I am using time based on the 1904 calendar, this is so time can be shown as a minus figure when to cells are taken away and the result is say -17:25. What I want to do via conditional formatting is show any minus hours as red. Tried various options but I have had no luck so far. or can this be done via VBA?
View 6 RepliesI'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.
View 3 Replies View RelatedI have a time calculated and I want to know, Out of that time how much is above or below 8 hours.
Ex. 1: 7:30 - 8 = [result] "-:30" mins
Ex. 2: 11:00 - 8 = [result] "3:00" hours
OR
How can I convert 7:30 into 7.5 [decimal] and then subtract that from "8" to get the difference?
I know this is an easy one, I have done it many times before. It's crunch time and I am drawing a blank.
to calculate how long a ticket is open in our system before being resolved. I don't want to count weekends, and if the ticket is 'suspended', I don't want to count that either. There is also the factor that the ticket 'un-suspend' date may be later than the ticket 'closed' date. Which is the bit that's throwing me.
So, I have the following fields
Ticket Open, Ticket Closed, Ticket Suspended Date, Ticket Unsuspended Date
A sample ticket might be (using above fields)
02/11/09 09/11/09 04/11/09 30/11/09
That 'should' equal two days (16 hours) as the Unsuspend date falls after the close date so it was suspended from the 4th until closure.
Now I want to know, in hours (8 hour day) how long that ticket took to resolve (i.e close), remembering you can't count the time it was suspended, or any time that fell over a weekend. Also not all tickets are suspended.
basically I am trying to make a time calculator for work, I want it to automatically add the hours up but then also minus break times and then give me a whole paid total hours worked that week.
CALCULATOR.xlsx
If a person does a full day I want the formula to calculate how many hours minus 30 mins for lunch i.e. 7:30 - 4:00 = 8 hours. I have done this and it works fine, the problem comes when a person does a half day i.e. 7:30 - 11:30, this will read 4.5 hours. If this is the case I don't want the 30mins deducted so it should be 4.0 hours worked.
I have high lighted a column in the work sheet (yellow) whereby the user puts an 'x' in the appropriate cell if they are working a half day.
The probem is I cannot incorperate the two formulas in one cell (the Actual hours cell) I have the one formula in the actual hours cell and the other bolted on the end thus giving two different readings.
I have a data of complaints where I need to present it to the Management in such a way that the SLA period of 8 hours does not pass. Our office working hours are 7 AM till 7 PM. The complaint received should be escalated to concern section within 8 Hours of SLA time. I have the list of dates with received time. The complaint which could not be escalated today would be escalated next day. In this case is should deduct 12 Hours (7 PM to 7 AM, Non-working hours) from the time. How can I insert escalation date so as that it would deduct non working hours from it.
View 5 Replies View RelatedI have devised a simple formula when a member of staff enters a date and time into a cell it starts deducting from todays date and time. ie:
Cell A1 - Date and time is entered by staff
Cell B1 - Is the above cell +24hrs
Cell C1 - NOW()
Cell D1 - B1-C1 Formatted in hours ( [h] :mm:ss (Like a count down clock)
The problem i have is that i cannot get Cell D1 to show minus ours it just goes to negative and shows continous #####. Is there any way i can get Cell D1 to show the hours it has gone minus by.
I have a requirement of calculating time spent on ticket, basically a difference between the time a ticket was logged and when it was resolved.
First, working days are Saturday through Wednesday, i.e weekends are Thursday & Friday.
Second, there are different resolver groups or teams which work on a ticket. These teams have different working hours, some work from 07:30 to 15:30 on weekdays, and others work 24/7. Each ticket will be assigned only to one resolver group.I also need to consider holidays.
So, my requirement is to check the resolver group for each ticket, and decide the working hours based on it. After this check has to be done for holidays, and then difference between logged time and resolved time needs to caluculated in minutes.
Tickets can be logged at any time of the day / week, it may not always be logged during working hours only. in such cases calculate should consider next business day / hour as the start time.
Raw data for tickets is available in =Sheet1!$A$1:$E$21
Ticket NoResolver GroupLogged DateResolved DateTime Spent123456
Team A5/21/2012 1:56:28 PM5/29/2012 2:10:53 PM343543Team B5/21/2012 9:31:02 PM5/27/2012 3:41:22 PM853732
Team C5/22/2012 2:28:06 PM5/26/2012 2:34:31 PM
[Code].....
I needs a formula (not VBA) to calculate the required start date.
I have to do a job of 14 working hours and this job must be finished on 05-may-2014 13:00
My working week is from monday u/i friday and every day I work from 08:00-16:00
At what time do I have to start the job to get it done in time.
The formula should give this result: 01-may-2014 15:00
I'm running some macros that take a bit of time (1000-2000ms), and would like to give the user some feedback as to what's happening.... Ideally, I'd like to show a msgbox-like pop-up window saying something "processing..." while the macro executes.
