Array Of Values To Single Column?

Aug 16, 2012

Ok I'm writing an extraction formula. I've got my array of Trues and Falses, but now I need to go through each row and check if all the columns are TRUE, and then return the row if all the columns are true.

Right now I'm just working with a dummy set of data... my real table is some 50 columns wide and over 300 rows, but this gives you the idea of what I'm doing:

I tried putting in a Countif and using it like and array to count the different rows and return the number of times each row was returned... but countif goes nuts when you try an array for the criteria.

Formula:
=IF(IFERROR(($H$2:$J$13/B$1:D$1)>=1,TRUE),1,0)*IF(IFERROR(($H$2:$J$13/$B$2:$D$2)

View 8 Replies


ADVERTISEMENT

How To Return Multiple Values From Array In Single Cell

Jul 2, 2014

I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.

I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:

To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).

I already have it working for returning a single value with the following formula but need it to return multiple values.

=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")

View 1 Replies View Related

How To Return Multiple Values From Array In Single Cell

Jul 2, 2014

I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.

I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:

To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).

I already have it working for returning a single value with the following formula but need it to return multiple values.

=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,
MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP
(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")

View 1 Replies View Related

Lookup Single Value In One Array, And Return Multiple Values

May 30, 2006

I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.

View 9 Replies View Related

Excel 2010 :: Add Single Record To Multiple Column Listbox In A Loop From Array

Mar 19, 2014

Win7/2010

I have an array PeopleList(6,320) that contains

PersonID, FirstName, LastName, Email, Phone, Notes

What I'm trying to do. I have two separate requirements:

(1) To add the whole array to a listbox on form initialization - see Sub UserForm_Initialize()
(2) To clear the listbox and re-add only certain items based on what's typed in a textbox - see Sub txtSearchTerm_Change()

I have two errors:

Error 1 in UserForm_Initialize()

The listbox contents need transposing! It is displaying as

Code:
1 2 3 4 5
Tom Ben Heidi Julie Mark
Smith Jones Evans Simpson Petersen
x@yo.com a@bo.com c@do.com e@fo.com g@ho.com
02071001022 02071001026 02071001027 02071001028 02071001029
Friend

When it should be displaying as
:
Code:
1 Tom Smith x@yo.com 02071001022 Friend
2 Ben Jones a@bo.com 02071001026

Is there a way to transpose the array?

Error 2 in txtSearchTerm_Change()

I cannot find anywhere - even on MSDN - all the information I need how to correctly add a single record to a multiple-column listbox! What I'm trying is:

Code:
For i = 0 To UBound(SearchList) If InStr(1, SearchList(i), SearchTerm) 0 Then
With lstPeople
.AddItem
For j = 0 To UBound(PeopleList, 1)
.List(c, j).Value = PeopleList(j, i)

[Code] ......

How do I add a record to the listbox????

Full code for reference:

Option Explicit

Private PeopleList As Variant
Private SearchList As Variant
Private Sub UserForm_Initialize()

[Code] .......

View 5 Replies View Related

Diagonal Values Into A Single Column

Feb 15, 2007

Does anyone know of a macro that can take values in a daigonal and put them in a single column?

Like for example... if you refer to the attached image, I basically would like to select all the diagonal values in red then put them all in a single column.

View 7 Replies View Related

Highlight Duplicate Values In A Single Column

Mar 6, 2013

I created a spreadsheet for use by the shipping department where I work. We are trying to prevent pulling and shipping the incorrect item to the customer. This is how it works. The employee downloads a CSV file containing items that have been purchased from our website and imports the file into the excel. Then the item is pulled and the employee scans the item's barcode into the spreadsheet named "SCAN." Formulas and code on the "reference" sheet look for the SKU number in the list from the CSV file while others create a consolidated list of SKUs that have been scanned, SKUs that have a problem and need to go to customer service, and SKUs from the CSV file that have yet to be scanned. Some of the formulas in this workbook have been borrowed from forums like this and altered to fit my needs - I'll admit I'm not even entirely sure how they work.

