I have defined 2 dates ( Starting and Ending ).
Sub Define_Dates()
begdate = InputBox("Please enter the Beginning Date in MM/DD/YY Format")
enddate = InputBox("Please enter the Ending Date in MM/DD/YY Format")
End Sub
I need to delete any row (from LR to FR Step -1) that Col M ( Date ) is outside the Beginning and Ending Date.
I have a column of dates (B2:B1500) that I want to compare to a single date (A1).
If the dates in Column B are older than the date in A1 I want to delete the entire row.
look at the attached file - it was a CSV file. i want to convert the column of dates to say Mar 14 2009 type date. but it only converts some of them.
note some are on the left and some on the right.
The attached workbook has dates in column C, although some of these dates are just strings.
I'm trying to write some vba that will tell me how many of the cells in column C contain a date (or looks like a date) that is greater than (after) the real date in cell G1.
At the moment I loop through the cells in column C and can ascertain, which dates can be counted, then copy one row over at a time, but I'm looking for a slicker (perhaps one-liner) answer, perhaps by copying a block of rows in one go. The aim is to copy those rows to another sheet. There are many more rows than in the attached, and many sheets to process, and I have no control over the format of the dates/strings in column C. Currently it takes about 20 seconds to copy over the necessary rows, but I'm looking for it to happen much more quickly; current thoughts are to sort on column C (sorting on column C anything that looks like a number as a number - which has it's own problems!), have a count of dates satisfying the criterion (say using a worksheet formula such as COUNTIF or SUMPRODUCT, perhaps also using EVALUATE) then copy a block of rows in one go.
not very relevant, but the existing code is something like this which highlights rather than copyies the rows(included in the attached): ...
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm using Excel 2010. I need to populate a daily calendar with the number of nights spent, extracted from the Date of Arrival and Date of Departure of individuals.
View 2 Replies View RelatedIn the expense log, Column C is a list of Dates and Column I is a list of expenses. I want to Sum the expenses in the 'Expense Log 09' to a new sheet based on a Date entered in H24 on the new sheet. I have tried the formula as shown below and Get the result #NAME?
=SUM(IF(Expense Log 'Expenses Log 09'!C8:C100,H24,'Expenses Log 09'!I8:I100)). I would Like to SUM all expenses After the posted date including that date.
I am trying to do is to get rid of "/2010" and just have a fraction such as 4/5 rather than 4/5/2010. I tried find and replace and that doesn't work and I also try converting the format for the 500 cells to dd/mm but in the Fx formula box I still get 4/5/2010 rather than just 4/5. Also I should mention that I tried past special-values when I converted the data to dd/mm and I still get the dd/mm/yy.
Currently, I am working on a macro to see if I can just simply delete "/2010" and replace it with nothing.
I have a list with start dates. These go back about 2 years and forward about 2 years.
What Im after is deleting anything older than say 30 days and anything in future more than say 120 days.
I have found various codes with varying success. This one works a charm....
[Code] .....
the problem is, I dont want the text boxes and would rather I had something like a =today() - 30 OR = today() + 120.
I wondering if it's possible to create a code to have a popup where the user can enter a date in mm/dd/yyyy format and then all rows containing that date will be deleted.
View 9 Replies View RelatedI need help deleting rows which contain a cell with date / time in the format dd/mm/yyyy hh:mm if the value is older than the current date / time
any ideas?
I use the following macro to delete the columns with duplicate dates in it. It works ok but when a date is duplicate more than once – say 4 time – it only delete 2 of the 4. I want it to delete all duplicates (entire column) and only leaf the last one to the right.
Sub DeleteExtraDates()
Dim c
For Each c In Selection
If c = c. Offset(0, 1) Then
c.EntireColumn.Delete
End If
Next c
End Sub
I've found similar queries on the site, but none seem to handle multiple dates, and my attempts so far have been futile!
Requirement:
I press a button on Sheet1 and am prompted to enter a start date and an end date.
Depending on the dates I enter, all rows on Sheet2 which fall outside the Start/End date range will be deleted.
