-13 have Columns A - G The row that the macro should start the copying from is Row 3 for each of the workbooks; however I don't have an end row for the workbooks as this will vary.
Trying to manipulate a macro I recorded to be slightly more dynamic with some VBA code. The macro has saved me a lot of time however each month I have to re-do it due to the date changing and I'm sure there must be an easy way to adapt the below code.
Current Code (it repeats afterwards as there are lots and lots of sheets I need to perform the action on).
What I'm after is a way to alter the range highlighted based upon matching a cell in "Raw Data.xls' and a cell in "Volume Tracking.xlsm".
The cell A43 in "Raw Data.xls" contains a month (which changes every month); if the month is Jan then I would want the Range to remain as AE33. If it's Feb then I would want the Range to be AF33 (and so on).
In "Volume Tracking.xlsm" I have the months in cells AE4 (Jan), AE5 (Feb) etc.
Is there a way to locate the column in "Volume Tracking.xlsm" on row 4 that contains the value found in A43 in "Raw Data.xls" and then paste what was copied out of "Raw Data.xls" C43 and paste it in to row 33 of the correct column that holds the matching month?
If not could I add code to say if cell A43 in "Raw Data.xls" = Jan then paste to AE33, if Feb then paste to AF33 and so on.........
I have a column "g" with this conditional formatting:- =A2<>A3 Format Bottom Border. However I will pass this workbook onto someone else who will fill in the text in column "g". They will use copy/paste text from other cells or columns even other workbooks that will not have the conditional formatting.
I have used Cells > Projection > Locked unchecked then used Tools > Protection > Protect Sheet and checked all. There does not seem to be a way to unlock the cell but protect Conditional formatting. Each time I copy and paste from other non formatted cells it wipes out my formatting.
I have been trying for months to get this to work by altering code from similar requests I've hunted down on google to no avail.
I am looking to have a "Master" sheet that is populated by data from 30+ individual excel workbooks. Each workbook is contained on a server in a directory "O:JobsJobs In Progress." In that directory are subfolders (named in sequence "C12000 Job1", "C12001 Job2", etc) which contain the actual workbook (Named according to number ie. "C12000 Jobinfo").
I would like this "Master" to automatically pull specific values from each C1200* workbook and paste them in a designated cell so that I can quickly look at specific information contained in each workbook. Each C1200* workbook is constructed the same way.
Short Example of C1200* workbook in which data will be pulled from:
Job Number C12000 PM Abe Lincoln Foreman Thomas Edison Contract Date 1/1/10
Is there a way to make the "paste" option in excel "sticky" (that is, so that you can do some other work in excel then come back and click "paste"? currently excel makes you go back and recopy then only can you paste. You cannot do anything between "copy" and "paste".
Is there a way to paste so that the cell is exactly copied? What i mean is, so that the formulas that are copied are pasted exactly as they were (without changing references)? (i get the right result when draggin and moving a cell, except that the original cell is emptied - but u get the idea). A work around is to add absolute refrences, and then take them away later - or to copy the formula in the formula bar and then paste it into another cell (one cell at a time ... )
Im trying to sum 16 different workbooks witha simple formula, but it exceeds the maximum character length. This is the formula I want to repeat for 16 work books:
As you can see, half the formula is the file location! Is there anyway I can develop a formula to examine a range of workbooks in a set location? VBA looks the way to go but I dont have clue where to start! Any help greatly appreciated!
Full formula:
****** http-equiv="Content-Type" content="text/html; charset=utf-8">****** name="ProgId" content="Word.Document">****** name="Generator" content="Microsoft Word 9">****** name="Originator" content="Microsoft Word 9"> =SUM('H:CERNTimesheets2009-2010[Adrian Nolan 2009-2010.xls]Jul'!$H$46+'H:CERNTimesheets2009-2010[Francis Markus 2009-2010.xls
I wanted to compare data entries between different versions of a protected worksheet. The results of the conditional statement [ if(test, true-result, false-result) ] always came back "0" for both paths. Any suggestion other than copying all of the data to unprotected workbooks and then running the tests?
We have two different workbooks (Master & Slave) both the workbooks have one unique column i.e ID. Slave workbook has duplicates ID along with Amount figure. We want to get the sum total of those duplicates ID's amount and single entry amount should also be reflected on our Master workbook amount column. eg
I would essentially like to put information in either A1 or D1 and have the other 3 boxes fill out automatically; is this possible or am I stuck using two workbooks...? Would a circular formula be able to work in my case?
I have several Workbooks ( named 110807, 180807 upto 100508) which include many worksheets(Lets say named Mon, Tue, Wed etc). The format of these workbooks is identical but the numbers within are different. I also have a separate " Totals" workbook in the same folder within which I need to calculate the average of all H15 cells across the whole range of Tue worksheets but only if Cell H3 in the same Tue worksheets is >0. The problem seems to be asking for a =AVERAGE(IF formula but no joy.
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.