Date Not Cycling With Addition Of Time

Oct 26, 2011

Adding date and time. The code is listed below.

I have watched the code while running. The initial date FDateS and FDate(t) value is m/dd/yyyy (9/16/2010) and no time. FDateS has different amounts of time added to it. The issue I have encountered is that once it passes midnight, the date does not change but the time reflects the change to 00:00:00.

Public FDate(1000) As Date
Public FTime(1000) As Date
FDate(t) = CDate(Mid(FindData("sm_Sys_BatchOpenTime"), 1, 10))

For H1 = 1 To n
FDateS = FDate(H1)
For r =1 to 50
FDateS = CDate(FDateS) + CDate(FTime(r)-Ftime(r-1))
Next
Next

View 1 Replies


ADVERTISEMENT

Return Value Of Date Using Addition From 2 Columns That Represent Date And Number

Feb 21, 2014

I want to get a return value of date in column C whereas column A represent a date and column B represent a number. Simplest formula in excel is Column C (Feb 26, 2014)= Column A (Feb 21, 2014) + Column B (5). I want it to have in macro code.

View 14 Replies View Related

Make A Calculation(addition) And Use The Answer To Multiply Against Another Addition Calculation

Nov 19, 2008

make a calculation(addition) and use the answer to multiply against another addition calculation....

The sum of (Monday!A1:A4) multiplied by the sum of (Monday!B1:B4) plus (Tuesday!A1:A4) multiplied by the sum of (Tuesday!B1:B4) and so on.

View 2 Replies View Related

Cell Show An Addition To A Time In Another Cell

Jun 21, 2009

In Cell C4 I have the time 8:00 AM. In Cell D4 I would like to show C4 plus 8 hours.

When I do the simple calculation of:
=C4+8

That doesn't work.

View 5 Replies View Related

Cycling Through 2 Arrays

Jan 24, 2012

I have an array that will open specific workbooks. But Now I need to append a Case Number to the beginning of the file, and I don't know how to cycle through two Arrays. I have been setting it up as:

Code:
Dim Report
Dim Reports
Dim WB AS Workbook
Dim WS AS Worksheet

Reports = Array("Case01", "Case02", "Case03", "Case04")

For Each Report in Reports
Then I open the workbooks and print them.
Next Report

Now I want to add in a 2nd Array, that will Append the 1st item in CRN to Reports, then the 2nd item in CRN to 2nd item in Reports. So it would look something like this.

Code:
Dim Report
Dim Reports
Dim CRN
Dim CRNS
Dim WB AS Workbook
Dim WS AS Worksheet

CRNS = Array("0501202201", "0134851081", "9715288103", "1697774009")
Reports = Array("Case01", "Case02", "Case03", "Case04")

For each CRN in CRNS
For Each Report in Reports

Then I open the workbooks and print them.

Next Report
Next CRN

But that cycled through each CRN before moving to the next Report?

View 9 Replies View Related

Cycling Through Worksheets

Jan 21, 2008

I have 7 worksheets, each worksheet has a range of data, in the first instance 10 numbers in cells A1:A10.

I'd like to copy this range and paste it into another worksheet within my workbook.

Is there a way to do this, possibly using Dim WS as Worksheet and then using a For Loop?

Another problem I have is the necessity to paste the data from a columnar format into a row format, ie A1 stays as A1, but A2 would become B1 and so on..

View 9 Replies View Related

Date/Time Formula: Pick Up A Date With Time Entry On A Worksheet And Place It Into A TextBox On A UserForm

Jun 17, 2006

I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the

Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub


"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?

View 3 Replies View Related

Cycling Through 1 Dimension Of An Array

Aug 17, 2009

Using index, I know passing 0 as the row or column num returns the entire row or column.

So I have an array containing worksheets, and an associated column number:

View 3 Replies View Related

Cycling Through Files In A Folder

Sep 21, 2009

I'm a novice with VB, so go easy on me. I'm trying to write a macro to copy the same couple of cells from hundreds of excel files and paste them into one summary file. What I've written so far is:

View 10 Replies View Related

Cycling Through Two Ranges To Complete Blank Data

Nov 23, 2011

Any way to cycle through two ranges and fill in blank cells. The worksheet has a "header"(A2:H2) that bascially determines how the rest of the sheet will be filled out. This header is subject to change if one of the headers is changes(see PLAN, and TRAN CODE in example).

PLANSSNDATEFUNDSRCTRAN CODEITEM CODEAMOUNT (CASH)56016999-99-9999FBLNK01699161.00022.00033.0060988999-99-9999fBLNK0150595.00026.00037.00

The SRC and AMOUNT(CASH) fields will always be complete. What I'm trying to do is cycle through AMOUNT(CASH) and if the field is not blank to then cycle through crng lookig for blank cells. If the cell is blank it should copy the cell above. This is where I'm headed but it will cycle through the same crng(A3:H3) every time.

Public sub Line_Check
Dim ccell As Excel.Range
Dim crng As Excel.Range
Dim hrng As Excel.Range
Dim hcell As Excel.Range

'skip A1, A2(add code to validate headers)

[Code] ........