Occasionally a SKU is scanned in twice and not always sequentially which will effect the total item count. It can be very difficult to find the duplicates in the list.

I would like for any value that appears more than once in column B of the 'SCAN' sheet to be highlighted. I have tried to do this, but to no avail.

Scan Below
FWD: CS?
If FWD: CS, state reason below:
Status
NOT SCANNED
FWD to CS
SHIPPED

3
4
149

0113MSU1018

[Code] ......

View 5 Replies View Related

Updating Number In A Single Cell From A Series Of Values In Column?

May 22, 2014

I am trying to read a value in cell A1 and make say cell B1 read the same. The data in cell A1 is a real time percentage value that gets updated every lets say 10 secs. Every time the data is updated the new value goes into the next cell A2, A3, A4..... and so on. Every time it gets updated (i.e into A1,A2,A3,A4.....and so on), I want to read the new value each time in B1.

View 9 Replies View Related

Array Of Only Unique Column Values

Aug 13, 2007

I need to capture a list of unique usernames appearing in a column on the sheet, and also the number of times each user has a desired value occur for their row (an error). The number of users and the names of the users will change from one sheet to the next making a static solution unworkable. The user names will be unsorted in the column.

My first reflex is to use an array, and an associative array if possible would allow me to reference the user by name, instead of a clumsier index number and iterating through a loop to verify if the user is already stored in the array. I don't know if it's possible in VBS though. I'll add any new users names to this array if they aren't already in there.

View 9 Replies View Related

Return Range Of Numerical Values In Single Column Based On Frequency Percentage

Oct 25, 2005

I have a single column of numerical values that may repeat many times within
the column.

I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered so only take into account Visible Filtered Cells.

The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.

The Formula should Return two numeric values: a Start Value and an End Value
NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.

The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.

View 9 Replies View Related

Copy Individual Data Values In One Column To Single Cell Location On Multiple Sheets?

Jan 24, 2014

I am trying to come up with the most efficient way to copy data to multiple sheets within the same Excel workbook. The original data exists within one column on a summary sheet (could have up to 500 individual entries). I want to copy each individual entry to a unique sheet (that already exists), but in the exact same cell location within each sheet. I would only want to copy the original data value and not any formatting. Is there an efficient way to do this?

In my example spreadsheet, the original data is on the SUMMARY sheet. Sheets A through J would be the target sheets, with cell B2 as the target location for each of those sheets. My example shows the result of a manual copy paste value process, but I am hoping to automate that.

View 14 Replies View Related

Randomize 0 And 1 Values In Array In Order To Get Specific Sum By Column And Row

May 8, 2013

I have a table like the one below, only it has a few hundreds of rows and columns and I need a solution in order to fill in the blank spaces with 0 and 1 in order to get the total by row and by column. Is there any way to do this with a formula/macro ?

1 May
2 May
3 May
4 May

a

2

b

[code]....

View 4 Replies View Related

Excel 2010 :: Formula To Determine If Duplicate Values Exist In Single Column (excluding Empty Cells)

Jun 29, 2012

1 workbook, 2 worksheets (or tabs). On tab 1, I want a formula/alert that tells the user if any duplicate values exist in Column A of tab 2

Tab 2, Column A, has Unique ID's (6 digit numeric values)

The user manually inputs the ID's on new rows in Column A

Row 1 is reserved and in use for something else
Row 2 is my header, so cell A2 says "ID"
Row 3-623 currently contain unique ID's

When the user inputs a new ID into cell A624, then they return to Tab 1, I want my formula/alert on Tab 1 to tell the user that they have duplicates in Column A of tab 2. I know the Conditional Formatting, but if the user copies in 100 new values, they won't necessarily see the highlighted cells. My tab 1 is my "checks and balances" and the last place the user is suppposed to look to ensure that they haven't created any duplicate ID's. If the user sees a warning message that says duplicates exist, then I'll tell them that they need to look at column A (for cells that have been conditionally highlighted).

