Display Top 3 Numbers
Jul 2, 2009I have a set of numbers:
Example:
2
3
5
6
7
8
9
1
Is there a formula that can display the top 3 numbers in that data set?
Expected results:
9
8
7
ADVERTISEMENT
Do Not Display Negative Numbers
Oct 19, 2008I have a very simple formula which is basically one cell minus another "=A1-B1".
When the values are equal, the cell this formula is in will display a zero. However, when the subtracted figure is greater than the first figure, i will then get a minus figure E.g. 10-11 = -1.
How can i make it that when the formula result is less than zero (i.e. a minus number) the figure displayed stays at zero but still using the minus funciton? Basically once it hits zero i need it to stop subtracting. This may be really simple but i cant figure it out.
Display Just Numbers In A Column.
Nov 19, 2008I have a column with some cells containing just numbers, some cells containing numbers and letters and some cells containing just letters. I would like to know how to display just the cells that contain numbers only, without deleting any of the other cells.
Display Month Name For Numbers 1 To 12
Oct 10, 2007I have some numbers in the cells A1:A50. All the numbers are between 1 and 12. Say if A1=5, B1 should be May, if A2=12, B2=December...
View 4 Replies View RelatedDisplay Missing Sequential Numbers?
Apr 17, 2013I have a sheet where one column has sequencial numbers from lowest to highest with some missing. So for example: A1 1, A2 3, A3 5, A4 6. Is there a formula that will display all the numbers that are missing from this column without skipping rows? So let's say: B1 2, B2 4 ect.
Basically I will be putting this on a different tab, so someone can go to that tab and see what numbers have not been used. It is a large range and is difficult for someone to scan through it all.
Display All 8 Digit Numbers That Have The Digits 1-8 In Them
Jul 16, 2008I need a way to display all 8 digit numbers that have the digits 1-8 in them. (ie. 12345678 but NOT 12345679 OR 12345677) Also If I could somehow divide by 13 then check for whole numbers
View 14 Replies View RelatedDisplay Numbers Based On Counts
Oct 17, 2011I have a series of numbers going down from max to min in column M, in column N I have the number of counts of the same numbers.
The Modal value is calculated by a formula and already displayed in cell F3 (it needs no modification).
What I am trying to do is this:
1) Identify the address of the same modal value in column M.
2) From the modal values address in column M, search Column N searching upwards and downwards from the modal value address, until the first instance of the pre-specified count number is identified.
3) When the pre-specified count number is identified look beside in the cell in column M and display the value beside that pre-specified count in cell.
We stop at the first instance of that prespecified count both when 1) counting upwards and 2) counting downwards.
The upper value is displayed in F2 and the lower value is displayed in F4.
An example would be.
1 1
2 2
3 3
4 4
5 6
6 1
7 2
8 3
9 4
10 1
The modal value is 5 looking beside it as it has 6 counts, so in the count column we search upwards from the count of 6 until we encounter the pre-specified number of 4, then we look beside the count of 4 and observe that the number 4 above the modal value has 4 counts hence we display the number, now we search downwards from 6 counts until we reach the first instance of 4 we find it and the cell beside it contains the number 9 so we display the number 9.
The end result is numbers 4 and 9 that have 4 counts each.
Display Plus Sign For Positive Numbers
Nov 20, 2006If you have a formula lets say ( sum A1-A2) and the total is negative i.e. A1 is 100, A2 is 50 would return -50, how do you get the value to show a plus sign if the value is positive? i.e. if A2 is 100 and A1 is 50, excel would simply show 50, but I'd like it to show +50. Also, if the result is 0, so both A1 and A2 are 50, how do I get Excel to display the words On Forecast in a cell?
View 6 Replies View RelatedDisplay Positive Numbers As Negatives
Feb 29, 2008I would like to be able to enter numbers into a cell as a positive number, but have them actually display as negative in that cell.
View 2 Replies View RelatedRemove The Display Of The Leading Zero In Decimal Numbers
May 15, 2009Is it possible to remove the display of the leading zero in decimal numbers of less than one in Excel 2007?
View 3 Replies View RelatedDisplay A Number If It Matches One Of The Numbers In The 9 Cells Above It
Nov 2, 2007K so basically i have a cell where based on the above formulas it displays a number.