I have tried using userforms (based on this post Excel VBA Macro- How to Create a Splash Screen for your Excel Workbook); however they halt background execution...
Is there any built-in functionality similar to .statusbar, but more obvious/visual that would allow this? I'm about to experiment with showing/hiding a textbox shape, but this seems a bit sloppy...
As you can see on the example i have TEST hours.xlsx, I have a file that calculate the money every doctor should take based on the working hours.
Nights, holidays and holiday night have different price/hour.
The excel is working fine…but now I have to make a formula that separates automatically based on the beginning time and the end time of the doctor’s shift the day hours tha night hours, the holiday hours and the holiday nights hours.
In the excel I have fill the hours Manuscript, I need a formula to do that for me…
On the yellow cell I have try to find out the formula for the holiday hours but because the day is calculated due to a formula it is not working!!!
Simple Example: A doctor Is working from 21:00- 8:00 (next morning Sunday) he should have 1 simple hour (21:00-22:00) 9 night hours (22:00-6:00) and 2 holiday hours (6:00-8:00,)
In column A I have a date AND time entered. By the way, this is not via cell format, I have manually entered, say today's date and the current time. In column B I have a future date and time.
Basically, column A is the date and time a problem was given to me. Column B would be the date and time I resolved the problem. Now for the formula....Column C needs to spit out whether the problem was solved between 24 and 48 hours OR less than 24 hours OR greater than 48 hours.
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie :
Difference between
02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
=TEXT(B15,"[h]")&" Hour"&IF(OR(TEXT(B15,"[h]")+0=0,TEXT(B15,"[h]")+0>1),"s "," ")&MINUTE(B15)&" Minute"&IF(MINUTE(B15)1,"s ",""))
Format Time Cell For Greater Than 24 Hours: Hours & Minutes Only .....
View 9 Replies View RelatedI'm having difficulty to calculate hours between 2 or 3 days exclude non working hours.
Attached is the example of start date with time & end date with time.
The situation is like "when the case log in till the case assist in working hours." so i will get the hours from case log to case assist.
Testing.xlsx‎
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
View 3 Replies View Relatedfind a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours
B3 = start time
C3 = end time
D3 = day hours workeds =24*IF(E10
A1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
I am making a schedule and I would like it to take out a 30 min break if the hours worked is over 6 hours.
I have so far
A B
1 11:00 7:30
=24*(B1-A1)
Gives me 8 hours, I would like it to subtract the 30 minutes only ifthe sum is over 6 and not alter the sum if it is under 6.
1) The output of an excel duration is : 22.00:8.00:25.00 ( day:hour:minutes ) - excel cannot average and work with this number format
2) resolution - =(LEFT(L2,4))+MID(L2, FIND(":",L2)+1,4)/24+MID(L2, FIND(":",L2,7)+1,4)/1440 as an array and Custom Format the cell as [h]:mm - works perfectly.
Q: to be conistent, the initial reporting is dd:hh:mm and then I convert to hh:mm so that excel can process the data. How can I convert from hh:mm to dd:hh:mm so that the excel report can be consistent in presenting the data to senior management?
example attached.
I am attempting to convert a spreadsheet of times (listed in the format 06:15:39.62, where 06 is the hour, 15 is the minutes, 39 is the seconds, and .62 is in truncated miliseconds) into fractions of hours (so, 6.25 [NOT 6:25!]). I've so far been doing it manually for each value, which is quite tedious (doing basic division of seconds and minutes into hours, to find the fraction) but I'd like a single formula which I can then apply to the whole spreadsheet.
View 2 Replies View RelatedI am trying to compute a running total of hours (from row 1) in row 2 Example................
As you can see, when the sum exceeds 24 (moving to the right across row 2) the answer resets, so to speak. Cells are formatted as time. This format *seems* incapable of recognizing quantities of hours over 24 except as days, as it were. This is obviously useful in most sorts of cases but not in this sort of case.
If I simply want the aggregate number of hours expressed as such am I doomed to failure whenever the total exceeds 24? In reply to a somewhat similar enquiry elsewhere in this forum, advice was given to format a cell as Elapsed Time. I dont see such a choice in my dropdown menu.
i need to convert second to Hours and mins and can do so using:
View 3 Replies View RelatedI have part if the code here’s
PHP
Range("f" & indexI + 1).Value = Format(Strl, "00:00")
to return value = time formats
How do I modify it to + 0.1 minus?
Sample
IF the return value = 12:00:00
Now I wanted = 12:00:01
Trying to work out the formulas for placing plus minus variables above and below a cell as per worksheet attached. right hand side of the page
View 2 Replies View RelatedHow can i produce "tan to -1 " in excel ?
View 9 Replies View RelatedI use a formula that has a date in it 11/15/13 for example. Then I have a formula that calculates "days" (15), but I want to subtract one. How do I do that?
View 2 Replies View Related