I got a sumif formula, where I sum the hours if a certain person is represented. =SUMIF(K12:R12;"TW";K11:R11) Hours in row 11 and the person in row 12.
The patern in my excel document is that every second row is hours and persons. Hours on odd row number and persons on even.
My problem is that when I want to copy my formula down, it goes one row down to =SUMIF(K13:R13;"TW";K12:R12) I want it to go two rows down to =SUMIF(K14:R14;"TW";K13:R13)
I'm dealing with forecasting invoices. The main column 'BALANCE' has a formula referencing the previous cell and then adding or subtracting invoices (ENTRY). The problem I have is that I'll put values in ENTRY that I expect to come in at some point but as they arrive I need to change the order of the cells. So I'm constantly changing the order and then it changes the formula in BALANCE. I tried absolute cells (and even found a work around way to flow absolute cells by flowing then viewing formulas then using the replace function but that didn't work.
So my formula in BALANCE is: =$I$173+$E$174-$G$174
but if I move G174 to another cell I'd like to keep the BALANCE formula to stay G174 instead of following the move.
I have to fill out forms for work and some of the info is the same and isd put on seperate sheets. On sheet one I have cells with the information that is the same on the different forms on shhets 2 and 3 i have the forms.
here is what i have having problems doing. 12-47136569 13x129077
How can i do a formula that copies the above values exactually to a cell ona another sheet
I began to ponder a way to copy down cells so that the copying of the formulas results in references as shifting horizontally instead of vertically. One particular reason that this occurred to me had to do with my attempting to use Excel to make more orderly text copied from Adobe.
So, for example, if I copied text from Adobe, I would paste it in Excel. Thirty lines of text would past vertically into a column, from Row A1 to Row A30, with each line of text in its own row. I wanted to figure out a way so that in adjacent columns, I could put it so that I would have a set of formulas reading in =A1 in Column C cell/row 1, =A2 in Column D cell 1, =A3 in Column E cell/row 1, =A4 in Column F cell/row 1, =A5 in Column G cell/row 1, and so forth. I realized that if I copied this down, in the second row, the result would entail references to A2, A3, A4, A5, A6. I would prefer that the references update to A6, A7, A8, A9, and A10.
I have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc) Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6) =AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
is there a way to stick a few row of cells together so that when i move one they all move.. i have some rows that when i sort them i want them to move together with the other ones..
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU() ' ' CopyICUCAPU Macro ' Dim i As Integer
My data, which is downloaded, can be anywhere between H4 and IV900.
I need a macro that will go to G4
Then do the equivalent of arrow right to the first cell containing data
Select that cell and all cells to the right of it
Copy the selected range
Cut and Paste it back to H4
Move to G5 and repeat all the way down the worksheet so that I end up with al of the data starting in column H rather than spread all over the worksheet.
I have some code below that moves pasted data to the left and then pastes it to another page. Trouble is: 1) When the data is moved to the left I would like the spaces in the text to remain e.g. 1 2 2 would become 1 2 2 instead of 122 (as is the case currently).
IF formula to transfer specific text and values from sheet 1 to sheet 2 (please refer to attachment). Sheet 2 should display the name, state and unprocessed rate for each month for individuals with a rate of 95% and 30 or more unprocessed files.
In the attached spreadsheet, I have data pertaining to the amount of money raised for a bunch private equity funds, and the dates when this money was raised.
For a little background, private equity funds raise money in various batches or "closes", so a fund may initially raise $5M in its "first close" and then in its "second close" it may raise another $5M or so. And then a "final close" would be the last time that fund would raise money.
I'm trying to figure out a way to move data in my "Fund Size" and "Fund Size Date" columns to the corresponding "First/Second/Final" close amount/date columns, according to the "Status" of the fund in my Column A.
Essentially, if a fund is either "Fundraising" or "Fundraising and Investing" status, then I would need the fund sizes and fund size dates to populate in the corresponding columns left to right.
And then if a fund is in "Investing" status, the most recent values (or those furthest right) would need to appear in the "Final Close" columns.
s/s is very large and the need is to transfer formulas from one column to another. Column L contains formulas in cells L7:L45 (attachment) - (L7:L326415 in working s/s). Some of these formulas result in a value being given. I need to transfer formulas only from those cells having values to cells three columns to the left on the same row. I do have code which I was using for another application. This puts a formula in the correct places but it is the wrong formula and I don't know how to amend it so that it carries out the required action. Small attachment enclosed for better understanding of what is involved. Or could anyone change the line ".formula = ......" in the following code to make it work??
Is it possible to use offset formula to move to the next row data? I am trying to achieve all H&S data will be captured in sheet 2. I know there is an easy way to do that by filtering it. But I am trying to automate the summary template in sheet by putting a formula from the data in sheet 1 below.
how to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
I need a formula that will take the value of one cell and put it in another cell other than the one in which I am typing the formula. I can't think of how to do this.
