Match Identical Numbers In Two Columns And Display Unmatched Results?
Feb 25, 2014
I have two columns with hundreds of identical data and i need to match in column A with an identical data in column B.
The tricky thing is there are many identical data. Each identical data needs to match with another identical data in column B and then, remove matched data.
So, i need to display whats left unmatched in column A and in column B.Match Identical Data.xlsx
Here is an example:
Column A
100
200
300
400
100
Column B
400
200
300
100
500
Ending results should be showing unmatched "Column A: 100" & "column B:500"
I also attached a excel.
View 1 Replies
ADVERTISEMENT
Apr 21, 2014
I am creating a database using excel and I've created a userfrom for ease of data entry and searching the database. But now I am stuck at the searching part.
The sheet is Sheet1 and the userform is UserForm1. Based on the pic that i have attached, user needs to key in the keywords in any of the textboxes and comboboxes in the group box labelled "Organizational detail" and when he/she clicks on the Search button, the userform will display the whole rows where the search results reside onthe listbox. When the user click on the search results on the listbox, the textboxes and comboboxes will be updated with the data on the listbox.
View 3 Replies
View Related
Oct 26, 2007
Is there a function to compare 2 columns to find all of the values from one column that are not in the other column? Basically my data looks like this:
A........................B.................C
procedure1...........................225-3
........................ 25-1...........22-2
.........................33 .............457
procedure2...........................33-55
.......................35-12...........25-6
.......................12-8.............25-1
procedure3...........................33-89
.....
I have another list of data (just the numbers like columnB) that I want to put in column C and see what is in column C that isn't in column B. The numbers will be arranged in a different order, and there will be data in column B that isn't in column C. What I need to do is find out what is in column C that isn't in column B so that I can go back and define what procedure they fit into (that is a seperate process).
View 2 Replies
View Related
Feb 20, 2008
I have a list of data which doesnot match with my database and am hence failing to understand what to do.
2 sheets attached.
Was trying to find the employee ids of the advisors from the database.
View 9 Replies
View Related
Aug 20, 2009
I'm working on two almost identical lists but because of their nature, some rows are repeated on one of the sheets and so on. I need help matching some cells onto the other sheet. I tried the VLOOKUP formula but it doesn't work since some rows are repeated... I need the match to link especifically a Name with it's correspondent Value, regardless of the position of the name in either of the sheets and whether it is repeated or not.
View 7 Replies
View Related
Feb 24, 2009
I have over 2000 rows with 20 columns and i need to find and remove identical rows. I can do a match with MATCH() by concatenating the columns and comparing them as a whole but i need to apply this to the whole table and i need it to remove all the duplicate rows it finds.
View 5 Replies
View Related
Sep 23, 2007
I have some problem with my data here. I have created a formula to compare the numeric value between the column. I want to have the results in the column but the results I have is wrong. Did i did something wrong with the formula?
I wanna compare the value from A2 and C2, B2 and D2. If the results is correct, then is will display true value in e2 else will display false value in e2.
when i compare 2.3oz and 2.25oz, the value displayed is true which is wrong, it should display "false"
I have attached the file here...
View 3 Replies
View Related
Aug 22, 2007
I am trying to join 2 tables which have identical columns. The columns are:
A B C D E F
Date : Name : ID : Violation : Date Sent : Comments
Table 1 has information in columns A-E, Column F is blank
Table 2 has information in columns A-F.
I want to be able to check the information in Columns A-E in both tables and add the information in Column F from Table 2 to Table 1 where Columns A-E are an exact match.
View 9 Replies
View Related
Feb 19, 2010
I’m putting together a blackjack odds calculator. I could use some help with a formula. If I have an A,7 (ace low) it needs to return a 0 (or false) for a “Possible Hand” because further down the column A,7 (ace hi) has a true “End Hand Total”
I was going to use an IF and a VLOOKUP (looking lower on the column), but then I cannot sort the column. Is there a formula that will find the hand and check for true 2 columns over from identical hand. There are 169 starting hand combinations. The attached worksheet only has 31 – for simplification.
View 2 Replies
View Related
Aug 8, 2007
I found a useful resource on the web that gives a macro that deletes rows when the cells within a SINGLE column are identical. [url]
Does anyone know of a macro that can do more than that, one that will delete rows if ALL cells within ALL columns are identical?
For example, the macro should delete row 4 of the attached spreadsheet. It should leave row #2 there because it's the orginal row. But the duplicate row #4 should be deleted. The macro should leave row #5 there because not all columns are identical for that row.
View 9 Replies
View Related
Dec 16, 2008
Example:....
i m wanting Cell B1 to display true if any of the values in column C match otherwise I want to display false.
