Does anyone know of a macro that can take values in a daigonal and put them in a single column?
Like for example... if you refer to the attached image, I basically would like to select all the diagonal values in red then put them all in a single column.
I have a table with data representing $income vs %Debt burden respectively. The data on the table per respective intersection provides number of accounts and total ($)value of accounts. I have tried to combine the two pieces of information into one column and have a diagonal line separating the two numbers. (sample table attached).
View 2 Replies View RelatedHow do I paste text from a column into a diagonal line of cells (i.e. A1, B2, C3, etc.)? Additionally (and this may be related), how do I get the cursor to move to a diagonal cell after an entry? (as opposed to down or to the side)
View 2 Replies View RelatedOk I'm writing an extraction formula. I've got my array of Trues and Falses, but now I need to go through each row and check if all the columns are TRUE, and then return the row if all the columns are true.
Right now I'm just working with a dummy set of data... my real table is some 50 columns wide and over 300 rows, but this gives you the idea of what I'm doing:
I tried putting in a Countif and using it like and array to count the different rows and return the number of times each row was returned... but countif goes nuts when you try an array for the criteria.
Formula:
=IF(IFERROR(($H$2:$J$13/B$1:D$1)>=1,TRUE),1,0)*IF(IFERROR(($H$2:$J$13/$B$2:$D$2)
I created a spreadsheet for use by the shipping department where I work. We are trying to prevent pulling and shipping the incorrect item to the customer. This is how it works. The employee downloads a CSV file containing items that have been purchased from our website and imports the file into the excel. Then the item is pulled and the employee scans the item's barcode into the spreadsheet named "SCAN." Formulas and code on the "reference" sheet look for the SKU number in the list from the CSV file while others create a consolidated list of SKUs that have been scanned, SKUs that have a problem and need to go to customer service, and SKUs from the CSV file that have yet to be scanned. Some of the formulas in this workbook have been borrowed from forums like this and altered to fit my needs - I'll admit I'm not even entirely sure how they work.
Occasionally a SKU is scanned in twice and not always sequentially which will effect the total item count. It can be very difficult to find the duplicates in the list.
I would like for any value that appears more than once in column B of the 'SCAN' sheet to be highlighted. I have tried to do this, but to no avail.
Scan Below
FWD: CS?
If FWD: CS, state reason below:
Status
NOT SCANNED
FWD to CS
SHIPPED
3
4
149
0113MSU1018
[Code] ......
I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.
View 9 Replies View RelatedI have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?
In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.
1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2
Tab 2, Column A, has Unique ID's (6 digit numeric values)
The user manually inputs the ID's on new rows in Column A
Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's
When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).
One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.
I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.
The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I am looking for a simple non ARRAY formula (OFFSET)? that will use range A1:E5 to create a new range which will include cells A1, B2, C3, D4, E5 (the diagonal). The sum of this formula would give: 30 ...
View 9 Replies View RelatedI have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...
View 9 Replies View Relatedis there any easy way to take the sum of a really lond diagonal? I know i could use a macro, but I was wondering if there was a way to do it with formulas, the sums will ultimately be used for a graph,
View 9 Replies View RelatedWithout VBA, how do I sum diagonals such as N2 and N3, but also like N7 where the values are limited to row 13? Hopefully, the post illustrates better than my words...
View 9 Replies View RelatedI am stumped on coming up with a dynamic formula that calculates a value based on an increasing number of "sums of products". Specifically, I need to calculate the total number of repeat users based on a "decaying' repeat rate. In other words, I need it to calculate = Sum[... +(d5*f5)+(d4*g4)+(d3*h3)]
or in equation form:
where
n = (1, "infinity")
and
i = {1, 2, ... (n-1)}
with
"Xn" is the calculated value of repeat users for month "n" (output/result cell)
"mi" is the number of new users (in month i)
"Nn-i" is the column 'number' of the repeat rate value (%) multiplier
Here is a screenshot of the first couple rows to illustrate:
I actually have about 70 months of data (rows) and roughly the same amount of columns representing a decaying repeat rate (70 or so) and these will be increasing as time goes on so I need this formula to be dynamic (i.e. - copy it down the column of (# of repeat users)
I am using Excel for Mac 2011.
I have a table with changing length of the rows and columns. I need to calculate the sums of the rows, the columns ad the diagonal. I managed to write a working code for the columns, but have no success with the rest. Here is what I have:
View 4 Replies View RelatedI am trying to get my formula to reference directly to the right of the look up value but it keeps returning the diagonal value that is located to the right and up one cell.
excel 1.jpg
excel 2.jpg
I have made a toggle button to turn diagonal borders on and off in a single cell. Is there a way to make the button transparent, such that the button can be placed over the cell itself and the contents of the cell will be visible underneath, no matter the condition of the toggle?
View 8 Replies View RelatedI'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedI have a file which is divided into 2011, 2012, 2013 and 2014 years in column A. I want these data in different column according to year. For example, Column E(2011), Column F(2012), Column G(2013) and Column H(2014).
Attaching sample a file with sample data to be converted.
It is also to be in consideration that data in column B and C should not be repeated and all year data should come in front of it.
I want this by coding or formula only. I dont want to use pivot table for this.
Expecting Result.jpg
Macro for a repetitive task. I have data in every 3rd column (max of 11 columns) that I want to extract and append the data in column A in sheet 2. The data contains some blank cells and I'd like to remove them also.
I've attached an example in this workbook : tractdata.xlsx
I'm looking for a way to sort dates from several columns into a new single column (perhaps multiple columns if the entry columns become too numerous). I've included an example. There are currently only 4 columns, but there may be as many as 20 in the future, each with 20 dates under each heading. Any blank cells would be eliminated. If I filled a blank with a new date, that date would be placed into the chronological column. So basically, this would take the date from several different categories and create a single calendar of events.
View 8 Replies View RelatedI have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies View RelatedI have a file that I need to do a text to column separated by comma and then transpose results to a single column. See exaple below
File
AreaZone
0886518
1801315
1801413
1801524, 25
1804214, 16, 18
Results:
AreaZone
0886518
1801315
1801413
1801524
1801525
1804214
1804216
1804218
I am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx‎
I have a single cell comprising A|B|C| A. How do i get the unique values? Also, any chance to count the variables.
View 2 Replies View Related