All dates to be checked against on Sheet2 are in a single column, and all rows are populated, there are no blanks. Dates are in the format dd/mm/yy
Basically I have a list of employees. This list is simple in that it shows their off time "From:", "Till:". in columns to the left of there name. So in Cell A:A would list all of there names.. In the example sheet I have just a few listed. To the left of their name if "From:" (column B) and then "Till:" (Column C). And this From, Till repeats itself for several columns so that multiple off-times may be made for each employee.
Basically what I want to do is delete any sets of dates that are expired (based on the "Till:" date) and shift the remaining dates over. So in other words, if Sam has a date in there of 8/1/09 to 8/1/09 meaning he is going to be off for just that day, and today's date is 8/2/09, then that "from" and "till" date of 8/1/09 to 8/1/09 would get deleted from his list and the remaining dates (if any) would get shifted to the left.
Hopefully I have provided a good enough explanation of what I am trying to do here.. Please let me know if you have any questions! I have provided an example the reflects my setup (and the setup can be changed if it makes anything easier)
I am fitting 2 sets of data to match eachother. I want to have as much data as possible but only for the same dates of each dataset.
I have 4 coloumns.
Dataset 1: A is date B is data
Dataset 2: C is date D is data
I want to compare A vs B one row at a time. If they are not similar it should delete and shift up the values in A+B or C+D according to the lowest value (date) of A vs B.
Remember that if the macro just deleted and shifted up it should compare the same (undeleted) value against the new value that just shifted up in the other coloumn.
I have tracker, where Cells in Column F have dates or are blank.
I am trying to run a macro to delete all rows when the following criteria apply:
for all cells in column F, if date < 1-Oct-2013 then entire row should be deleted if cell is blank - nothing should happen This is what I got so far - but it is not working...I have entred the date "10/1/2013" in cell AA2 but macro should always check against that date (not variable) so it might not be needed.
Sub PART3_Delete_old_team_members()
Columns("F:F").Select
Selection.NumberFormat = "m/d/yy;@"
Dim endrow As Integer
On Error Resume Next
endrow = Sheets("Global Team List").Range("F900").End(xlUp).Row
Searchdate = "AA2"
[code]....
I am using Excel 2010 and I need a macro to delete all text from cells and leave the dates.
Below is an example of the contents of six cells. Some have just text, but some have text and dates.
1st Time Attender: 4/8/20121st Time Attender:1st Time Attender: 4/5/20122nd Time Attender:2nd Time Attender: 4/8/20122nd Time Attender: 4/5/2012
In this example, I would want the new cell contents to be:
4/8/2012
4/5/2012
4/8/2012
4/5/2012
i am trying to see if a date is between 2 dates. i have a sql dump and want to create additional colums before creating a pivot. each line was created with a date and i want to create 2 new colums financail year, month. not sure if it is possible with vlookup and that is about as advanced as i get. attached is a summary table.
View 5 Replies View RelatedI think I need macro to do this but not sure.
I have a variable start date in cell A1 and end date in cell B1.
Lets say, start = 04/01/07 in A1 / end = 3/31/10 in B1 (date format used = mm/dd/yy)
I am looking for a way to partition these out in subsequent columns as follows:
A2 and B2 would = 04/01/07 and 12/31/07 (this section ends at the end of the first year specified in cells A1 and B1).
A3 and B3 = 01/01/08 and 12/31/08 respectively
A4 and B4 = 01/01/09 and 12/31/09
A5 and B5 = 1/1/10 and 3/31/10
I would like to be able to enter any start/end date values into cells A1/B1 and have the cells directly underneath split these dates out chronologically as described above.
The number of populated cells in rows underneath would need to grow dynamically based on dates input in cells A1/B1.
I have been chatting up mr.excel.com to many coworkers recently. Excel is becoming a big deal at my office. I hope to see them chekc this site out.
I have this script it does exactly as i want it to do, filter a table of date using two selected date in D3 and D4. There is only one problem: when i choose the dates and run the script it changes them around it around.
e.g
cell D3 = 01/11/2006
cell D4 = 01/12/2006
so it should just show all of november (11)
but D3 will filter using 11/01/2006
and D4 will use 12/01/2006
Sub DateFilter()
Range("a8:r323").AutoFilter Field:=1, Criteria1:=">=" & Range("D3").Value, Operator:=xlAnd, _
Criteria2:="<=" & Range("D4").Value
End Sub
In A8 I have a number 1 - 5.