One issue that I'm running into with the conditional highlighting is that I want cells A3:A1048576 to already have the conditional formatting - this way when the user inserts a value into Cell A624, then A625, etc they conditional formatting is already there. Right now with data in cells A3:A623, cells A624:A1048576 are all highlighted with the Red/Bold Red Font (which is okay I guess), but ideally it would be nice to not count 2+ empty cells as duplicates and I'll have to have my formula on Tab 1 not include the blank cells.

I DO NOT want to use the Remove Duplicates feature of Excel 2010. If I remove them I could be removing data in columns B, C, D, etc that belong to the Unique ID. I just need the user to be told in Tab 1 that they DO have duplicates and I'll train the user how to research this and fix it.

The reason I want to look for duplicates in the entire Column A is because the list of Unique ID's will grow over time.

View 9 Replies View Related

Lookup Multiple Values In A Single Cell (separated By Commas) And Then Return The Values To A Single Cell (also Comma Separated)

Jan 7, 2009

If I have, in one cell (call it D1):

EH,DR,HU

and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E

I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...

eg...

F,G,H

View 9 Replies View Related

Multiple Lookup Values Rows And Columns To Lookup Single Target Column On Right End?

Apr 7, 2014

I have a table of data (say Column1 to Column 5) with multiple rows.

Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.

I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.

It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.

View 3 Replies View Related

Multiple Row, Single Column Cell Blocks Into Single Row, Multiple Column Format

Mar 21, 2008

I have a text file containing internet explorer browser history. The file has data in the following format (in Excel all data is in 1 column): ...

View 9 Replies View Related

Get A Single Cell To Look At An Array

Mar 10, 2009

What Im trying to do is get a single cell to look at an array, if there is a number in that array which is between 2 limits to return that number. This is eventually going to work with limits of dates/times, and have to be updated once a day. Ive attached a workbook with an example of the data and the way I want it formatted. {=IF(AND(A1:A25>=D32,A1:A25<E32),A1:A25,"")}

But this always returns a false. I can get it to work without using array and just having cell to cell logic but this means I would need the same amount of columns in the formatted data as the raw which is impractical.

View 5 Replies View Related

Formula To Multiply Single Value By Array Then Sum?

Mar 29, 2013

I am looking for an excel formula that will allow me to perform the following logic: if a cell value in (M3:BA3)="D" then multiply C29 by the corresponding value in (M29:BA29), then sum all of the products.

View 2 Replies View Related

Single Element Of An Array Is Equal To A Particular Value

Jun 20, 2008

How can you test that no single element of an array is equal to a particular value?

View 9 Replies View Related

Sumproduct Of 2 Criteria In A Single Array

Jul 16, 2007

I want to use Sumproduct function to sum up the values that belong only to Product "PXT" and "PCT". I enter it as array but my formulae doesnt work. can someone give me a hand. Here is my formulae: =SUMPRODUCT((C2:C10="PXT")*(C2:C10="PCT"))*(A2:A10)

ABCD
1ValueQtyProduct
2299.944PXT
3186.53PXT
4711.071PCA
5561.862PCT
6608.961PXT
7520.026PCT
8427.682PCA
9397.341PCA
10387.664PCT

View 2 Replies View Related

String Array Values To Array Of User-Defined Types

Oct 2, 2008

I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:

View 4 Replies View Related

Conditional Format Array From Single Cell

Feb 25, 2009

This has been kicking my can all morning! Should be simple. I'm trying to conditionally format an array from the value of a single cell.

=IF(A1<80, A3:A24,RED,0)
=IF(A1>80,A3:A24,GREEN,0)
=IF(A1>120,A3:A24,BLUE,0)

View 2 Replies View Related

Single Cell Array Or Sumproduct Formula

Jun 16, 2009

To calculate the result for a month is easy, but I can't figure how to get a single cell formula to calculate for the year. The sample attached explains it better.

View 4 Replies View Related

Text String To Single Character Array?

Jul 13, 2012

There is a method to use ROW(1:10) within an array formula to strip a string into individual elements e.g.

