I am trying to sum figures within a specific date range in the following formulae.
=SUMPRODUCT(--(Bookings!G$7:G$576=B17),--(AND(Bookings!A$7:A$576>=$C$12,Bookings!A$7:A$576<$C$12+7)),Bookings!J$7:J$576)
Currently I get an error and I am certain it is in this part;
(AND(Bookings!A$7:A$576>=$C$12,Bookings!A$7:A$576<$C$12+7))
This is trying to look for dates that are greater than or equal to the one in $C$12 AND less than 7 days later.
A B C
Date Product qtys
October 4, 2006ADSD403 9
October 5, 2006ADSD403 9
October 15, 2006ADSD403 4
How many skids (Located in column c) of product code (located in Column B) are received between October 4-October 13.
Im Trying to use a formula of countif or sumproduct
so the formula will read the range of cells from A2:A30 to see if the word Hydro is in any of those cells, then if the date range from Cell B2:B30 is from range =>Dec-01-2007 to =<Dec-31-2007, then it will count 1.
[Code] ........
But this formula doest count.
I've tried using a multiple if count if with arrays and sumproduct. I really want it to count the ammount of time the work hydro is used during the month on december .
I have been having problems with a function trying to count data within 2 date ranges.
When inserting the 2 dates required into collum B2 (week beginning) + B3 (week ending) it does not
I have this:
=INDEX(SUMPRODUCT((D:D>=DATE(2013,6,6))*(D:D
The part in green will count the number of entries for the name Johnson & Freedman LLC perfectly fine. However when i add the last part in red i receive a #Value! error.
Col. W is formatted as General and has a data validation for the user only to choose Pass or Fail.
Not sure why it isn't working.
Code:
=SUMPRODUCT(--( 'SCRA'!B26:B29>=Sheet3!C2),--('SCRA'!B26:B29
The attached spreadsheet has a "master" workesheet in which I enter customer info, salesperson info, and date. The totals spreadsheet automatically calculates number of sales, contact value.
I need to modify the following formulas to only calculate the data within a date range shown in 2 cells.
=COUNTIF(Master!A1:A176,PayPeriod!A4)
=SUMPRODUCT(--(Master!A1:A176=Totals!A4),(Master!K1:K176))
=E4SUMPRODUCT(--(Master!A1:A176=Totals!A4),(Master!K1:K176))
I need a lookup or sumproduct or index formula that will give automatically make the date i select fall within a certain time frame.
For example, if the date is 15-Jan-2012, I want a formula to make the cell below make it "Jan 9-15"
I have the lookup data in the attached sheet,.
the formula should go in cell D17.
I have written the formula below that returns to me a total value of all products named ABCD where date is greater than in A3 which works fine.
=SUMPRODUCT(($CE$4:$EW$4>$A$3)*($A$5:$A$85="ABCD")*($CE$5:$EW$85))
CE4:EW4 = date range (Format MMM-YY)
A3 = A single date (format MMM-YY)
A5:A85 = Column of product names
CE5:EW85 = values
I am looking to add to this criteria to return where date is > A3, but only for the next 6 months.
I have a document with the following data
1: NAME
2: DESCRIPTION
3: DATE "12/15/2007" format
I would like to know if anyone knows how I can perform the following. And please excuse me for not writing this very technically I am a bit lost.
if name = "JOHN" and description = "APPLE" count how many apples there are for john.
Now it gets complicated for me because the dates are as follows. Lets say it starts 1/1/2004 the next cell might be 1/3/2204, 1/6/2204, etc all the way to 2008. I would like to find a way to say
If date = day/month/year I would like to count the whole month instead of the individual days. am I making sence? Let me give you another example.
record reads "," represent cells
JOHN,1/2/2204,APPLE
JOHN,1/3/2204,ORANGE
JOHN,2/3/2004,APPLE
I would like to be able to come up with the following
JOHN had 1 APPLE in JAN 2004
JOHN had 1 ORANGE in JAN 2004
I have the the need to show the sum of the product of sheet 2 on sheet 1 if several conditions are met.
The formula is working except for the first array:
=SUMPRODUCT(--(Bid_Circuits=$A2),--(Bid_Week_End=MONTH(D2)),--(Bid_Week_End=YEAR(D2)),--(Bid_Completed))
When I use XL's evaluate feature, XL seems to find the proper data yet returns #VALUE!
I have a worksheet that contains investment security purchases, including purchase date, purchase amount and maturity date, each in its own row. I need to develop a formula that will sum the purchase amount based upon the term in days (maturity date - purchase date) of the investment. The respective rows do not contain the term in days so the formula will need to calculate the days to determine the aggregating criteria described below.
One cell should contain the aggregate security purchase amount whose term is 1-90 days and another cell should contain the aggregate security purchase amount whose term is over 90 days. It seems that SUMPRODUCT with a condition is the best way to handle this; however, I cannot get the correct syntax of this formula.
I have this formula below that counts all matching cells that fall between two dates (a Monday to the next Monday) where S2 and T2 are the dates (one week apart).
I have 52 colums ie one for each week.
=SUMPRODUCT(($G$3:$G$1000>=S2)*($G$3:$G$1000
I have a formula which works =SUMPRODUCT((MONTH(F7:M7=2) *(F12:M12="S"))) but only calcautes the S over certain dates. (F7:M7) Are the dates. i need to incorporate the today formuala so it works from 12 months from today. 12 months rollings (so figures wll change daily).
01 January 2014
02 January 2014
03 January 2014
04 January 2014
05 January 2014
06 January 2014
07 January 2014
08 January 2014
#########
#########
[code]....
Trying to sum values in column A, if values in column B have a range between 0-9.
or can we use less than < 9.
using Sumproduct formula
Can someone tell me what I'm doing wrong for the weekly sums in this spreadsheet? The monthly sums work fine.
PS I can't use pivot tables. This spreadsheet is a quite small part of a more expansive set of worksheets, from which I am pulling data.
The following formula works perfectly in Excel 2003:
=SUMPRODUCT((A2:A10="A")*(b2:b10="B")*(c2:c10="C"))
However, I've got a fourth column that contains either a date or a blank cells; I want to limit the formula to only include certain dates in the sum. i.e:
=SUMPRODUCT((A2:A1000="A")*(b2:b10="B")*(c2:c10="C")*(d2:d10>="01/04/2014"))
Rather than an error it's just retuning an incorrect number.
Looking to troubleshoot using a name range in a multiple criteria sumproduct formula.
For instance, this formulas works fine:
[Code]......
But, when I try to substitute the two-alpha codes as a defined name range ("keys"), it errors as "N/A":
[Code].....
An example workbook is attached : Example Workbook.xlsx
I am keepting track of all the calls i get so the range changes daily. In A
is the date and column J is who took the call.
Is there any way to take this formula and have it refer to one place for the
range end as my table grows?
=SUMPRODUCT((MONTH(Data!$A$5:$A$670)=MONTH($A25))*(YEAR(Data!$A$5:$A$670)
=YEAR($A25))*(Data!$J$5:$J$670=C$18))
(SUMPRODUCT(--('Job'!$F$2:$F$1000="CCTV"),--('List'!$S$2:$S$1000="pass")))
There is another column with 'released' date (date the job was raised)
How would i implement a formula to calculate the average age of a certain job type in the above example?
I have below four column range. I need a formula to sumproduct column A and column D, where column B = "n1", column C = "xyz" and until sum of column A reaches first largest value which is less or equal to a variable, say 15. So, the rows would be 1st, 2nd and 5th. And the result - 1,440.
A B C D
2n1xyz110
5n1xyz112
8n2abc112
3n1abc111
6n1xyz110
6n1abc114
3n1xyz114
2n1abc112
3n2xyz114
8n1xyz114
8n1xyz115
4n1abc115
I have worked our an CSE formula below, but it is really massive. Need to have much simplier one.
={SUMPRODUCT(--($C$1:INDEX($C$1:$C$12,MATCH(LARGE(IF(($C$1:$C$12="xyz")*($B$1:$B$12="n1"),$A$1:$A$12),COUNTIFS($C$1:$C$12,"xyz",$B$1:$B$12,"=n1")-SUM(IF(FREQUENCY(IF(MMULT(--(ROW($A$1:$A$12)>=TRANSPOSE(ROW($A$1:$A$12))),--IF(($C$1:$C$12="xyz")*
[Code]....
I have a sheet with data in A1:A50 also in B1:B50 and amounts in C1:C50
I calculate using the formula sumproduct((a1:a50="yes")*(B1:B50="RED")*(C1:C50)). How can I change this to allow for rows being added on a regular basis.
I am performing a sumproduct calculation in an array form. The first three columns in the data table have criteria, " Name", "Letter" and "Multiplier". The following 5 columns have days of the week, "MON", "TUE" etc. What I am trying to achieve is to use a sumproduct array to muliply the "Multiplier" criteria against a particular "Day" criteria when "Name", "Letter", and "Day" criteria match a series of reference cells. What this requires me to do is to define the "Day" range of values differently when I change the "Day" criteria. How do I create a variable range?. example file attached.
View 4 Replies View RelatedI'm getting adding values from a worksheet using sumproduct. The formula is as follows:
=SUMAPRODUCTO((Datos!$F$2:F459)*(Datos!$A$2:A459=Tendencias!E3)*(Datos!$C$2:C459=Tendencias!$A$5))
But when i replace the range from row 459 to row 55000 i get the NA.... i need the range to be as big as possible as i keep adding data on a daily basis.
what do i need to add to the formula?
I have a problem with a sumproduct formula which check one coloumn for negative numbers and another for a date so that it count all cases of negative numbers in a month i choose. (S contains numbers and AH contains dates)....
When i use it in a makro i get a "type mismatch" when i run the macro. I wonder if anyone can see where my syntaks is incorrect? Here is how it looks in the macro:.....
What is the formula for sumproduct to count a say column c for a range of names and as long it match column k for yes.
View 1 Replies View RelatedI have a "RANKIF" formula using SUMPRODUCT:
=SUMPRODUCT(--($B4=$B$4:$B$100),--($F4
I have a series of incident reports (some of which are injuries), and I'm calculating the number of incidents per body part per month using:
=SUMPRODUCT((ISNUMBER(FIND($D4,owssvr!$Q$2:$Q$2188)))*(MONTH(owssvr!$A$2:$A$2188)
=MONTH(math!F$2))*(YEAR(owssvr!$A$2:$A$ 2188)=YEAR(math!F$2)))
In which D4 is the body part (Neck, for example), owssvr is the sheet with the records being summarized and F2 contains the month being queried.
The problem I'm having is that I want to calculate data for a region of the body (head & neck), which will include count any record that has a part of that body region (nose, face, eye, tooth) mentioned in the affected area text. If I simply sum all the values calculated for each body part, records that include multiple parts (e.g. "scratched nose and eye") will be counted twice.
Can I calculate whether a range of cells for the incidents contains any of a specified range of body parts (listed in D4:D15), but do this for each month, and count each record only once (e.g. "cut nose" = 1 record, "cut nose & eye" = 1 record).
Is there a simple way to include the values of an entire range?
This is what I tried, but I get #name
Code:
=SUMPRODUCT((Datasheet!J2:J65000 = Range("C3:AA3"))*Datasheet!F2:F65000)
If I use a single cell it works, but only with what matches that cell.
Code:
=SUMPRODUCT((Datasheet!J2:J65000 = C3)*Datasheet!F2:F65000)
I'd like the criteria to match anything in that range C3:AA3. Do I need to specify each cell individually or is there an easy way have it use the entire range's values for its criteria?
Why won't this SUMPRODUCT work?
SUMPRODUCT(Sheet2!D1:D2000=OPEN,Sheet2!F1:F2000)
I have a range (D1:D2000) that contains a 'Status' value.
OPEN is a named range that refers to eight possible Status values: Assigned, New, Hold, Re-test, In Progress, Failed, Ready for Push, Coded
The formula should sum the values in F1:F2000 for any row containing one of the eight statuses in D1:D2000.