A 1
B 0
C 0
D 0
But I can't determine how to get this done.
View 5 Replies
View Related
Apr 16, 2014
I have a userform that simply filters data on a spreadsheet through checkboxes. The form is filtering columns (B through N) to shorten the list of possible outcomes (data in column A.) After the user is done with the form I'd like to populate the data in column A (the results from filtering and there is no way to pre-determine how many rows will have data) with the user pressing a button on the form, into something the user can see without going back to the spreadshet. I was thinking I could populate the results into some field on the form; maybe a list box, txt file, using the camera function in Excel?
View 2 Replies
View Related
Nov 14, 2006
I have written an array formula which you can see in the, "Done something cool in excel" bit on here. Part of this project was to changed/replace three diffence cells on each pass of the loop. I used some code off here which allowed me to display ALL changed on a seperate sheet, but there way way to much data on here and really confused the user. What i would like to do is; in 1 column, for it to say "CHANGED" if the data has changed "EXSISTING" if it hasnt changed and "NEW" if its been added, this will be referencing Column I.
View 7 Replies
View Related
Oct 10, 2011
If the results are < or = to 60, then I want result to be green. If the result is > 60, then I want to result to be red
View 2 Replies
View Related
Aug 17, 2012
Just yesterday when I opened my excel file, all the cells that contains formulas does not display the results (leaving the cell blank).
For example the formula for cell A1 is =B5. But after putting a value in cell B5, cell A1 is still blank.
View 4 Replies
View Related
Oct 17, 2012
I've put together a workbook that has 2 sheets that contain stock details and location info (i.e. part number, description, Location & stock level). I need to have a search function outside of the 'built-in' Ctrl+F (or Edit > Find) search function, i'd assume this would mean using VBA?I invisiage making a userform embedded within the very first sheet of the workbook and having this form be opened when accessing the worbook - maybe hide the other two sheets containing the data? Within the search userform, i would have a 'part number' & 'description' search input boxes for data input, either one could be blank but atleast ONE must be inputfor the search to work. On pressing the 'Search now' command button in the userform, any reults found would be displayed in a listbox at the bottom of the said userform. If no results found, a dialog box would pop-up saying 'No Items Matched"
View 7 Replies
View Related
Jun 26, 2014
I am looking for the best way ( or choice of ways) to display the correlation between 2 lists of results.
I have a column of failure percentage rates for engineers that I want to compare against a second column of their compliance rate with a process. There are two levels also. The first set shows the good performers and their compliance, the second showing the poor performers.
My goal is to see whether their compliance with the process has any bearing on their failure rates. The full lists contain data on approximately 400 engineers in each category
(if the the numbers below are not in a proper format, I tried to download the excel converter thingy but the link failed)
faliure rate
Compliance
3.95%
91.40%
[Code]....
View 1 Replies
View Related
Apr 27, 2006
I have a spreadsheet with 2 columns, 'A' is the property number and street name, and 'B' is the year the work is going to be done on the property.
I have a form with a textbox and command buttons, now what I want to do is allow the users to enter property number and street in textbox1 and click commandbutton1 to search. If it finds a match I want a small message to come up and say either the year the work will be done (column B) or 'no match found'.
View 8 Replies
View Related
Aug 4, 2006
how to make a formula to only display the results shown when using the filter..........
View 2 Replies
View Related
May 29, 2014
I'm currently using this formula:
=INDEX(B4:B64,MATCH(I5,A4:A64,0))
If I5's value is displayed more than 1 time in Column A, I want the information in Column B to appear in the same cell the formula is in in Column J
View 3 Replies
View Related
Dec 21, 2013
How to do this query but show all results found rather than just one result.
I want the result to be able to show multiple terms from the search terms and index.
for example
Bob's BMW and Ford
Result would be
BMW,Ford
Rather than just Ford
Is this possible?
View 8 Replies
View Related
May 28, 2007
I have very little experience with programming, as a matter of fact the code in the sample file is the extent of my knowledge. I want to use Excel because not everyone in the plant has access to Access, but everyone has Excel.
The idea is to allow searching for parts based on 2 different part numbers, category, drawer, manufacturer, or description (any or all).
My first problem is how to make excel search using a userform and find multiple results, not just stopping after it finds the first match. For instance if you only searched for a category it should find all results that match that category.
(I'll try to anticipate a question here: the part numbers should be unique but may not be, so using the part number as a key will not work.)
The second thing is I would like to know how to populate these results in a listbox and and have the selected part show the matching picture. (This maybe more clear after seeing the spreadsheet).
And finally, is there any way to make the comboboxes on the search userform populate themselves off of the list of data.