HELLO > {"H","E","L","L","O"}

I cannot find it anywhere, thought it was something like =MID(A1,ROW(1:10),1) but not yielding results.

View 4 Replies View Related

Create Single Array From Multiple Ranges?

Sep 10, 2012

I'm trying to create a single array from multiple ranges... I'm not sure what syntax to use:

Code:
Dim dat4() As Variant
Set r = Sheet13.Range("rsqlassetid")
Set r2 = Sheet13.Range("rsqlparentcat")
dat4() = (r , r2)

I can create an array with multiple columns from a range if the columns are next to each other but in this instance they're not.

These 2 ranges both have the same number of rows and I'm trying to combine them into a 2 column array, but not sure how to make it work without looping, rediming the array and using a secondary array to preserve the data...

View 9 Replies View Related

Creating Array Of Number From A Single Cell Value

Jan 17, 2014

I had some number combinations as this 5-23-34-233, 50-233-34-45, 34-5-23-45-67. The length can be variable in column A.

I want a formula which should return array of numbers of each cell in column A. So if A1 has 5-23-34-233 so the formula should return array like {5,23,34,233} and like wise.

View 8 Replies View Related

Table Of Calculations Down To A Single Array Formula

Feb 9, 2010

I'm trying to condense a table of calculations down to a single array formula, but am getting stuck on one piece of it.

The table data is very simple, and can be in just two columns:

1, value
2, value
3, value
4, value
5, value

Where 1 thru 5 are time periods, and values are various numbers.

I want to perform the GammaDist function on each value. It requires a time period input, and in this case it is the 1 thru 5 in the table. So at the end of period 5, the formula for the first value would be

=Gammadist(5,x,y,TRUE) (x,y values not important here)

and the formula for the second value would be:

=Gammadist(4,x,y,TRUE)

The only thing that changes is the period number.

So, my goal is to write an array formula that will sum the GammaDist for each of the 5 rows, for all timeperiods (which is 5 in this case)

I can get this far:

={SUM(B1:B5*GAMMADIST(ROWS(1:5)-1,C1,C2,TRUE))}

But this passes 1 thru 5 to all rows, I only want 1 thru 5 passed to row 1, 1 to 4 passed to row 2, etc.

View 9 Replies View Related

Function To Return Single Dimensioned Array

Jan 3, 2008

I am trying to write a function that returns a single dimension array from inputed data. I want this to work for any data, i.e. a single cell, an array in vba or a range. I am using the "for each" staement. However, when I pass an array in the "for each" returns the same range, rather than the elements of the range. I've played around a bit, and the "for each" does what I want on an range if I am not passing the range to a function. Is it because I am passing the range into a function as a variant? Here is the code for the function.

Public Function CreateSingleDimensionArray(ByVal dataToConvert) As Variant

Dim vHolder As Variant
Dim vArray As Variant
Dim lElementCount As Long

lElementCount = 0
For Each vHolder In dataToConvert
lElementCount = lElementCount + 1
Redim vArray(1 To lElementCount)
vArray(lElementCount) = vHolder
Next vHolder
CreateSingleDimensionArray = vArray

End Function

View 4 Replies View Related

Rank Records From Multiple Sections Of Single Array?

Jan 3, 2012

I am trying to rank records from multiple sections of a single array. Since there are over 100 sections I want to use a formula. Using the MATCH function I have the first row for each section of the array (Col D below). The psuedo code of what I'm trying to do is:

RANK(B1,Bfirst row of section:Bfirst row of next section -1)

Example (results in Column C):

A B C D
1 West 100 3 1
2 West 150 1 4
3 West 125 2
4 East 50 3
5 East 75 2
5 East 140 1

I will also need to increment the section as I complete each section of the array. Am I trying to do too much in a single cell??

View 1 Replies View Related

Convert Byte Array Containing Floating Point To Single

Sep 6, 2007

I have a byte array that contains a 4 byte floating point number. How would I convert this byte array to the single typed floating point number it contains?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved