Okay I'm having a mind block on the best way to create a table from user supplied date and time. Once the user updates the date cell and then the time cell it will return only the data specified provided both arguments are true. This data is provided from sheet one where the data is constantly being added to.
View 1 RepliesI have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
View 9 Replies View RelatedI am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
On a daily basis we have to manually fill in a time sheet, and I was trying to think of a way where I could just copy and paste it into excel and it would show me on another sheet the total amount of hours I have worked over the month. This gets slightly more difficult, as different clients have different campaigns, and you can work on any variety during the day (however, not all of them do).
Typical raw data looks like this:
Client
Hours
Campaign
Rubber gloves
4.1
SEO
[Code] ....
Therefore I would like to combine the data and then send it off to another report that looks like this:
Rubber gloves - SEO
Rubber Gloves - PR
Bottled Water
1/12/12
4.1
2.3
2.8
[Code] .......
This would allow me to keep a check of how many hours I am working on each campaign over the month, and ensure that I don't run over on time. I have the boxes prepared for the 2/12/12, 3/12/12, etc. where I paste the raw data, and let excel break it down and put it in the report automatically.
I have been entering the data manually so far and I'd quite like to avoid a pivot table or chart (but i am open to it).
Drop down menu that can pull data for 1 person at a time from Table?? (Even possible)
View 1 Replies View RelatedI'm trying to count how many times an action happens between a time frame on a certain date.
This is how my data looks and comes to me (screen shot of a small portion of it - there are 22876 cells to count and it's very time consuming to manually):
data by rld2m2, on Flickr
There is no way to separate the date and time with the program the data comes from.
What I'd like to do is count what how many transactions take place between 10/1/2013 12:00:01 AM and 10/1/2013 3:00:00 AM (example time frame) from the above data.
i attach the file so you can look after you read
i have soccer table 1 sheet is "teams" which is the table of the league. 1 sheet is "games" which is the table of games of the league the last sheet called "import by date". in the end of every game day i sent email with the results of current day. for now im copy and pate all results and its not that easy and convenient. i want to make some formula that when i click in import data sheet the date its shows me all the results from that date. i try to do it with pivot table but didnt like how it displayd
I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedAuto date and time using excel macro.
In cell B2 until Z2 I am inputting data.
Once the data has been inputted in cell B2, I like to have date and time to have in Cell B6.
If input in cell C2 then cell C6 to have date and time..
I have been tasked with creating a workbook that will take a time log file (excel) from an electronic time clock and import the dates/time/employee into individual timesheets. The timesheet layout has already been provided to me and cannot change.
Does anyone know how to write formulas that would gather the date range/time in-out/employee information from one worksheet and automatically import it into the appropriate employee time sheet for the week selected?
I have a cell with both date & time and I need to separate this into 2 separate cells, 1 for the date and 1 for the time. Sample is attached for the before and after formats.
View 3 Replies View RelatedIs there anyway to lock down the time & date when I input a data? Assuming I have a TIME formula in column A, and a DATE formula in column B. So when I input any data in column C, A & B can automatically show and also lock the time & date.
View 5 Replies View RelatedI need a function that records the time and date in a cell, say a2, when data in entered in to another cell, say a1 in the same spreadsheet.
This way I can tell when data in a cell in my spread sheet is updated.
I am working on an Inventory Spreadsheet. I have need it to date time stamp that willpopulate a different cell /field when text are entered in a different cell/field and will not change all the previous dates entered on the spreadsheetevery time I re-open the spreadsheet. I formula I am using is =IF(E3<>"",IF(D15="",NOW(),D15),"")and it changes each time I open thesheet to do the inventory so I do not know the date of the last inventory. Iwant to capture the actual date that the inventory was completed in thesecond/different cell?