I apologize if any of these questions have been answered already but frankly I've been searching google for the past week and haven't found anything, (This may attest to my search skills as well, ha ha ha), and I really just want this to be finished.
View 14 Replies
View Related
Jan 17, 2009
I have a database of 13 columns and ever increasing rows.
I want the following to be there on my userform.
1 combobox: showing the list of categories from which to search.(The categories are the column headings in columns A1 to A13.The user will have to select one category.
1 textbox:Here the user will enter the search term.
1 Command Button: When the command button is clicked/entered, the code shall be such that it will search in the column corresponding to the category mentioned in the combobox and display the results( The entire 1 row x 13 cloumns containing the search term) in a Listbox. If the search term does not matches then a message box should appear with the message "No entries found"
[b]
1 Listbox:to display the search result as mentioned above.
View 13 Replies
View Related
Sep 16, 2009
I'm using a userform to report on set of worksheets. Two of the functions are:
- reporting on the number of contacts with a client
- displaying the details of all contacts with selected client in one textbox.
I can't work out how to concatenate the text of all the contacts relating to one client in a text box (txtContactHist) on the userform.
Using the countIf function I'm trapping zero matches.
The worksheet containing the contacts has the following data columns:
Col A - Customer ID
Col B - Detail of contact
Col C- Date of Contact
Columns B and C contain the data I want to capture
Column A (the customer ID) is the column that is searched for a match ( via the userform text box (txtLic.Value))
To work out the total number of contacts, I use this bit of ...
View 6 Replies
View Related
Feb 25, 2012
I am using excel as a scheduling program. The sheet has days of the month across the top, and staff names down the column. We have 5 shifts D,A,B,C,N. I am using the following formula to display if shifts have been scheduled for the column
if(countifB10:N23,"N")=1,"X","N") i.e for the night shift. I then use conditional formatting to change the cell to green if the night shift has been scheduled, or red if it has not.
I would like to have the results of all 5 formulas display in a single cell, to save Real Estate, then have the cell go green when all shifts have been scheduled for the day (column).
Is this even possible?
View 3 Replies
View Related
Oct 15, 2013
I have a need to combine multiple columns into a long list of results in 2 final columns. Here is my example...
Current layout with varying number of data points per row...
ColumnA | ColumnB | ColumnC | ColumnD | etc...
example1 | Test1 | Test2 | Test3 | Test4
example2 | Option1 | Option2
example3 | Number1 | Number2 | Number3 | Number4 | Number5
Desired Result
ColumnA | ColumnB
example1 | Test1
example1 | Test2
example1 | Test3
example1 | Test4
example2 | Option1
example2 | Option2
example3 | Number1
example3 | Number2
and so on and on and on until all rows have been filled in down the file...
Is this possible?
View 4 Replies
View Related
Apr 9, 2014
how to set one entire columns text to two different colors based on another columns values. So for example I have column A and B. Column A has two values called Internal and External. Column B is a title table so the entire column is just titles. We'll say it goes for 20 rows if you need a row count. What I am looking to do change the text in Column B to Red for External and Blue for Internal. I tried the conditional formatting and I just can't seem to find the right option.
I'm using Win 8.1, Office 2013.
View 4 Replies
View Related
Apr 23, 2008
I would like to create a user form that will display the results from a lookup formula. The userform would have 2 textboxes, so from the formula below BZ109 would be textbox1 and CA109 textbox2. Once data is entered in these textboxes you would hit submit to return the results in a message box. What would the code be for the sumbit button?
=VLOOKUP(BZ109, INDIRECT(CA109), 11, 0)
View 9 Replies
View Related
Aug 26, 2009
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
View 6 Replies
View Related
Mar 31, 2007
I have a summary list of all projects that my employees work on over the course of the month. Its gets sorted by date and project and is a pretty extensive list.
My goal is simple...to search through the list and add a blank row between each project.
I have written this code, that does work, but it takes quite some time to execute and I know there has to be a better way.
Can you guys take a look at it and see if there is more efficient way to do this?
Dim myarray As Variant
Dim cell As Range
Dim mycount As Integer
Dim i As Integer
Set myarray = Worksheets("summary").Range(Range("b2"), Range("B65536").End(xlUp))
Set cell = Range("b2")
mycount = myarray.Count
For i = 0 To mycount
If cell.Offset(i, 0).Value <> cell.Offset(i + 1, 0).Value Then
Range(cell.Offset(i + 1, -1), cell.Offset(i + 1, 3)).Insert shift:=xlDown
i = i + 1
mycount = mycount + 1
End If
Next i
View 9 Replies
View Related