This identifies the weeks in a month 1 - 4 for four week months. The 5 is for a five week accounting month.
In A9 I have a day of the week it could be any day formatted as dddd
In A11 I have the 1st day of the month 01/01/2007 formatted as ddd/yyyy
I need a formulae that will look at the number in A8 i.e. 2
Then look at the day in A9 i.e. Tuesday
Then look at the month in A11 i.e. January
Based on all of that I want it to return the date of the 2nd Tuesday in January 2007 in B11.
In a five week month I need it to return the last Tuesday of the month.
Weeks per month are show in starting in D11 for January.
I have a formula that tries to determine if a date is between two dates. The formula I have is =IF(AND(A1>=A2,A1<=A3),"yes","no")
a1 = 7/31/2009
a2 = 8/1/2008
a3 = 3/31/2010
If the date is between those two dates then "yes", if not then "no". I tried this formula a couple times and it works when a3 is 3/31/2010 but when I try 3/31/2009 for example it does not work. So it seems like there is something wrong with the second date I am referencing.
formula to input to excel to get the dates rolling down in A cell i want it to go A1(1/1/2014) A2(1/1/2014) then a3(2/1/2014) a4(2/1/2014) a5(3/1/2014) a6(3/1/2014) i have a lot of these dates to put into excel
View 5 Replies View RelatedI have a date that has to be amended every now and then because the date is changing (bcoz of Night Shift), hence, I need to know a formula that.
IF Time is within 8:00 PM (Aug 15) until 5:00 AM (Aug 16), the Aug 15 will prevail.
I have a spreadsheet with reference relating to dates that are listed as single days. I am trying to convert the single dates relating to a reference to a from and to date but i'm having problems.
Example
048051_14110/09/2013
048051_14111/09/2013
048051_14112/09/2013
048051_14113/09/2013
041929_14115/10/2013
041929_14116/10/2013
041929_14117/10/2013
041929_14118/10/2013
I want this to read
048051_141from - 10/09/2013 - to - 13/09/2013
041929_141from - 15/10/2013 - to -18/10/2013
I would like to know the function/syntax for determining the due dates given certain date ranges.
See attached sheet for the example : due dates example.xlsx‎
I have a spreadsheet that lists items in column A with a start date in column B. What I need to do is in in column C list the next review date in increments of 5 days, but I only want the next day to show from the current date, not the inputted start date.
For example:
Column A Column B Column C
Item Start Date Next Review Date
Item A 12-Sept-09 27-Sep-09
Can I get a formula to calculate the increments and only show the next calendar date for the review, and then to change to the next date once the previous date has passed.
Alternatively, I have another sheet in my workbook that calculates the dates, is there some way I can display the next future date in a line of dates?
I have a cell pulling the date from another page and the dates comes across as "2/1/2013- 4/15/2013"in cell B2 and I have the code in sheet 1[code]=IF(OR(Safeway!A43=""),"",Safeway!A43)[code] pulling data from the sheet 2 already in the middle with a code for later use to hide a certain character. I have a condition code set so if the date is past current date, it will turn red but with the 2 dates in the same cell, I am unable to get it to turn red. How do I go about only having the 2nd date show up so the condition works while already having this one code in the cell? I attempted to add the early stages of this program for review.
View 5 Replies View RelatedI have a problem regarding month formatting
I have 12 columns, Jan 2013 - Dec 2013.
I need to set a format in which if I enter a num eg 15 on the Jan Column, format comes as "15-Jan" format
or If i type 20 on the march column , it comes as "20-Mar" format
I would need it in Date format, because I would be comparing dates later on.
How to change the date automatically depending on the instructions. If the date of the medical certificate of the Government (MCG) included, automatically private medical certificate (MCP) date will change to the rear on the day before the Government's medical certificate given if the date overlaps
View 3 Replies View Related