What i want it to do is only display a number if it matches one of the numbers in the 9 cells above it. so for example
cell1:2
cell2:4
cell3:6
cell4:8
cell5:1
cell6:9
cell7:89
cell8:0
cell9: 11
and i want the number to display only if it is one of the numbers shwon above.
Date Formula To Display In Text Without Numbers
Dec 18, 2009I want to show a date like 18-12-2008. This wil normal work with =()TODAY-356
But when I output text with this formula it will only show numbers:
="date "&TODAY()-365&""
I want to subtract 1 year of today.
I tried to set my cell to the date format but this did not work.
Seeking Way To Display Numbers Underlying Formulas
Jan 12, 2007I'm looking for an answer about how I can show the numbers underlying a
nested IF function. The formula works fine, but I need to be able to show
how I arrived at the numbers that I did. Here is an example of one of the formulas:
=IF(B9=1,(B4*Data!G5*Data!F5),IF(Calculations!B10=2,(Calculations!B5*Data!G5*Data!F5),IF(Calculations!B11=3,(Calculations!B6*Data!G5*Data!F5),0)))
Instead of the reference to the cell, I would like the formula that the cell represents. I know that I could go through individually and pull each piece apart with control F9, but since there are numerous cells and because the data changes every time I create a new budget, it would help if I could have some way to display it all with one action.
Chart X-Axis To Display Specific Numbers
Jan 10, 2008I am trying to format my x-axis to list only the labels that have corresponding data points, but at the same time maintain appropriate number spacing. For example, My x-axis range is 0-90; however, I only want tick marks at 0, 5, 13, 40, 85.
View 4 Replies View RelatedDisplay Random Numbers As Generated On UserForm
Jan 28, 2008I have developed some VBA code which produces a 'lucky number' using the RND function. The final number is produced by concatenating three individually generated random numbers between zero and 9. When the code is written in a Module, I can display each number as it is generated, by 'pausing' the macro with a For Next loop.
I have now developed a similar application using a MultiPage Userform, but the individual numbers are not displayed when I use exactly the same code. The only way I have found to display each number as it is generated is to use
Application.Wait
However the shortest wait time seems to be 1 second, which is too long. I would like to be able to make the MultiPage version look like the Module version.
I attach a workbook which shows both of the above.
Dates Display As Numbers Even With Date Format
Jun 20, 2008dates column displays numbers even though the format in the format cell options is date format.
the number updates to date format only when i do F2 & enter for each cell. i've about 5000 cells with same problem. how cani do them all in a go instead of doing themone for a time.
Display Account Numbers Where Stock Items Are Not Present?
Sep 3, 2013I have a list of account numbers with stock attached to each account. I want to show all account numbers that do not have any one of 5 items attached to it. See my attached (simplified) example, show all accounts that dont have Bananas or Oranges, account number 222 and 444 would be displayed.
View 5 Replies View RelatedMacro To Display Top 5 Most Frequently Occurring Part Numbers
Mar 17, 2014I'd like to create a macro to display the top 5 most frequently occurring repairs on sheet 3 of my workbook. I'd like the macro to analyse all the sheets in my workbook except for the first 3 and then output the results on the 3rd sheet from T50 onward. I have attached a template as an example of how all the sheets in the workbook look (excluding the first 3).
All the sheets have the same layout as the "Survey Template" worksheet.The repairs are located under the Log Book Review of Historical Structural Repair in the Survey Template worksheet and all the repairs are picked through a drop down list that is based on a table of repairs listed in the Parts and Prices sheet within the workbook. I have assigned random serial numbers to the repairs (if that makes it any easier to code instead of locating exact string matches).
ExampleSurveyTemplate.xlsx
Display Line Numbers Against The Code In The Visual Basic Editor?
Feb 26, 2008Is there any way I can display line numbers against the code in the Visual Basic Editor?
Or can I see in the current line number in the status bar?
or GoTo Line number?
Match Identical Numbers In Two Columns And Display Unmatched Results?
Feb 25, 2014I have two columns with hundreds of identical data and i need to match in column A with an identical data in column B.
The tricky thing is there are many identical data. Each identical data needs to match with another identical data in column B and then, remove matched data.
So, i need to display whats left unmatched in column A and in column B.Match Identical Data.xlsx
Here is an example:
Column A
100
200
300
400
100
Column B
400
200
300
100
500
Ending results should be showing unmatched "Column A: 100" & "column B:500"
I also attached a excel.
Excel 2013 :: Making Numbers Display With Color Based On Text Inputted In Different Cell?
Nov 20, 2013EXPENSE MASTER 2013 sample color.xlsx
I have numbers that will display in column G. I have payment types entered in column E. So if 'C FUEL','FA','C M/C', is entered in column E I want the number in column G to be red.
Cell Referenceing (display The Value In The Cell Offset By X So I Can Bring The Numbers From Sheet1 Over)
Jul 17, 2009Sheet1 is a list of names, then a few columns of numbers.
Sheet2 contains calculations based of the numbers in sheet1.
Each sheet from 2 on is names after the names in sheet1 column A...
A large cell at the top of each sheet contains the formula to display the sheet name:
=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,255)
So what I want to do now is...
in cell, look for the cell in sheet1, and display the value in the cell offset by X so i can bring the numbers from sheet1 over.
In plain english the cell would say like...
"look in sheet1 for "Name" then display the cell next to it"
I know to look in the next sheet its "=Base!B2" if i wanted b2 on sheet base.
I know to use "=OFFSET(Base!B2, , 1, , )" too look at B2 and go right 1 column.
But the issue is i dont want Base!B2.. i want whatever cell in Base column A that has the text that A1 has.
Cell B1 To Display True If Any Of The Values In Column C Match Otherwise I Want To Display FalseOR Function Confusion
Dec 16, 2008Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
Formatting / Display - Field Not Display 0 If It Is Empty On WHITE Sheet
Mar 14, 2013I have attached the spreadsheet for reference. All other sheets pull information from the WHITE sheet.
I want the columns for unit price, discount and total to be set to two decimal places but I also don't want it to show anything if the field has a 0 value (so if i only have a few items I don't get lots of o's).
To get the field to not display a 0 if it is empty on the WHITE sheet I have been using "0;-0;;@" which I found on the net. If I use this then it negates the two decimal places.
This also includes the WHITE sheet.
Using VLOOKUP To Display Date If Present, If Not Display Today's Date
Feb 26, 2009I'm currently using an IFERROR, VLOOKUP formula to display an availability date for a product.
Atm, it reads some like this
Time Display / Non Display.
Jun 1, 2009I have 2 columns E and F that I am using, in Column E, I enter a time say 22:43:00, column F currently ads 15 minutes to what ever is in there with '=E3+TIME(0,15,0)' which is fine except if column E has no time in it when it automatically puts in 00:15:00, hov can I get the cell not to display anything in there is no value in column E.
View 2 Replies View RelatedIf Number Is Positive Display In D20 - If Number Is Negative Display In D19?
May 12, 2014I'm trying to create a completion statement on where I will add up the money my client has sent to me and also add up the money I need to pay out in order for them to complete their transaction. The end result I want is I would like to display whether my client has given me to much money and I need to repay them. Or if they haven't given me enough then I need to invoice them. I need excel to display for me after all the figures have been added and subtracted if the end figure is negative then display in D19 (balanced owed to you). If the end figure is positive (Balance required from you) display in D20.
View 12 Replies View RelatedDetect Numbers In A Cell Range And Then Change Cells Based On What Numbers Are Found?
Feb 27, 2014I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
Split Range Of Numbers From One Cell Into Column Of Multiple Cells All With Individual Numbers
Mar 5, 2012I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
Excel 2010 :: Formatting Numbers Written In Text To Numeric And Pulling Only Numbers Out
Feb 20, 2013I am extracting data from a website to excel 2010. my problem is the data contains both text, numbers, and sometimes a combination of both.
e.g. hi im ron for more information you can reach me at 6 five 6 four 5 seven 7 three 2 two..
I need it to look like this 6564577322 or 7 * 0 * 2 * 4 * 5 * 6 * 8 * 6 * 2 * 1...i need to look look the same
How do i first format the numbers written in text into numbers and then show only the numbers in a cell minus the text?