View 9 Replies View RelatedI'm having trouble while trying to use a variable in a cell reference. I have a sheet that is being used to record the time and date of data entered into the workbook. This sheet is divided into columns, each designated to a specific type of data. I have written a macro to enter the current time in the correct column, but that macro is embarrassingly long and complicated because I used a series of if statements to handle all the different data being entered. I'm trying to simplify by using vlookup, and assigning the column value to a variable, and inserting that variable into the cell reference.
Here is the line I need to insert a variable into:
Sheets("Current").Cells(Rows.Count, columnstart).End(xlUp).Offset(1, 0).Value = Now()
Where columnstart is my variable. It is an integer, but it's value will change depending on the type of data being entered.
I have a lot of rows of data in this date and time format "2/29/2013 10:00:25 AM" and I would like to remove only the time and leave the date
View 2 Replies View RelatedI have been given a project to develop a spreadsheet using excel that will take data that is for a whole month, and evaluate by DAY to see if the same doctor was listed as attending two patients in surgery at the same time. If the Doctor's name is the same for two patients within the same timewindow for a certain day, a code is applied to EACH RECORD that the doctor was attending in the code field. If there was NO DUPLICATE patient, a different code is applied in the code field.
The tricky thing about this is:
1) Number of records will vary month-to-month
2) There could be 1-xx patient records where the same doctor is listed and there is overlapping time in the SAME DAY OF THE MONTH.
3) The code applied to multiple patients in the code field applies even if the minutes of overlap = 1 minute.
4) Start/End times and length of the patient visits will vary. (Example - Dr. Jones has two patients on the 15th of the month. The start time for patient 1 is 9:00am and ends at 10:15am. The second patient's start time is 9:30am and end time of 11:00am. Under this situation, the multiple patient code would apply)
Does anyone have any experience evaluating by date, then within a time-window to check for record overlap (doctor name in this case)? There could be 200-1500 records per month, and 100/day to evaluate for overlapping.
In the Data tab under Connection Properties, I have "Refresh every x minutes" checked. Question is how do I capture in a cell within a sheet the last time it was refreshed?
View 2 Replies View RelatedI am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I am wondering if there is way to analayse date and time data in a way that would allow me to look at time differences.
I have two columns of data, one has the date and time an entry was made onto a client database, the other shows the date and time an amendment or deletion was made.
What I would like is a formula that shows the time period difference between the two entries.
So for example if one column shows 14/02/2014 14:26 and the other shows 14/02/2014 14:28 it would show 1 (minute) as the result.
I have over 1000 entries to look at and manually it is taking a looooooooong time!
I have a set of data points with date and time shown in the picture. I need to take out all the data point that are at the 30 min interval. Meaning I only want to have the data points hourly only. What can I do to remove the :30 minute datas.
I have tried the find option typing In :30 and getting all the points but then have to replace, which I do not want to do. Need to remove them so they do not show up on the trends ( graphs) I made for them.
This is for excel 2007.
Seems I can't get picture up on the ipad, so the data points look like this
1/1/2012 0:00
1/1/2012 0:30
1/1/2012 1:00
1/1/2012 1:30
And so on for an entire year. Just need to remove the ones with the :30
Trying to create a macro that will add the date & time & initials (i.e 8/26/09 2:34 PM JOD) into the current cell.
I've found plenty of macro's that will do this but it ends up deleting any existing text within the cell. I need to be able to add it in the middle of a text string.
I am trying to create/modify an XY scatterplot using VBA.
I declare local variables and point them to the chart and a new data series for the chart, such as:
Dim chartone As Chart
Dim chartseries As Series
Set chartone = ThisWorkbook.Charts("Chart1")
chartone.ChartType = xlXYScatterLines
Set chartseries = chartone.SeriesCollection.NewSeries()
I set the series data, using an array, such as:
chartseries.Values = Array(1, 3, 5, 7, 9, 11)
I can set the Xvalues to a set of dates by setting .Xvalues to a woksheet range that includes date-formatted data. (like this):
chartseries.XValues = Worksheets("sheet3").Range("m9:m14")
(where m9:m14) contains dates...
i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View Related