I have two columns, A & B (no headers), of information. The columns are not identical, and column B has empty cells scattered throughout the column. For each empty cell in column B, I want to copy the same row of information into it from column A, as if I'm just scooting the information in column A that's on the same row as the empty cells in column B.
This is simple with a cut/paste, but when there's thirty empty cells, cutting and pasting takes time. (What's really frustrating is that I've figured out a few formulas that will copy the information from column A but all the information gets pasted in the column in which I'm creating the formula (say, column F, for example). THAT doesn't help me because the empty cells in column b are still empty!)
I have an Excel sheet with several columns of data, each containing the link to a website. To the far right of this data, I have a column called "Official Source" in which I'd like to copy over any website links containing the phrase "sec.gov" (if there are any, if not than leave the cell blank).
For example, if I have the following data in my sheet:
Column A Column B Column C [URL].... [URL].... sec.gov/Ar
Than I would want the last source to move to column D -
Column A Column B Column C Column D [URL].... [URL].... sec.gov/Ar
The attached workbook has formulas that will return data from category sections that will grow and contract over time.
While it tells me that the total price of the "Active Overdue Customers to be Scheduled" section is 4119...I would like to determine how many in that section also have "Dunn" under the "Company" column.
Every section does not have the "Company" column, and "Company" is located in different columns in different sections.
I have whats going to be a very large "Input" worksheet that has several headings of columns. One of these columns is "category" as in parts of a vehicle, i.e. steering, wheels, rod-ends and so on. Now what I would like to do, is once I type a new row of information in, to have the filter go through and copy said category row into another worksheet where I can have all of them separated on there own.
Here is a picture of my current spreadsheet. So basically I want to be able once I save the file, that it goes through and where it detects Rear-End in "B18" I would like it to select row 18, copy all of its cells and move them into the worksheet Rear-End
I have a task that I need to perform every now and then. And even though I normally find my ways around in Excel, I can't find a working solution for this one.
I have a list of features that I need to match with another list and place them on the same rows in my sheet. The attached file contains 2 worksheets where "Before" shows my normal input, and "Wanted" shows what I need to do.
Cols A-E contains info for the first set of features, cols G and H is the cells I want to move. Please note that sometimes the G and H columns contains info that are not present in A-E, and then I need to move those features around as well. An example is present at the bottom of the "Wanted" sheet.
way to find all the cells in range A1:A200 that partly contain the string "FindThisWord", and then cut & paste each of those cells 1 row above and 2 columns to the right?
In my current spreadsheet I use Offset to change the values of various cells. The problem is that if I make any changes to the columns it throws the whole offset thing off. So, instead of using offset to paste all the data is there an alternative that would work better?
I was thinking maybe I could name a column as a range and then have the cell in that row equal a value.
I have designed a form for my wife to use in school to help teach fractions and decimals.
The children will enter the numerator into a cell (say D2) and the denominator into another cell (say D6) and the decimal equivalent is then displayed to 2 decimal places in a third merged cell (say C8 - E8).
What I would like to do is this:
When the worksheet opens, the only cell that I want the children to be able to enter data into is the first cell (ie D2). When they enter a value (say 1 for the numerator) I'd like the return key to move the data entry to the next cell (which is D6). After this, when they have entered another value (say 3 - they are invesigating thirds for example), I'd like the return key to move to the next numerator cell (which is H2), then denominator cell (H6) and so on.
How do I do this? I have never created forms or macros and I suspect that this is how to do this.
For the first set of fractions that they are investigating, thirds, I'd like to limit their data entry in the denominator cells only (D6, H6, L6, P6, etc) to 3 and reject any other number. Later in the worksheet, they will be investigating quarters, fifths and so on.
How do I do this? I don't want then to use any list or drop-down, simply to type a value into the cell and it be accepted (if it is a 3 when investigating thirds) if it is correct or simply ignored if it isn't. Is this possible?
way, especially if it involves anything complicated like macros. Being active on lots of forums it is quite depressing when I see that someone has answered a poster's question but the answer seems to either assume a high level of knowledge or tends to assume that certain steps are taken without actually stating them.
Worksheet1RangeA contains a list of names in A2:A50 with corresponding scores in B2:B50
These values per name should be copied into Worksheet2RangeB, which contains a larger range of names in A2:A100 and scores in B2:B100. The names have a different sequence than Worksheet1.
Is there an IF (or other) formula that can take a scores from Worksheet1, look for the corresponding names in Worksheet2 and copy the Worksheet1 scores into the Worksheet2 column, each for the correct name?
That means every name appearing in Worksheet1 will have a copy operation of the score to its corresponding name in Worksheet2. If a name in Worksheet2 does not appear in Worksheet1, the score colum in Worksheet2 will get 0 or a fixed value, say 25.