View 5 Replies View Related

Convert Imported Date / Time Data To Date / Time Format?

Jan 2, 2013

I have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).

View 4 Replies View Related

Subtract A Static Date And Time From The Current Date And Time

Oct 24, 2007

I have a column of values resulting from subtracting a static date and time from the current date and time.

This means it is constantly updating, which makes it impossible to sort.

All my work depends on sorting those values, though.

View 12 Replies View Related

Converting Text Date And Time To Serial Date And Time

Feb 21, 2013

I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:

01/01/13 00001

No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?

View 3 Replies View Related

Convert Date & Time As Text To Real Date & Time

Apr 22, 2008

I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.

View 2 Replies View Related

Pull Out Daily Staff Location Schedules From A 20wk Cycling Rota

May 18, 2006

I need to pull out daily staff location schedules from a 20wk cycling rota. and produce daily shedules for staff and more detailed for the wolves above.
Attached file gives an idea of what I am trying to achieve.

View 8 Replies View Related

Excel 2013 :: Extract Date And Time Info From A Text Cell That Contains Text And Date And Time

Jul 19, 2014

I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.

THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.

I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.

View 7 Replies View Related

Date/time Macro: Inserts The Current Date And Time In The Selected Cell Regardless Of Where That Cell Is

Oct 20, 2009

What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?

View 5 Replies View Related

Converting Date:Time Text To Date:Time Value

Oct 13, 2009

I'm trying to write a VBA code for converting the date/time as text to a date/time value.

The scenario is, I have three different types of text :
ddmmmyy
HH:MM
ddmmmyy:HHMM

I could have the code working fine with the first two types, but not the last one.

View 4 Replies View Related

Format Date & Time To Show Day, Date & Time

May 21, 2008

I have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.

Before
Format - dd/mm/yyyy hh:mm
Appearance - 29/03/2009 00:30

After
Format - ddd dd/mm/yyyy hh:mm
Appearance - Sun 29/03/2009 00:30

This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?

View 6 Replies View Related

Lookup Sunset Time Based Onrecord Date - Incorrect Time Calculated

Mar 22, 2012

Consider this code:

'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date

[Code] ......

This code checks the need for lights at a facility.

It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.

If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.

If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.

As I step through this code:

WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)

This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)

View 2 Replies View Related

Excel 2010 :: Insert Date And Time In Column Upon Data Change For First Time Only

May 3, 2013

I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.

Note: If the column I already have the date and time inserted before then it should give message record already have date and time.

I am using office 2010.

View 9 Replies View Related

Macro Button Disabled When Workbook Date / Time Created Different Or More Than Time Set

Mar 7, 2014

I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?

what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.

View 9 Replies View Related

Excel 2013 :: Separate Time From Date To Sort Time Frames Over Multiple Days?

Jun 17, 2014

I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.

Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?

I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013

View 1 Replies View Related

Enter Time As 1800 Get Back Date And Time As 9/9/2012 06:00 Pm

Sep 9, 2012

I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"

View 1 Replies View Related

Split Date & Time Cell & Format Time As Hundreth Of Second

Sep 6, 2006

I have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.

Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971

View 6 Replies View Related

Merge Date And Time Columns Without Loosing Time?

Nov 25, 2006

I would like to merge a colum with a date and a column with a time into one to show DD/MM/YYYY HH:MM

I have tried merge cells and it takes out the time and leaves the date only.

View 7 Replies View Related

Copy N Paste Time Date/time Format

Oct 12, 2009

I have a cell with both date & time "10/9/09 3:15" This is put in the current cell by formula which indexes two dif. cells, Now I am trying to copy this cell and paste into another book but like to have only date. How can I do that? Each time I try it gives me the time value in the pasted cell and I cannot even format it.

View 5 Replies View Related

Adding Time More Than 24 Hours To Date Time Stamp?

May 30, 2012

I want to add hours to a date-time cell to get result in date-time.

Format of cell A1 is d/m/yy h:mm AM/PM
Format of cell A2 is General
Format of cell A3 is d/m/yy h:mm AM/PM

I want to add A2 (number of hours) to A1 to give A3.

The formula I used is A3=A1+Time(A2,0,0)

The formula works perfectly fine when A2 is less than 24, but when A2 is more than 24, the date doesn't get changed.

View 6 Replies View Related

Extract Time From Custom Date And Time Format

Sep 23, 2009

I have a file that has the Date and Time combined into one cell. I want to separate the two, and cannot find anywhere on the net to do so!

This is the cells format:
d/mm/yyyy h:mm

Cells look like this:
28/05/2008 12:30

View 6 Replies View Related

Date And Time - Finding Time Taken To Complete A Task

Jun 5, 2012

What I am looking to do is find the time it has taking to complete a task - So the work sheet has four cells (See below) and return the total time with cell E

Cell A Cell B Cell C Cell D Cell E
June 5 10:00 AM June 6 12:30PM ????

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved