1. I need a script to retrieve data (member number) from "Search List" worksheet and then to search it in "Members List" worksheet.
2. Once the search result (member number) found, e.g. 00311, it will copy the entire row to the "Only Selected" worksheet.
I have also attached a sample excel for better understanding.
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies View RelatedI did a search to find a question similar to mine and I found this:
Copying data matching a criteria into another spreadsheet
This is exactly the same concept I am trying to accomplish, but don't know how to...at all. I couldn't follow the thread either.
I have a schedule which is constantly being updated (simplier version attached). I want to create a schedule, which will:
1) First ask which region to display the information for (I would like to create the same pop up menu to choose from)
2) Then, it will select only that region's information (all rows & columns) and copy them into a new worksheet and lists it all
-if you go back to the Master List, you can again choose another Region and it will create another new worksheet with that region's information
3) Don't know if this is making things more complicated, but at the bottom of the attached file, there are 3 lines under "Land".
Is it possible to list these under the same spreadsheet as the region it is pertaining to but classify it separately under "Land" (ie leaving space, so it is clear this is separate
I have a spreadsheet with 3023 rows and columns A-L. Here's a small sampling of Column A (with heading "sku" included, copied exactly as it appears in the spreadsheet):
A
sku
3102-0400-100000
3102-0400-200000
3102-0500-100000
3102-0500-200000
3102-0600-100000
3102-0600-200000
3102-0700-100000
3102-0700-200000
I need to delete every row in which column A includes the text "200000".
Although the above sampling shows "200000" appears in every other row, that is not the case in all 3023 rows.
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
if there's a macro that can be run to check one worksheet. In this worksheet there is a column where the value should be "true". If this value is true, I'd like to copy the entire row of data into another worksheet.
There can be multiple rows of data where this condition is met.
need a formula to calculate the total number of x's in one column (column B, C, E are training types= x) where the corresponding column date falls within a date range. It’s to total each type of training done for each month. I have 3 training type columns and a cell that calculates the total number of trainings for the each month:=COUNTIF(F2:F100,">="&DATE(2008,2,1))-COUNTIF(F3:F200,">="&DATE(2008,2,31)).
So now I just need it broken down by training type per month. How many x's in each column for February as an example.
I'm looking to create a macro that copies a row of data and pastes it within a range when a condition is met. For Example, if A1 of the header Row matches A2 within a Range of A2:A100, I want to Copy the A1 Row and Paste Special Values over the Match in A2. Likewise if the match is contained in Row 100, I would like to Copy from A1 and Paste Special Values into A100.
View 2 Replies View RelatedI Have workbook-1 with 5 cells and 10 rows and in 5 th (E) cell i have value of 1 or 0 .
i want to selectively copy entire rows which has value = 1 in cell(E) and paste these rows into 2 nd row(A2 cell) of workbook-2 using Macro
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone
Vodafone
Ericsson
Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
"copy cell range based on conditions" and it didnt really get an answer. There was one that copied the info the next blank cell on that line, but im not smart enough yet to figure out how to copy it over. ( getting there though with lots of staring at code).
2 sheets. I have already created auto modules to fill in data and code,and sorted the columns so they are in line.
Sheet 1. Info : has 9 columns. So if column = 9 and the value = new.
Then i want to copy the range on the columns (A:G) and then paste it on the other sheet ( Card info) as long as Column A is empty ( as in next available blank cell) ( something like a DO while worksheet("Card info").column(A) <> ""
I have a bunch of data (by date) on one worksheet and I want to output results to another worksheet (in the same workbook). I want to be able to alter the rolling period for some financial calculations (thus the rolling period countdown). The code I've written doesn't suck the data from the second worksheet. The first worksheet is where vba is launched from. I've attached all the code.
Private Sub CommandButton1_Click()
Dim rowworking As Integer
Dim rowoutput As Integer
Dim rollingperiodcountdown As Integer
Dim Date1 As Date
Dim expectedreturn As Single
Dim returnwithedc As Single
Dim trackingdifference As Single
Dim returnwithbetamodulation As Single
Dim betamodulationtrackingdifference As Single
Dim improvement As Single
Dim x As Integer
Range("a5:g15000").Select
Selection.ClearContents
Range("a5").Select
For rowoutput = 5 To 500
Worksheets("Rolling Period").Activate
For rowworking = 3 To 15000
rollingperiodcountdown = Cells(rowworking, 9).....................
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
I attached a spread. On the data tab, I have 2 criteria that I would like to use to move rows to another sheet. Columns U and W. An example would be that all rows that have a coil in Bay "B" and are allocated would go on the "B Allocated" sheet. I would also like this to automatically update when I delete the data in the data sheet and put new data in.
View 4 Replies View RelatedA friend is trying to change an entire row's color based on a specific cell's value in that row. He cannot use conditional formatting. This is the code he's tried, to no avail:
Sub temp()
totalrows = ActiveSheet.UsedRange.Rows.Count
For Row = totalrows To 2 Step -1
If Cells(Row, 25).Value = 4 Then
Rows(Row).Select
Selection.Font.ColorIndex = 3
End If
Next Row
End Sub
I need the macro that looks in to say Column H sheet1, if value ="true" then copy cells in column A, B, D, F to Sheet2.
View 2 Replies View RelatedI have a workbook with many (25) worksheets which all have the same structure, column headings, etc. but vary as to the number of rows. I would like to search all worksheets in workbook and copy to worksheet "120" only those rows where column C is "120" and column E is "1-00053-".
Ideally, input boxes would be used to enter these criteria so that it can be used for different scenarios in which these values will vary.
I have a filtered list of data expanded to "all" in each column. One column is "percentile" (25%, 50%, 75%, etc).
Search down the "percentile" column until you encounter 25% as an entry, then sum a number in the same row from a different column with each 25% entry you find.
I have been struggling with a way to use an IF statement that determines if a cell in column B = 1 then copy that cell and the two cells next to it to a cell starting in range B50. Once the condition is true would want it to copy another below and so on.
B C D E D
1 E10 Rear door failed BL OK
2 B4 Clearance light inop. KL OK
2 C1 Fire extinguisher date expired KL Ok
1 E1 Bumper falling off BL NO
The first and fourth row have a "1" in column B. So as a result these two rows meet the condition and want to copy just the cell in B thru D. Results would look like below
First entry copied to cell B50
1 E10 Rear door failed
1 E1 Bumper falling off
I would like to perform a search on only the worksheets listed in a worksheet titled table of contents. I would like to use multiple criteria for this search and send only the unique results to a worksheet titled results. Each worksheet listed in the table of contents has a cell address for each heading that I would like to extract data from the same column. The attached workbook example shows the data that I would like to collect when I search for cells that begin with "AB" and cells that begin with "CD". I collected this data by copy and pasting all the data from each worksheet into the results page and then applying filters and advanced filter to remove duplicates. This method does not work well for the original workbook as the data is quite extensive.
Create_List.xlsx
I have set up the attached workbook to try to show the results that I need using the matching shaded cells in the worksheets.
The first part of the problem is that all data in columns A, B, C & H (Input1) needs to be copied to columns A, B, C & F in Input2 with the addition of a Zero value in columns D & E (sample data lines 1 - 3).
The second part of the problem is that all data in columns A, B, & F (Input2) where the cell in column C is equal to ZERO needs to be copied to columns A, B & C in Input 3 (sample data Lines 4 - 11).
It would also be useful to be able to copy data in columns A, B, & F (Input2) where the cell in column C is NOT equal to ZERO to columns A, B & C in Input 3 (sample data Lines 12 - 25). However, there will be often be more than value in column C (Input2) dictated by the date in Column A and number in Column B. The value in Column F (Input2) will always be the same for each of those rows, so it does not need to be duplicated in Column C (Input3).
This would have to be manually triggered by linking it to a button or menu item, not sure what would be the best option. As data is entered at various times of the week, the routine would either have to overwrite existing matching data or carry on from where it last finished!
I would like an easy/fast way cut an entire row of data from one worksheet ("Open Work") to another ("Closed Work"). Each worksheet has a matching Header Row from column A - N. In "Open Work" I have column "K" with various values, but I'm looking specifically for the "CLOSED" value. If a cell in column "K" = CLOSED, I want to cut the entire row and paste it into the other worksheet "Closed Work".
That was a no-go! It copied limited rows AND duplicated them.
VB:
Sub copyrows()
Dim tfCol As Range, Cell As Object
Set tfCol = Range("A2:A9") 'Substitute with the range which includes your True/False values
For Each Cell In tfCol
[Code] ......
I want to do the following:
If cells in column B from Sheet 1 contains ''text'',
Copy Cells from column D and F from Sheet 1 - TO - Sheet 2 in columns C and E -
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies View RelatedI deleted the data and made up some figures but kept the format to protect privacy. Highlighted blue and green because it's possible to have the same name have 2 different types. I put in dashed lines to more clearly divide months.
1. For each UNIQUE "Name" and "Type" add a new row starting from last entry
2. Copy A,B,C to new row
3. Copy LAST (most recent) "End Balance" from column "I" corresponding to last person
4. Copy column "I" formula into new role
So Name, ID#, type, column D and the formula in "I" (excluding "Name" and "Type" duplicates) should be added to the end of the sheet with their new row
Unsure if possible:
5. Make old amounts (columns D,F,H,I) not count towards the totals
6. Totals reflect new amounts only so values aren't counted multiple times
exampleforforum.xls
Now what I am looking to do is search my spreadsheet for specific criteria and then copy and paste these rows of information to a new sheet.
In my first spreadsheet that I am using as a database, I want to be able to select any entry from the month and copy it to another spreadsheet named for that criteria.
In other words, I want to find every entry for January, copy just that data's rows and paste them to the January spreadsheet, February to February, etc. My date fields are in column A.
I also want to do the same with representatives names found in column B.
This will break down the data for each rep and each month. Using the filter, then copy and pasting would be cumbersome.
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".